USASEALING ZUSA-HT-710
USA Sealing ZUSA-HT-710 FDA Silicone Tubing User Manual
Model: ZUSA-HT-710 | Brand: USASEALING
Introduction
The USA Sealing ZUSA-HT-710 FDA Silicone Tubing is a highly flexible and durable product designed for various applications. This tubing meets FDA standards, making it suitable for use with water, food, and beverages. Its common applications include food processing, air and water transfer systems, and use in breweries and distilleries.
Figure 1: USA Sealing ZUSA-HT-710 FDA Silicone Tubing. This image displays a segment of the clear silicone tubing, highlighting its transparent nature and smooth interior and exterior surfaces. The circular opening at the end of the tube is clearly visible, indicating its hollow structure.
Setup and Installation
Prior to installation, inspect the tubing for any visible damage, kinks, or obstructions. Ensure the tubing is clean and free of debris. For applications involving food, beverage, or potable water, it is recommended to thoroughly clean and sanitize the tubing according to industry-specific guidelines before first use. Cut the tubing to the desired length using a sharp, clean cutting tool to ensure a straight, burr-free end. Connect the tubing to appropriate fittings or equipment, ensuring a secure and leak-free connection. Avoid over-tightening or kinking the tubing during installation.
Operating Guidelines
This silicone tubing is designed for transferring various fluids and gases within its specified pressure and temperature limits. It is particularly suited for applications requiring FDA compliance. When in operation, monitor the system for any signs of leaks, blockages, or unusual performance. Ensure the tubing is not subjected to pressures exceeding its maximum rating of 40 PSI. The tubing's flexibility allows for routing around bends; however, avoid sharp bends that could lead to kinking or reduced flow. The recommended bend radius is 1 inch.
- Fluid Compatibility: Suitable for water, food, and beverages. Verify compatibility with other chemicals or solvents before use.
- Temperature Range: Operate within the recommended temperature range for silicone tubing to maintain flexibility and integrity.
- Pressure Limits: Do not exceed 40 PSI (Pound per Square Inch) maximum pressure.
Maintenance and Storage
Regular maintenance ensures the longevity and performance of the silicone tubing. After use, especially in food or beverage applications, clean the tubing thoroughly to prevent buildup and contamination. Silicone tubing can be cleaned with mild detergents and warm water. Rinse thoroughly to remove all cleaning agents. For sterilization, consult relevant industry standards for silicone materials.
When not in use, store the tubing in a clean, dry, and cool environment, away from direct sunlight, ozone, and extreme temperatures. Avoid storing the tubing in a kinked or compressed state, as this can lead to permanent deformation. Keep away from sharp objects or abrasive surfaces that could damage the material.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced Flow / Blockage | Kinked tubing, internal buildup, or foreign object. | Straighten tubing, clean interior, or remove obstruction. |
| Leaks at Connections | Improper fitting, damaged tubing end, or insufficient clamping. | Ensure correct fitting size, re-cut tubing end, or tighten clamp. |
| Tubing Discoloration | Exposure to incompatible chemicals, prolonged UV exposure, or high temperatures. | Verify fluid compatibility, store away from direct sunlight, ensure proper operating temperatures. Replace if integrity is compromised. |
| Loss of Flexibility / Hardening | Exposure to extreme temperatures, chemical degradation, or aging. | Ensure proper operating and storage temperatures. Replace tubing if it has lost its elasticity. |
Product Specifications
| Attribute | Detail |
|---|---|
| Model Number | ZUSA-HT-710 |
| Material | Silicone |
| Color | Clear |
| Inner Diameter (ID) | 1/4" (0.25 inches) |
| Outer Diameter (OD) | 3/8" (0.375 inches) |
| Length | 100 feet (1200 inches) |
| Nominal Wall Thickness | 0.25 inch |
| Maximum Pressure | 40 Pound per Square Inch (PSI) |
| Hardness | Soft (60A - 80A) |
| Bend Radius | 1 inch |
| Curing Method | Platinum Cured |
| FDA Compliant | Yes, for use with water, food, and beverage. |
| ASIN | B07K7THR11 |
| UPC | 193005154059 |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.