Easytry123 Replacement Remote Control User Manual

Introduction

Thank you for choosing the Easytry123 Replacement Remote Control. This remote is designed to provide convenient control over your compatible Magnavox LCD HDTV. Please read this manual carefully to ensure proper setup and operation. This remote is a direct replacement for the original and does not require programming. Please note that while it is designed to be highly compatible, some specific functions of your original remote may not be fully replicated.

Product Overview

The Easytry123 replacement remote control features a standard button layout for intuitive navigation and control of your television.

Image: Front view of the Easytry123 replacement remote control. This image displays the full array of buttons, including power, source, number pad, volume, channel, and navigation controls.

Button Functions

• POWER (●): Turns the TV on or off.
• SOURCE: Selects input sources (e.g., HDMI, AV).
• PIG/SOUND: Picture-in-Graphics or Sound mode control.
• MODE: Cycles through various display modes.
• INFO: Displays on-screen information.
• CC: Activates or deactivates Closed Captions.
• PIX SHAPE: Adjusts picture aspect ratio.
• Number Pad (0-9): Direct channel selection.
• Playback Controls: Rewind, Play/Pause, Fast Forward, Stop, Previous Track, Next Track.
• OPTIONS: Accesses additional menu options.
• VOL +/-: Adjusts volume level.
• CH +/-: Changes TV channels.
• MUTE: Mutes or unmutes TV audio.
• PREV.CH: Returns to the previously viewed channel.
• BACK: Navigates back in menus.
• HOME (House icon): Accesses the TV's home menu or smart features.
• Colored Buttons (Red, Green, Yellow, Blue): Functionality varies by TV model and on-screen prompts.
• Navigation Pad (Up, Down, Left, Right, OK): Navigates menus and confirms selections.
• VUDU: Direct access button for the VUDU streaming service (if supported by your TV model).

Setup

Battery Installation

Your Easytry123 remote control requires two (2) AAA batteries (not included) for operation.

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery compartment cover downwards or press the latch and lift to open it.
3. Insert two AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Image: Back view of the Easytry123 replacement remote control with the battery cover removed, showing the empty battery slots. This illustrates where to insert the AAA batteries.

Initial Use

Once batteries are installed, the remote is ready for use. No programming or code setup is required. Point the remote directly at your Magnavox LCD HDTV and begin operating it.

Operation

To operate your TV, ensure there is a clear line of sight between the remote control and the TV's infrared sensor. Press the desired button to perform its corresponding function.

• Power On/Off: Press the POWER button once.
• Changing Channels: Use the CH +/- buttons or the number pad for direct channel entry.
• Adjusting Volume: Use the VOL +/- buttons.
• Selecting Input Source: Press the SOURCE button to cycle through available inputs (e.g., HDMI 1, HDMI 2, AV).
• Menu Navigation: Use the Navigation Pad (Up, Down, Left, Right) to move through on-screen menus and OK to confirm selections.
• Smart TV Functions: If your TV supports it, the HOME button may access smart TV features, and the VUDU button may launch the VUDU application directly.

Compatibility

This Easytry123 remote control is specifically designed as a replacement for the original remote controls of the following Magnavox LCD HDTV models:

• 50MF412B/F7
• 50MTV335WF7
• 50MTV335W/F7
• 40ME324VF7
• 46ME313V
• 46ME313V/F7
• 46ME313VF7

It is important to verify that your TV model number is listed above to ensure full compatibility. This remote is not a universal remote control and may not function with other brands or Magnavox models not explicitly listed. While designed to replace the original, some advanced or rarely used functions might behave differently or not be supported.

Maintenance

Battery Replacement

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or immerse the remote in liquid.

Troubleshooting

• Remote is not responding:
  • Ensure batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AAA batteries.
  • Check for any obstructions between the remote and the TV's infrared sensor.
  • Ensure you are within the effective range of the TV's sensor.
• Some functions are not working:
  • Confirm that your TV model is listed in the compatibility section.
  • As a replacement remote, some specific or advanced functions of your original TV remote may not be supported.
• Buttons feel sticky or unresponsive:
  • Clean the remote control as described in the Maintenance section.

Specifications

Warranty and Support

Information regarding product warranty and customer support for the Easytry123 Replacement Remote Control is not available in the provided product details. Please refer to your purchase documentation or contact the seller directly for any warranty claims or support inquiries.