Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Lorell Conjure Executive High-Back Mesh Back Black Chair. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.
Figure 1: Lorell Conjure Executive High-Back Mesh Back Black Chair. This image displays the full chair from a slight angle, highlighting its black mesh back, upholstered seat, and five-star base with casters.
Safety Information
- Ensure all components are securely fastened before use. Periodically check and tighten all screws and bolts.
- Do not stand on the chair. Use the chair only for its intended purpose of seating one person.
- Do not exceed the maximum weight recommendation of 275 pounds.
- Keep hands and fingers clear of moving parts during adjustment.
- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Upon opening the package, verify that all components are present and undamaged. The chair is shipped with pieces separated, but all necessary hardware and tools for assembly are included.
- Chair Back (Mesh)
- Seat Cushion (Upholstered)
- Armrests (Pair)
- Chair Base (Five-star with casters)
- Gas Lift Cylinder
- Mechanism/Control Unit
- Assembly Hardware (Screws, bolts, washers)
- Assembly Tools (Allen wrench, etc.)
Assembly and Setup
Assembly of the Lorell Conjure Executive Chair is straightforward and typically takes less than 10 minutes. All required tools are provided.
- Attach the Backrest to the Seat: Align the backrest with the seat mechanism and secure it using the provided screws and tools.
Figure 2: Attaching the backrest to the seat. A person is shown using an Allen wrench to secure the backrest to the chair's seat mechanism.
- Assemble the Base: Insert the casters into the five-star base. Then, insert the gas lift cylinder into the center hole of the base.
- Connect Seat to Base: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is securely seated.
Figure 3: Placing the assembled seat onto the chair base. A person is shown carefully lowering the chair's upper section onto the five-star base with the gas lift.
- Final Check: Ensure all connections are tight and the chair is stable before use.
Operating Instructions (Adjustments)
Your Lorell Conjure Executive Chair offers multiple adjustment options to customize your seating experience for optimal comfort and ergonomic support.
Figure 4: Side view of the chair highlighting the various adjustment levers located beneath the seat.
- Seat Height Adjustment: Use the lever on the right side (when seated) to raise or lower the seat. Pull the lever up to raise the seat; release to lock. To lower, pull the lever up while seated.
- Backrest Tilt and Lock: The chair features a tilt mechanism for the backrest. Use the lever on the left side (when seated) to adjust the backrest angle. You can lock the backrest in an upright position or leave it unlocked for a flexible recline.
- Tilt Tension Control: A knob located under the front of the seat allows you to adjust the tension of the backrest tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
- Lumbar Support: The mesh back includes adjustable lumbar support to provide ergonomic support for your lower back. Adjust its position by sliding it up or down to find your preferred comfort level.
- Seat Slider: This feature allows you to adjust the depth of the seat cushion. Locate the lever or button under the seat and slide the seat forward or backward to accommodate your leg length.
Figure 5: The Lorell chair positioned in a modern home office setting, demonstrating its suitability for a workspace.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your chair.
- Cleaning: For general cleaning, wipe surfaces with a soft, damp cloth. For upholstered areas, spot clean only. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically inspect all screws and bolts to ensure they are tight. Re-tighten as necessary to prevent wobbling or instability.
- Caster Care: Keep casters free of debris (hair, lint, etc.) to ensure smooth rolling.
Troubleshooting
If you encounter issues with your chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Backrest does not stay in position or slides down. | Locking mechanism not engaged or faulty; loose connection. | Ensure the backrest lock lever is fully engaged. Check the screws connecting the backrest to the seat mechanism and tighten if loose. |
| Chair wobbles or feels unstable. | Loose screws or improper assembly of the base. | Verify all screws and bolts are securely tightened, especially those connecting the seat to the mechanism and the base components. Re-assemble if necessary. |
| Seat height adjustment not working. | Gas lift cylinder malfunction or lever issue. | Ensure the height adjustment lever is functioning correctly. If the gas lift cylinder is faulty, it may need replacement. |
| Chair makes grinding noises when tilting. | Tilt mechanism issue or loose components. | Check the tilt tension knob; it might be too loose or too tight. Inspect the tilt mechanism for any obstructions or damage. Ensure all assembly screws are tight. |
Specifications
Detailed specifications for the Lorell Conjure Executive High-Back Mesh Back Black Chair.
| Feature | Detail |
|---|---|
| Brand | Lorell |
| Model Name | Chair (Model 62000) |
| Color | Black |
| Product Dimensions (D x W x H) | 43.7"D x 25.2"W x 24"H |
| Seat Depth | 20.5 inches |
| Maximum Weight Recommendation | 275 Pounds |
| Back Style | Mesh High-Back |
| Special Feature | Adjustable Height, Lumbar Support, Ratchet Back, Seat Slider, Tilt Tension |
| Fill Material | Foam (Seat) |
| Furniture Base Movement | Swivel |
| Recommended Uses | Office |
| Product Care Instructions | Spot Clean |
| Item Weight | 57.4 pounds |
| UPC | 035255620000 |
Figure 6: Side view of the chair with key dimensions indicated, including seat depth and backrest height.
Warranty and Support
For warranty information or product support, please contact the seller, Prime National Distribution, directly. The product is eligible for 30-day easy returns through Amazon. For further assistance, refer to the customer support options available on the Amazon product page.
For general inquiries or to explore other Lorell products, visit the official Lorell store on Amazon: Lorell Store