1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your SINOX ECO SP360 230V AC BLDC Ceiling Fan. Please read this manual thoroughly before installation and retain it for future reference. The SINOX ECO SP360 fan utilizes Brushless Direct Current (BLDC) technology, offering enhanced energy efficiency, consistent performance, and a quiet operating experience.
2. Safety Instructions
Important: Always follow basic safety precautions when installing, operating, and maintaining electrical appliances to reduce the risk of fire, electric shock, or injury.
- Ensure the main power supply is disconnected at the circuit breaker or fuse box before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- The mounting structure must be capable of supporting the fan's weight (refer to specifications).
- Do not insert fingers or any objects into the fan blades while the fan is operating.
- Ensure all electrical connections are secure and properly insulated.
- This fan is designed for indoor use only.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact SINOX customer support.
- Fan Motor Assembly
- Fan Blades (3)
- Downrod
- Canopy (Top and Bottom)
- Regulator
- Hardware Pack (screws, washers, pins)
- Instruction Manual
4. Setup and Installation
Professional installation is recommended for safety and optimal performance.
4.1 Pre-Installation Check
- Turn off power at the circuit breaker or fuse box.
- Ensure the ceiling joist or support structure can hold the fan's weight.
- Unpack all components and lay them out on a clean, flat surface.
4.2 Assembling the Fan
- Attach Downrod: Insert the downrod through the canopy and then into the fan motor assembly. Secure it with the provided pin and screw.
- Mounting Bracket: Secure the mounting bracket to the ceiling outlet box using appropriate screws and washers. Ensure it is firmly attached.
- Hang Fan: Carefully lift the fan assembly and hang it onto the mounting bracket hook.
- Wiring: Connect the electrical wires from the ceiling to the fan motor wires according to the wiring diagram (typically Live, Neutral, Earth). Ensure all connections are tight and insulated.
- Regulator Connection: Connect the fan regulator to the main power supply as per the regulator's instructions.
- Attach Blades: Secure each fan blade to the motor housing using the provided screws. Ensure they are tightly fastened.
- Secure Canopy: Slide the canopy up to the ceiling and secure it to the mounting bracket, covering the wiring.
Figure 1: Assembled SINOX ECO SP360 BLDC Ceiling Fan.
Figure 2: Exploded view illustrating BLDC technology components within the fan motor.
5. Operating Instructions
The SINOX ECO SP360 BLDC Ceiling Fan is operated via a standard wall-mounted regulator.
- Power On: After successful installation, turn on the main power supply to the fan circuit.
- Speed Control: Use the wall-mounted regulator to adjust the fan speed. Rotate the knob to increase or decrease the airflow. The fan offers multiple speed settings.
- Power Off: To turn off the fan, rotate the regulator knob to the 'OFF' position. For complete power disconnection, turn off the circuit breaker.
The BLDC motor ensures consistent performance even at lower speeds and during minor power fluctuations, while consuming significantly less energy.
Figure 3: SINOX ECO SP360 fan demonstrating regulator operation.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: Dust the fan blades and motor housing regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the fan is completely off and power is disconnected before cleaning.
- Tightness Check: Periodically check all screws on the fan blades and mounting hardware to ensure they are securely fastened. Loose screws can cause wobbling or noise.
- No Lubrication Required: The BLDC motor is designed for maintenance-free operation and does not require lubrication.
7. Troubleshooting
Before attempting any repairs, ensure the power supply to the fan is disconnected.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply; Loose wiring; Faulty regulator. | Check circuit breaker/fuse; Verify all wire connections; Test or replace regulator. |
| Fan runs slowly or inconsistently | Incorrect regulator setting; Low voltage; Motor issue. | Adjust regulator to higher speed; Check household voltage; Contact qualified technician. |
| Excessive noise | Loose screws on blades or mounting; Unbalanced blades. | Tighten all screws; Ensure blades are securely attached and balanced. |
| Fan wobbles | Loose mounting bracket; Unbalanced blades; Bent downrod. | Ensure mounting bracket is secure; Check blade balance; Inspect downrod for damage. |
If the problem persists after attempting these solutions, please contact SINOX customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | SINOX |
| Model | SP360 |
| Electric Fan Design | Ceiling Fan |
| Motor Type | BLDC (Brushless Direct Current) |
| Input Voltage | 230 Volts AC |
| Operating Voltage (Internal) | 24 Volts DC (converted by SMPS) |
| Wattage | 30 Watts (at full speed) |
| Number of Blades | 3 |
| Blade Sweep | 1200mm |
| Controller Type | Regulator |
| Special Feature | High Velocity, Energy Efficient, Noise-Free Operation, No Power Fluctuation |
| Room Type | Bedroom, Dining Room, Living Room |
| Mounting Type | Downrod Mount |
| Certification | CE |
| Winding | 100% High Quality Copper Winding |
9. Warranty and Support
Your SINOX ECO SP360 BLDC Ceiling Fan comes with a standard 2-year warranty from the date of purchase.
You can extend your warranty by an additional 1 year by registering your product online.
- Warranty Registration: Visit www.sinoxpower.com to register your product and avail the +1 Year Extra Warranty.
- Customer Support: For any technical assistance, warranty claims, or service requests, please contact SINOX customer support through the website or the contact details provided with your purchase documentation.
Figure 4: Warranty information and registration details.
