Product Overview
The RHOX Red Hawk Light Kit (Model LGT-402L) is designed to provide enhanced lighting for E-Z-GO Express golf carts. This kit operates on 12V-48V systems, making it suitable for both gas and electric models. It includes OE-Fit LED projector style headlights with marker lights and RGBW accent lights, along with LED taillights, a high-quality wiring harness, a push-pull switch, injection molded plastic bezels, installation hardware, templates, and comprehensive instructions.
For electric carts, a voltage reducer (RHOX models VOLT-2000 or VOLT-2001) is recommended if additional accessories are installed to ensure stable power delivery and prevent damage to the lighting system or other components.
Image: Main components of the RHOX Red Hawk Light Kit, showing the LED projector headlights and LED taillights with their bezels.
Safety Information
- Always disconnect the golf cart's battery before beginning any electrical installation or maintenance to prevent electrical shock or damage.
- Wear appropriate personal protective equipment, including safety glasses and gloves.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Verify the correct voltage compatibility before connecting the light kit. This kit is designed for 12V-48V systems.
- If you are unsure about any installation step, consult a qualified technician.
Setup and Installation
Required Tools (Not Included):
- Drill
- Drill bits (sizes specified in templates)
- Screwdrivers (Phillips and flathead)
- Wire strippers/crimpers
- Multimeter (for voltage verification)
- Masking tape
- Marker or pencil
Pre-Installation Steps:
- Park the golf cart on a level surface and engage the parking brake.
- Disconnect the main battery pack by removing the negative terminal cable.
- Unpack all components and verify that all parts listed in the kit contents are present and undamaged.
- Review the provided templates and instructions thoroughly before starting.
- For electric carts, if a voltage reducer is not already installed and you plan to add other accessories, install the recommended RHOX VOLT-2000 or VOLT-2001 voltage reducer according to its separate instructions.
Headlight and Taillight Installation:
- Headlights: Use the provided templates to mark the cutting and drilling locations on the front cowl of your E-Z-GO Express. Carefully cut out the openings and drill mounting holes as indicated. Insert the LED projector headlights into the openings and secure them with the injection molded plastic bezels and included hardware.
- Taillights: Similarly, use the taillight templates to mark and prepare the rear body panel. Install the LED taillights and secure them with their respective bezels and hardware.
Image: An E-Z-GO Express golf cart with the RHOX Red Hawk Light Kit headlights and taillights installed.
Wiring Harness and Switch Connection:
- Wiring Harness: Route the high-quality, easy-to-install wire harness through the golf cart chassis, ensuring it is clear of moving parts and heat sources. Connect the appropriate connectors from the harness to the headlights and taillights.
- Push-Pull Switch: Install the push-pull switch in a convenient location on the dashboard or control panel. Connect the switch to the designated wires on the main wiring harness.
- Power Connection: Connect the main power wires of the harness to the golf cart's battery (or voltage reducer output for electric carts), ensuring correct polarity (positive to positive, negative to negative).
Image: The RHOX Red Hawk Light Kit wiring harness, coiled and showing various connectors and the push-pull switch.
Post-Installation Check:
- Double-check all connections for tightness and proper insulation.
- Reconnect the golf cart's battery.
- Test all light functions: headlights (low beam), marker lights, RGBW accent lights, and taillights.
Operating Instructions
The RHOX Red Hawk Light Kit is operated via the installed push-pull switch. This switch typically controls the primary lighting functions.
- Push-Pull Switch:
- First Pull Position: Activates the marker lights and RGBW accent lights.
- Second Pull Position: Activates the main LED projector headlights (low beam) in addition to the marker and accent lights.
- Push In: Turns off all lights.
- Taillights: The LED taillights typically illuminate in conjunction with the headlights and marker lights, providing rear visibility.
Maintenance
- Cleaning: Clean the headlight and taillight lenses regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the plastic.
- Wiring Inspection: Periodically inspect the wiring harness for any signs of wear, fraying, or loose connections. Ensure all connections remain secure.
- LED Longevity: The LED lights are designed for long life and typically do not require bulb replacement. If an LED fails, the entire light unit may need to be replaced.
- Waterproof Feature: While the lights are waterproof, avoid directing high-pressure water sprays directly at the electrical connections during cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on |
|
|
| Lights are dim or flicker |
|
|
| Only some lights work |
|
|
Specifications
- Model Number: LGT-402L
- Brand: RHOX
- Compatible Vehicle: E-Z-GO Express Golf Carts
- Operating Voltage: 12V-48V DC
- Light Source Type: LED
- Special Features: Waterproof, RGBW Accent Lights
- Included Components: LED Headlights, LED Taillights, Wiring Harness, Push-Pull Switch, Bezels, Installation Hardware, Templates, Instructions
- OEM Equivalent Part Number: LGT-402L
- Approximate Item Dimensions (L x W x H): 17.8 x 16.2 x 6.5 inches
- Approximate Item Weight: 10.7 pounds
- Lens Material: Plastic
Warranty and Support
Warranty Information:
This RHOX product is covered by a 1-Year Manufacturer's Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, accident, neglect, or unauthorized modification.
Return Policy:
A 30-Day Return Policy is offered for items that are not as expected. To be eligible for a return, the item must be in its original packaging and in good, undamaged condition.
Customer Support:
For technical assistance, warranty claims, or questions regarding your RHOX Red Hawk Light Kit, please contact RHOX customer support through their official website or authorized dealer. Please have your model number (LGT-402L) and proof of purchase available when contacting support.
