Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Defiant Electronic Deadbolt Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Defiant Electronic Deadbolt offers convenient keyless access with a touch keypad, along with the security of a traditional mechanical key. It is designed for use on garage, entry, home office, computer room, or utility room doors.
Safety Information
Always follow basic safety precautions when installing and operating this product to reduce the risk of injury or damage.
- Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
- Use only the specified battery type (not included).
- Keep keys in a secure location away from the lock.
- Ensure all components are securely fastened during installation.
Package Contents
Verify that all parts are present before beginning installation:
- Exterior Keypad Assembly
- Interior Assembly with Thumb Turn
- Deadbolt Latch
- Strike Plate
- Mounting Screws
- Keys (2)
- Installation Template (if applicable)
Image: Included components such as keys, strike plate, and the cylinder housing.
Installation Guide
Tools Required: Philips screwdriver (included), measuring tape, pencil.
- Prepare the Door: Ensure your door has the standard bore holes for a deadbolt. If not, use the provided template (if applicable) to drill necessary holes.
- Install the Latch: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Secure with screws.
- Install Exterior Keypad: Feed the cable from the exterior keypad through the cross bore hole. Align the keypad with the latch and press it firmly against the door.
- Install Interior Assembly: Connect the cable from the exterior keypad to the interior assembly. Align the interior assembly with the mounting posts from the exterior keypad and secure with screws. Ensure the thumb turn operates smoothly.
- Install Strike Plate: Install the strike plate on the door frame, aligning it with the deadbolt latch. Secure with screws.
- Insert Batteries: Open the battery cover on the interior assembly and insert 4 AA batteries (not included), observing polarity.
- Test Operation: Test the lock with the mechanical key and by entering a default code (if any) or a newly programmed code.
Image: The electronic deadbolt assembly, showing the interior mechanism and exterior keypad.
Image: Exterior view of the electronic deadbolt installed on a door, showcasing the keypad.
Operating Instructions
Programming User Codes
The lock can hold up to 10 user codes and 5 single-entry codes.
- Enter Programming Mode: Locate the program button on the interior assembly (usually on the battery cover or near the battery compartment). Press it once. The keypad will illuminate.
- Add New User Code: Enter your desired 4-digit user code. Press the Lock button (padlock icon) to confirm. The lock will beep to confirm successful programming.
- Delete User Code: Enter programming mode. Enter the 4-digit user code you wish to delete. Press the Lock button. The lock will beep to confirm deletion.
Locking and Unlocking
- To Unlock: Enter your 4-digit user code on the keypad. The keypad will illuminate, and the deadbolt will retract after a few seconds.
- To Lock (from outside): Press the Lock button (padlock icon) on the keypad. The deadbolt will extend after a few seconds.
- To Lock (from inside): Turn the thumb turn on the interior assembly to the locked position.
Auto-Lock Feature
The lock features an auto-lock function with an adjustable delay from 10 to 99 seconds. Refer to the full programming guide (usually a separate sheet or detailed section in the manual) for instructions on enabling and adjusting this feature.
Image: Close-up of the electronic keypad for code entry.
Maintenance
- Cleaning: Clean the lock with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
- Battery Replacement: When the battery indicator light flashes or the lock makes a low battery warning sound, replace all four AA batteries. Use only new, high-quality alkaline batteries.
- Lubrication: Periodically lubricate the deadbolt mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the keypad.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad does not light up. | Dead batteries or incorrect battery installation. | Replace batteries, ensuring correct polarity. |
| Lock does not respond to code. | Incorrect code entered, code not programmed, or lock is jammed. | Verify code, reprogram code, check for obstructions in door frame or latch. |
| Deadbolt does not extend/retract fully. | Misalignment of strike plate or latch, low battery. | Adjust strike plate, replace batteries. |
| Lock beeps continuously. | Low battery warning. | Replace batteries immediately. |
Specifications
- Brand: Defiant
- Model Number: 9a843b7d-eaac-472e-b6d2-4b1006f6f6a5
- Lock Type: Electronic Deadbolt
- Material: Bronze
- Style: Modern
- Special Feature: Keyless Entry, Back-up Mechanical Key
- User Codes: Up to 10
- Single Entry Codes: Up to 5
- Auto-Lock Delay: 10-99 seconds (adjustable)
- Power Source: 4 AA Batteries (not included)
- Item Weight: 2.26 pounds
- Package Dimensions: 7.48 x 5.51 x 4.61 inches
- UPC: 050134991163
Warranty and Support
For warranty information or technical support, please refer to the official Defiant website or contact their customer service. Keep your purchase receipt for warranty claims.
Online Resources: Visit the Defiant website for FAQs, additional guides, and product registration.
Customer Service: Contact Defiant customer support for assistance with installation, programming, or troubleshooting issues.
