Introduction
The Satisfyer Mr. Rabbit is a dual-stimulation vibrator designed for both G-spot and clitoral pleasure. Crafted from skin-friendly silicone, it features two powerful motors and 12 distinct vibration programs. This manual provides essential information for the safe and effective use, care, and maintenance of your device.
Image: The Satisfyer Mr. Rabbit Vibrator, shown alongside its product packaging, highlighting its design and branding.
Product Features
- Dual Stimulation: Designed to provide simultaneous G-spot and clitoral stimulation with its flexible shaft and dedicated clitoral stimulator.
- Waterproof Design (IPX7): The device is IPX7 rated, making it suitable for use in the shower or bath. It is protected against immersion in water up to 1 meter deep for up to 30 minutes.
- 12 Vibration Programs: Offers a variety of sensations with 6 intensities and 6 rhythmic patterns, distributed through two independent motors.
- Skin-Friendly Silicone: Constructed from high-quality, soft silicone for a comfortable and hygienic experience.
- Intuitive Control Panel: Features an easy-to-use control panel with a retaining ring for secure handling during use.
- Flexible Shaft: The main shaft is flexible, adapting to body contours for enhanced comfort and stimulation.
Image: An image highlighting the core benefits of the Satisfyer Mr. Rabbit Vibrator through icons: G-spot stimulation, silicone flex technology, multiple vibration modes, waterproof design, skin-friendly silicone, and ease of cleaning.
Video: An overview of the Satisfyer Mr. Rabbit Vibrator, demonstrating its dual motors for G-spot and clitoral massage, waterproof design, 12 vibration settings with intuitive control, ring-shaped handle, flexible silicone shaft, and magnetic USB charging cable. It also highlights the 15-year guarantee.
Setup
1. Initial Charging
Before first use, fully charge your Satisfyer Mr. Rabbit. Connect the magnetic USB charging cable to the charging contacts on the device and plug the USB end into a compatible USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes approximately 2-3 hours.
Image: The magnetic USB charging cable included with the device.
2. First Use Cleaning
Before the first use and after each subsequent use, clean the device thoroughly. Refer to the 'Maintenance' section for detailed cleaning instructions.
Operating Instructions
1. Power On/Off
- To turn on the device, press and hold the power button (usually marked with a power symbol) for approximately 2 seconds.
- To turn off the device, press and hold the power button again for approximately 2 seconds.
2. Changing Vibration Programs
- Once the device is powered on, press the program button (often marked with 'waves' or '|||') to cycle through the 12 available vibration programs.
- Each press will advance to the next program.
Image: A hand holding the Satisfyer Mr. Rabbit Vibrator, demonstrating its comfortable grip and the intuitive control panel for power and program selection.
3. Usage Recommendations
For optimal comfort and experience, it is recommended to use the Satisfyer Mr. Rabbit with a water-based lubricant. Avoid using silicone-based lubricants as they can damage the silicone material of the device.
Maintenance
1. Cleaning
- Always clean your device before and after each use.
- Wash the device with warm water and a mild, toy-specific cleaner or antibacterial soap.
- Rinse thoroughly with clean water.
- Pat dry with a lint-free cloth or allow it to air dry completely before storing.
- As the device is waterproof, it can be rinsed under running water.
Image: Water droplets on the device's surface, illustrating its waterproof capability.
2. Storage
Store the device in a clean, dry, and dust-free place, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent potential reactions or damage.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. Connect it to the charger and wait for the charging indicator to confirm. If it still doesn't turn on, try holding the power button for a longer duration (5-10 seconds) for a reset.
- Weak or inconsistent vibrations: This may indicate a low battery. Recharge the device fully. If the issue persists after a full charge, contact customer support.
- Charging issues: Ensure the magnetic charging contacts on both the cable and the device are clean and dry. Try using a different USB power source or cable if available.
- Buttons unresponsive: Ensure the device is not locked (if applicable, though not a stated feature for this model). If unresponsive, try a full charge or a hard reset by holding the power button.
Specifications
| Feature | Detail |
|---|---|
| Brand | Satisfyer |
| Model Number | S4049369016471 |
| Material | Silicone |
| Dimensions (L x W x H) | 8.66 x 1.65 x 1.65 inches |
| Weight | 7.05 ounces |
| Water Resistance Level | IPX7 Waterproof |
| Vibration Programs | 12 (6 intensities, 6 rhythms) |
| Motors | 2 Power Motors |
| Battery | 1 Lithium Ion (included) |
| Charging | Magnetic USB Charging Cable |
Warranty & Support
Warranty Information
The Satisfyer Mr. Rabbit Vibrator comes with a 15-year product guarantee. This warranty covers manufacturing defects and ensures long-lasting satisfaction. Please retain your proof of purchase for warranty claims.
Image: Icon indicating the 15-year product protection warranty.
Customer Support
For any questions, concerns, or warranty claims, please refer to the contact information provided with your product packaging or visit the official Satisfyer website for support resources.