OSTENT Wireless Bluetooth Pro Controller User Manual

Introduction

This manual provides instructions for the OSTENT Wireless Bluetooth Pro Controller, designed for use with the Nintendo Switch console. Please read this manual carefully before use to ensure proper operation and to maximize your gaming experience.

Image: Angled view of the OSTENT Wireless Bluetooth Pro Controller.

Setup

Charging the Controller

The controller is equipped with a 3.7V/380mAh rechargeable battery. For optimal performance, fully charge the controller before its first use.

• Connect the included USB charger cable to the controller's charging port.
• Plug the other end of the USB cable into a standard 5V/500mA USB power source (e.g., a USB wall adapter, computer USB port, or Nintendo Switch dock).
• The charging time is approximately 2-3 hours.
• A fully charged battery provides approximately 5 hours of continuous operation.

Image: The controller connected to its USB charging cable.

Pairing with Nintendo Switch

This controller connects to the Nintendo Switch console via Bluetooth and does not require any driver installation. Follow these steps to pair your controller:

1. From the Nintendo Switch HOME Menu, select "Controllers".
2. Then select "Change Grip/Order".
3. While the screen displays "Press L + R on the controller", press and hold the small SYNC button located on the top edge of the Pro Controller for a few seconds.
4. The player indicator lights on the bottom of the controller will flash during pairing and then remain solid once successfully connected.

Image: Front view of the controller, showing the SYNC button location near the top.

Operating Instructions

Controller Layout

Familiarize yourself with the buttons and their functions for optimal gameplay.

Image: Diagram illustrating the button layout of the controller, including Home, Start, Select, D-Pad, L/R sticks, A/B/X/Y buttons, and shoulder buttons (LB/LT/RB/RT).

• HOME Button: Returns to the Nintendo Switch HOME Menu.
• START Button (+): Typically used for pausing games or accessing menus.
• SELECT Button (-): Often used for secondary functions or menus.
• D-Pad: Directional input.
• L Stick / R Stick: Analog joysticks for movement and camera control.
• A/B/X/Y Buttons: Standard action buttons.
• LB/RB: Left and Right Bumper buttons.
• LT/RT: Left and Right Trigger buttons.
• VIB Screen Shot Button: Captures screenshots during gameplay.

Special Features

• Gyro Axis Function: The controller supports motion sensing, allowing for immersive gameplay in compatible titles.
• Dual Motors Vibration: Experience enhanced tactile feedback with the integrated dual vibration motors, providing realistic in-game sensations.
• Note: This controller does not support NFC functionality.

Maintenance

Cleaning

To maintain the controller's appearance and functionality:

• Wipe the controller with a soft, dry cloth.
• Do not use chemical solvents, abrasive cleaners, or harsh detergents, as these can damage the surface and internal components.

Storage

When not in use, store the controller properly:

• Store the controller in a cool, dry place.
• Avoid direct sunlight, extreme temperatures, and high humidity.
• Protect the controller from dropping or strong impacts.

Troubleshooting

Controller Not Connecting

If you experience issues with the controller connecting to your Nintendo Switch:

• Ensure the controller is fully charged. A low battery can prevent connection.
• Repeat the pairing process as described in the "Pairing with Nintendo Switch" section.
• Verify that the Nintendo Switch console's Bluetooth communication is enabled.
• If issues persist, try resetting the controller. Locate the small RESET button on the back of the controller (often recessed) and press it using a thin tool like a straightened paperclip.

Image: Back view of the controller, highlighting the RESET button.

Controller Not Charging

If the controller does not charge:

• Verify that the USB cable is securely connected to both the controller and the power source.
• Try using a different USB port or a different USB power adapter.
• Ensure the power source provides the specified 5V/500mA output.

Specifications

Image: Dimensions of the controller (6.1 inches length, 4.3 inches width, 2.3 inches height).

Warranty and Support

For product support, warranty inquiries, or additional information, please contact OSTENT customer service. You can also visit the official OSTENT store on Amazon for more details and contact options.

Visit the OSTENT Store on Amazon