Sonic Alert SBB500SSBLK

Sonic Alert Sonic Bomb SBB500SSBLK Dual Alarm Clock with Bed Shaker Instruction Manual

Model: SBB500SSBLK

1. Product Overview

The Sonic Alert Sonic Bomb SBB500SSBLK is a dual alarm clock designed to provide effective wake-up alerts through multiple methods. It features an extra loud audible alarm, a powerful vibrating bed shaker, and flashing red lights. This device is suitable for heavy sleepers and individuals with hearing impairments, ensuring timely wake-up calls.

Key features include:

Sonic Alert Sonic Bomb SBB500SSBLK Dual Alarm Clock with Bed Shaker

Image 1: The Sonic Alert Sonic Bomb SBB500SSBLK alarm clock unit with its connected bed shaker.

2. Package Contents

Verify that all items are present in the package:

3. Safety Information

4. Setup

4.1 Power Connection

  1. Plug the power adapter into the DC IN jack on the back of the alarm clock.
  2. Plug the other end of the power adapter into a standard wall outlet. The display will illuminate.

4.2 Battery Backup Installation

A 9V battery (not included) can be installed to maintain time and alarm settings during a power outage. The alarm clock will not function fully (e.g., loud alarm, shaker, lights) on battery power alone.

  1. Locate the battery compartment on the bottom of the unit.
  2. Open the battery compartment cover.
  3. Insert a new 9V battery, observing the correct polarity (+/-).
  4. Close the battery compartment cover securely.

4.3 Connecting the Bed Shaker

The bed shaker provides a powerful vibration to assist with waking. Connect the shaker's cable to the "SHAKER" jack on the back of the alarm clock.

Bed Shaker Placement Options

Image 2: Recommended placements for the bed shaker unit, such as under a pillow, under a fitted sheet, or under the mattress.

Place the bed shaker under your pillow, under a fitted sheet, or between your mattress and box spring for optimal vibration transfer.

5. Operating Instructions

5.1 Setting the Time

  1. Press and hold the TIME button until the display flashes.
  2. Press the HOUR button to adjust the hour. Observe the PM indicator for afternoon hours.
  3. Press the MINUTE button to adjust the minutes.
  4. Press the TIME button again to confirm and exit time setting mode.
  5. To switch between 12-hour and 24-hour format, press the 12/24 HR button (if available, otherwise it's usually part of the time setting sequence).

5.2 Setting Alarms (Alarm 1 and Alarm 2)

The clock features two independent alarms.

  1. Press and hold the AL. SET button until the display flashes and "AL1" or "AL2" is shown.
  2. Use the HOUR and MINUTE buttons to set the desired alarm time.
  3. Press AL. SET again to switch to the next alarm or to confirm the setting.
  4. To activate an alarm, slide the ALARM ON/OFF switch to the desired alarm (AL1 or AL2).

5.3 Adjusting Alarm Modes (Vibration, Buzz, Combo)

Use the VIB/BUZZ/OFF switch on the side of the unit to select the desired alarm output:

5.4 Snooze Function

When the alarm sounds, press the large SNOOZE button to temporarily silence the alarm. The alarm will sound again after the set snooze duration.

To adjust the snooze duration (1-30 minutes):

  1. While the alarm is not active, press and hold the SNOOZE button.
  2. Use the FAST or SLOW buttons to adjust the snooze time.
  3. Release the SNOOZE button to save the setting.
Adjustable Snooze and Alarm Duration Settings

Image 3: Visual representation of adjustable snooze time (1-30 minutes) and alarm duration (1-59 minutes).

5.5 Adjusting Volume and Tone

Use the VOL and TONE rotary knobs on the side of the unit to adjust the loudness and frequency of the audible alarm.

5.6 Display Dimmer

The display brightness can be adjusted to one of five levels. Use the DIMMER button (or slider, depending on model variation) to cycle through the brightness settings.

Five-Level Display Dimmer

Image 4: Illustration of the five available brightness levels for the digital display.

6. Maintenance

6.1 Cleaning

To clean the alarm clock, wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.

6.2 Battery Replacement

If the battery backup is installed, replace the 9V battery annually or if the clock loses time during a power outage. Follow the steps in Section 4.2 for replacement.

7. Troubleshooting

ProblemPossible CauseSolution
Clock display is off or flashing.No power or power interruption.Ensure the power adapter is securely plugged into the clock and a working wall outlet. Check if the 9V battery backup is installed and functional.
Alarm does not sound or vibrate.Alarm is not activated, volume is too low, shaker is disconnected, or alarm mode is set to OFF.Verify the alarm is set and activated (AL1/AL2 indicator on). Check the VIB/BUZZ/OFF switch is not set to OFF. Adjust volume and tone. Ensure the bed shaker is properly connected.
Time is incorrect.Time was not set correctly or power interruption occurred without battery backup.Reset the time as per Section 5.1. Install a fresh 9V battery for backup.
Display is too bright or too dim.Dimmer setting is not preferred.Adjust the display dimmer using the dedicated button/slider.

8. Specifications

9. Warranty Information

This Sonic Alert product is covered by a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For detailed warranty terms and conditions, please refer to the official Sonic Alert website or contact customer support.

10. Customer Support

If you encounter any issues or have questions regarding your Sonic Alert Sonic Bomb SBB500SSBLK alarm clock that are not addressed in this manual, please contact Sonic Alert customer support.

You can find more information and contact details by visiting the official Sonic Alert Store: Sonic Alert Store

Related Documents - SBB500SSBLK

Preview Sonic Bomb SBB500SS Loud Dual Alarm Clock: Instruction Manual and Features
Detailed instructions and features for the Sonic Bomb SBB500SS Loud Dual Alarm Clock by Sonic Alert. Learn how to set time and alarms, choose waking options, use volume and tone controls, battery backup, and connect accessories like lamps and bed shakers.
Preview Sonic Alert SB300ss Sonic Boom Alarm Clock with Bed Shaker User Manual
Comprehensive user manual for the Sonic Alert SB300ss Sonic Boom Alarm Clock with Bed Shaker. Includes detailed operation instructions, features, setup guides for time, alarm, and vibrator, warranty information, and safety warnings.
Preview Sonic Alert SBC575ss Sonic Boom Dual Alarm Clock & Bed Shaker - Operation Instructions
Detailed operation instructions for the Sonic Alert SBC575ss Sonic Boom Dual Alarm Clock and Bed Shaker, including setup, alarm functions, features, and safety warnings.
Preview Sonic Boom Alarm Clock & Bed Shaker SBB500SS-v3 Operation Manual
Detailed operation instructions for the Sonic Alert Sonic Boom Alarm Clock & Bed Shaker, Model SBB500SS-v3. Learn how to set alarms, time, use test mode, and understand features like the bed shaker and battery backup.
Preview Sonic Boom SB200ss Travel & Bedside Alarm Clock with Bed Shaker - Operation Manual
User manual and operation instructions for the Sonic Alert SB200ss, a travel and bedside alarm clock featuring a bed shaker, adjustable tone and volume, and battery backup.
Preview Sonic Boom Dual Alarm Clock with Bed Shaker Model SBD375ss-v3 Operation Instructions and Warranty
Comprehensive operation instructions, features, setup guide, and warranty information for the Sonic Alert Sonic Boom Dual Alarm Clock with Bed Shaker, Model SBD375ss-v3.