SVS PB-3000 13-inch Ported Subwoofer User Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your SVS PB-3000 13-inch Ported Subwoofer. The PB-3000 is designed to deliver powerful and precise low-frequency sound, enhancing your audio experience for both music and home theater applications. Please read these instructions thoroughly before installation and use to ensure optimal performance and product longevity.

Image 1.1: SVS PB-3000 Ported Subwoofer, front view, showcasing its design and the accompanying smartphone control application.

2. Key Features

The SVS PB-3000 subwoofer incorporates advanced technologies for superior audio performance:

• All-new, first-ever 13-inch high-excursion SVS driver for deep and impactful bass.
• Sledge STA-800D2 Amplifier, providing 800 watts RMS (2500+ watts peak) for massive power with precise control.
• First-ever SVS dual-port cabinet design, optimized for maximizing airflow and driver motion while minimizing port turbulence.
• Advanced DSP control via the SVS subwoofer control app for fine-tuning performance.

3. Package Contents

Verify that all items are present in the packaging:

• SVS PB-3000 Subwoofer (with integrated Sledge Amplifier and 13-inch high-excursion SVS driver)
• Power Cord
• Quick Start Guide

4. Setup

4.1 Placement

Subwoofer placement significantly impacts sound quality. Experiment with different locations in your listening room to find the optimal position. Common placements include:

Image 4.1: SVS PB-3000 Ported Subwoofer integrated into a home audio setup, demonstrating typical placement.

• Front of the Room: Near the front speakers, often in a corner or along the front wall. Corner placement can maximize output.
• Mid-Wall: Along a side or rear wall.
• "Subwoofer Crawl" Method: Place the subwoofer in your primary listening position, then crawl around the room to identify where the bass sounds best. This location is often ideal for the subwoofer.

Image 4.2: SVS PB-3000 Ported Subwoofer with its protective metal grille, suitable for various room placements.

4.2 Connections

Ensure all audio components (receiver, amplifier) are powered off before making connections.

1. LFE Connection (Recommended for Home Theater): Connect a single RCA cable from the LFE output of your AV receiver/processor to the LFE input on the PB-3000.
2. Stereo RCA Connection (for 2-Channel Systems): Connect RCA cables from the stereo pre-out of your pre-amplifier/receiver to the left and right line-level inputs on the PB-3000.
3. Trigger Input: For automatic power on/off with compatible equipment, connect a 3-12V AC/DC trigger cable to the Trigger Input.

Image 4.3: Detailed view of the SVS PB-3000's rear panel, highlighting the line-level RCA inputs, LFE input, trigger input, and control buttons.

4.3 Power Connection

After all audio connections are made, connect the supplied power cord to the subwoofer's power inlet and then to a grounded AC outlet. The subwoofer features an "Auto (on/standby)" mode for automatic power management.

5. Operating Instructions

5.1 Initial Power On

Once connected, power on your AV receiver/processor. The subwoofer should power on automatically if in "Auto" mode, or manually if set to "On".

5.2 SVS Subwoofer Control App

The SVS PB-3000 can be controlled wirelessly via the SVS Subwoofer Control App, available for iOS and Android devices. This app provides access to all DSP functions, including:

• Volume Control: Adjust the overall output level.
• Low Pass Filter: Adjust the crossover frequency to blend the subwoofer with your main speakers.
• Phase Control: Adjust the phase to ensure seamless sound integration with other speakers.
• Parametric EQ: Advanced equalization for room correction and sound shaping.
• Room Gain Compensation: Optimizes bass output for your specific room acoustics.
• User Presets: Save and recall custom settings for different listening modes (e.g., Music, Movies).

Download the app from your device's app store and follow the in-app instructions to connect to your PB-3000 via Bluetooth.

5.3 Rear Panel Controls

Basic adjustments can also be made using the buttons on the rear panel:

• Volume (+/-): Adjusts output level.
• Low Pass: Cycles through low pass filter settings.
• Phase: Toggles between 0° and 180° phase.
• Auto (on/standby): Toggles power mode.

6. Maintenance

To ensure the longevity and optimal performance of your SVS PB-3000 subwoofer, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the cabinet. Avoid abrasive cleaners, solvents, or harsh chemicals.
• Dust: Regularly dust the grille and cabinet to prevent accumulation, which can affect performance and aesthetics.
• Placement: Avoid placing the subwoofer in direct sunlight, near heat sources, or in areas with excessive moisture.
• Ventilation: Ensure adequate airflow around the amplifier panel to prevent overheating.

7. Troubleshooting

If you encounter issues with your PB-3000, refer to the following common troubleshooting steps:

• No Sound:
  • Check if the subwoofer is powered on and the power cord is securely connected.
  • Verify that the audio input cables are correctly connected to both the subwoofer and your receiver/processor.
  • Ensure the volume on the subwoofer and your receiver is not set to minimum or muted.
  • Check the low pass filter settings; if set too low, it may not produce audible bass.
• Distorted or Boomy Sound:
  • Adjust the subwoofer's volume level.
  • Experiment with subwoofer placement in the room.
  • Adjust the low pass filter and phase settings using the SVS app or rear panel controls.
  • Check your receiver's bass management settings.
• Subwoofer Not Turning On/Off Automatically:
  • Ensure the subwoofer is set to "Auto" mode.
  • Verify that an audio signal is being sent to the subwoofer.
  • If using the trigger input, ensure the trigger cable is properly connected and the source device is active.
• App Connectivity Issues:
  • Ensure Bluetooth is enabled on your mobile device.
  • Restart the SVS app and try reconnecting.
  • Ensure the subwoofer is powered on.

For further assistance, refer to the SVS website or contact customer support.

8. Specifications

Image 8.1: SVS PB-3000 Ported Subwoofer with its physical dimensions indicated for planning placement.

9. Warranty and Support

The SVS PB-3000 subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official SVS website.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact SVS customer service or your authorized SVS dealer.

• Online Resources: Visit the official SVS website for FAQs, support articles, and firmware updates.
• Customer Service: Contact information can typically be found on the SVS website or in your product's quick start guide.