PERLESMITH Universal Table Top TV Stand User Manual

1. Introduction

Thank you for choosing the PERLESMITH Universal Table Top TV Stand. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your TV stand. Please read this manual thoroughly before installation and keep it for future reference.

The PERLESMITH PSTVS01-1 is designed to provide a stable and height-adjustable base for flat-screen televisions ranging from 37 to 70 inches, supporting up to 110 lbs (50 kg). Its robust alloy steel construction ensures durability and optimal support, while the sleek design integrates seamlessly into various home environments.

2. Important Safety Information

WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty.

• Ensure the TV stand is installed on a stable, level surface capable of supporting the combined weight of the stand and the television.
• Do not exceed the maximum weight capacity of 110 lbs (50 kg).
• Verify that your TV's VESA mounting patterns (hole spacing) are compatible with the stand (100x100mm to 800x400mm).
• Keep all small parts and packaging materials away from children, as they may pose a choking hazard.
• Always use two people to lift and position the television during installation to prevent injury.
• Tighten all screws securely, but do not overtighten to avoid stripping threads or damaging components.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

3. Package Contents

Before installation, please check to ensure all components are present and undamaged. If any parts are missing or defective, please contact PERLESMITH customer support.

• TV Stand Legs (2 pieces)
• TV Mounting Brackets (2 pieces)
• Hardware Kit (various screws, washers, spacers for TV attachment)
• Non-slip/Non-scratch Pads
• Instruction Manual

4. Setup and Installation

The PERLESMITH TV stand is designed for easy installation, typically completed in 15 minutes or less. Please follow these steps carefully.

4.1. Verify TV Compatibility

Ensure your television meets the following criteria:

• Screen Size: 37 to 70 inches
• Weight: Up to 110 lbs (50 kg)
• VESA Mounting Pattern: Between 100x100mm and 800x400mm (horizontal x vertical distance between mounting holes on the back of your TV).

4.2. Attach Mounting Brackets to TV

1. Carefully place your TV face-down on a soft, clean surface to prevent screen damage.
2. Identify the VESA mounting holes on the back of your TV.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Use spacers if the TV back is uneven or if the screws are too long.
4. Attach the two vertical mounting brackets to the back of your TV using the selected hardware. Ensure the brackets are oriented correctly (usually with the longer side pointing upwards or as indicated in the bracket design) and are securely fastened. Do not overtighten.

Image: Rear view of a television with the two vertical mounting brackets of the PERLESMITH stand securely fastened to its back. This illustrates how the brackets connect to the TV's VESA holes.

4.3. Assemble Stand Legs

1. Connect the foot of each stand leg to its vertical support. Ensure the leg is slightly angled towards the center for optimal stability, as shown in the product details.
2. Secure these connections with the provided screws and tools.
3. Apply the non-slip and non-scratch pads to the bottom of the stand feet to protect your furniture surface and prevent the TV from sliding.

Image: Detailed breakdown of the stand's components, highlighting the body, foot, non-slip/non-scratch pad, and the specific angle of the leg for stability. Dimensions of 16.93in and 12.6in are also shown.

4.4. Attach TV to Stand Legs and Adjust Height

1. With assistance, carefully lift the TV with the attached mounting brackets.
2. Align the mounting brackets with the holes on the stand legs. The stand offers 4 different height adjustment levels. Choose the desired height by selecting the appropriate set of holes on the stand legs.
3. Secure the TV mounting brackets to the stand legs using the provided screws and washers. Ensure both sides are at the same height level and are securely fastened.

Image: A visual representation of the four adjustable height settings for the TV stand, ranging from 22.4 inches to 29.5 inches, demonstrating how the TV can be positioned at different elevations.

Image: Two individuals are shown collaboratively installing a television onto the PERLESMITH stand, emphasizing the ease and speed of the installation process, indicated by a 'Less than 15 Mins' graphic.

5. Operating Instructions

Once assembled, the PERLESMITH Universal Table Top TV Stand provides a static, stable base for your television.

• Placement: Position the TV stand with the mounted television on a flat, stable, and sturdy surface, such as a TV cabinet or desk.
• Stability Check: Gently push the TV to ensure it is stable and does not wobble excessively. If wobbling occurs, re-check all connections and ensure the surface is level.
• Cable Management: Route TV cables neatly to prevent tripping hazards and maintain a clean appearance.

Image: A lifestyle shot showing a television securely placed on the PERLESMITH stand, situated on a contemporary TV cabinet. This demonstrates the product's aesthetic integration into a home environment.

6. Maintenance

• Cleaning: Wipe the stand with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
• Periodic Check: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
• Damage: If any part of the stand becomes damaged, discontinue use and contact customer support for assistance.

7. Troubleshooting

8. Specifications

• Model: PSTVS01-1
• Brand: PERLESMITH
• Material: Alloy Steel
• Color: Black
• Compatible TV Sizes: 37 - 70 inches
• Weight Capacity: Up to 110 lbs (50 kg)
• VESA Compatibility: 100x100mm to 800x400mm
• Height Adjustment: 4 levels
• Item Weight: 6.56 pounds (2.98 kg)
• Mounting Type: Tabletop Mount
• Movement Type: Fixed

Image: An illustration detailing the product's key features, including its compatibility with televisions ranging from 37 to 70 inches and its maximum weight capacity of 110 pounds.

9. Warranty and Customer Support

PERLESMITH is committed to providing high-quality products and excellent customer service. For any pre-purchase questions, installation assistance, or warranty inquiries, please contact our US-based customer support team.

Please refer to the product packaging or the official PERLESMITH website for the most current warranty information and contact details.

Contact Information:

• Manufacturer: PERLESMITH
• Website: Visit the PERLESMITH Store on Amazon
• For direct support, please consult the contact information provided with your product packaging.