Introduction
Thank you for choosing the A&B Home T26 Filament LED Clear Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Important Safety Information
- Electrical Safety: Always turn off the power supply at the main circuit breaker before installing or replacing the bulb.
- Proper Base: Ensure the bulb's E26 base matches your fixture's socket type.
- Indoor Use Only: This bulb is designed for indoor use in dry locations. Do not expose to water or excessive moisture.
- Voltage Compatibility: This bulb operates on 100-120 Volts AC at 60 Hertz. Verify your electrical supply matches these requirements.
- Handling: Allow the bulb to cool completely before handling. Avoid touching the bulb with bare hands immediately after use.
- Disposal: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.
Setup and Installation
Follow these steps to safely install your A&B Home T26 LED bulb:
- Turn Off Power: Locate the light fixture's power switch and turn it to the OFF position. For added safety, turn off the power at the main circuit breaker.
- Remove Old Bulb (if applicable): If replacing an existing bulb, ensure it is cool to the touch. Unscrew the old bulb counter-clockwise from the socket.
- Inspect Fixture: Check the light fixture for any damage or loose wiring. Ensure the socket is clean and dry.
- Install New Bulb: Carefully screw the A&B Home T26 LED bulb clockwise into the E26 socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the main circuit breaker, then flip the light switch to the ON position to test the bulb.
Image: A&B Home T26 Filament LED Clear Bulb. This image displays a clear tubular LED bulb with visible orange filament strips inside, and a standard E26 screw base at the bottom, ready for installation.
Operating Instructions
The A&B Home T26 Filament LED Clear Bulb operates like a standard light bulb. Once installed in a compatible E26 fixture and power is supplied, it will illuminate when the fixture's switch is turned on. This bulb provides a warm white light (soft white) with 400 lumens of brightness.
Maintenance
This LED bulb requires minimal maintenance:
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically check the bulb and fixture for any signs of damage or loose connections.
- Replacement: While LED bulbs have a long lifespan, replace the bulb if it flickers, dims significantly, or stops working.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up | No power to the fixture, loose connection, faulty bulb | Check power switch and circuit breaker. Ensure bulb is screwed in tightly. Test bulb in another working fixture. |
| Bulb flickers | Loose connection, incompatible dimmer switch, power fluctuations | Tighten bulb. Ensure dimmer switch is LED compatible (if applicable). Consult an electrician for power issues. |
| Bulb is too dim | Incorrect wattage for desired brightness, aging bulb | Verify the bulb's lumen output meets your needs. Replace bulb if it's nearing end of life. |
Specifications
| Feature | Detail |
|---|---|
| Brand | A & B Home |
| Model | T26 |
| Light Type | LED Filament |
| Wattage | 4 Watts |
| Bulb Base | E26 |
| Bulb Shape Size | Tubular (T) |
| Light Color | Warm White, Soft White |
| White Brightness | 400 Lumens |
| Voltage | 100-120 Volts AC |
| Frequency | 60 Hertz |
| Indoor/Outdoor Usage | Indoor |
| Material | Glass Housing, Ceramic Cog (Inner LED Strip) |
| Product Dimensions | 1"W x 7.3"H |
| Item Weight | 1 Pound |
| Special Feature | Long Lasting, High Efficiency |
| UPC | 805845758815 |
Warranty and Support
For specific warranty information or technical support, please refer to the product packaging or contact A&B Home customer service directly. Keep your purchase receipt as proof of purchase.