Manuals+

Sloan ESD-2000

Sloan ESD-2000 Deck-Mounted Foam Soap Dispenser Instruction Manual

Model: ESD-2000 | Brand: Sloan

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Sloan ESD-2000 Deck-Mounted Foam Soap Dispenser. Designed for hygienic hand washing, this infrared sensor-activated dispenser features a polished chrome finish and modular one-piece construction for ease of use and durability.

2. Product Overview

Sloan ESD-2000 Deck-Mounted Foam Soap Dispenser, front view
Figure 1: Sloan ESD-2000 Deck-Mounted Foam Soap Dispenser, front view.

This image displays the main product, the Sloan ESD-2000 Deck-Mounted Foam Soap Dispenser, from a frontal perspective. It highlights the polished chrome finish and the integrated infrared sensor for touch-free operation.

Side view of the Sloan ESD-2000 dispenser
Figure 2: Side view of the Sloan ESD-2000 dispenser.

A side profile of the Sloan ESD-2000 dispenser, showcasing its sleek and compact design, suitable for various restroom aesthetics.

Video 1: Sloan Soap Dispensers Overview.

This video provides an overview of various Sloan soap dispenser models, including the ESD-2000, highlighting key features such as sleek design and touch-free activation for enhanced hygiene.

3. Setup and Installation

The Sloan ESD-2000 dispenser is designed for straightforward installation. Follow these steps for proper setup:

  1. Mounting: The modular one-piece construction allows for direct attachment to the deck surface. Ensure the mounting hole is appropriately sized for the dispenser's base.
  2. Motor Assembly: Connect the motor assembly to the soap dispenser spout. The assembly is designed to rotate 360 degrees, facilitating easy positioning during installation.
  3. Battery Installation: The dispenser operates on four D alkaline batteries. Insert the batteries into the designated battery pack, ensuring correct polarity. The battery pack is typically located for easy access under the counter.
  4. Soap Refill: The unit ships with two 1500ml bottles of non-scented, non-colored foam soap. Install a soap bottle into the dispenser's reservoir. Ensure it is securely seated to prevent leaks.
Underside view of the Sloan ESD-2000 dispenser, illustrating deck-mounted components
Figure 3: Underside view of the Sloan ESD-2000 dispenser.

This image shows the underside of the dispenser, detailing the components involved in deck-mounting and the connection points for the motor assembly and power supply.

4. Operating Instructions

The Sloan ESD-2000 dispenser features touch-free operation for enhanced hygiene.

  • Activation: Place your hands directly under the spout. The infrared sensor will detect your hands and dispense a measured amount of foam soap.
  • Dispensing: Remove your hands once soap is dispensed. The dispenser will automatically reset for the next use.
  • ADA Compliance: This product is designed to comply with Americans with Disabilities Act (ADA) requirements, ensuring accessibility for all users.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your dispenser.

  • Cleaning: Clean the exterior of the dispenser regularly with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the polished chrome finish. Pay attention to the sensor area to ensure it remains clear of obstructions.
  • Battery Replacement: The four D alkaline batteries have an estimated life-span of 45,000 activations. When the dispenser stops dispensing or shows signs of reduced performance, replace all four batteries simultaneously. Access the battery pack, remove old batteries, and insert new ones, observing correct polarity.
  • Soap Refill: Each 1500ml soap bottle provides approximately 1,500 dispenses. When the soap level is low, replace the bottle with a new Sloan-approved foam soap refill. Do not mix different types of soap.
Close-up front view of the Sloan ESD-2000 dispenser
Figure 4: Close-up front view of the Sloan ESD-2000 dispenser.

This close-up view highlights the sensor and soap outlet, critical areas for regular cleaning and ensuring proper function.

6. Troubleshooting

If you encounter issues with your dispenser, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No soap dispensed
  • Low or dead batteries
  • Empty soap reservoir
  • Sensor obstructed or dirty
  • Replace all four D alkaline batteries
  • Refill or replace soap bottle
  • Clean the sensor window
Continuous dispensing
  • Sensor obstructed
  • Malfunctioning sensor
  • Remove any objects near the sensor
  • Clean the sensor window
  • Contact Sloan support if problem persists
Weak or inconsistent foam
  • Low soap level
  • Incorrect soap type (non-foam)
  • Refill or replace soap bottle
  • Ensure only Sloan-approved foam soap is used

7. Specifications

  • Model: ESD-2000
  • Part Number: 3346089
  • Color: Chrome
  • Material: Brass
  • Product Dimensions: 5"L x 5"W x 5"H
  • Shape: Square
  • Liquid Volume: 1500 Milliliters (per soap bottle)
  • Item Weight: 5 pounds
  • Installation Method: Deck Mounted
  • Spout Reach: 5.6 Inches
  • Mounting Type: Deck
  • Power Source: 4 D alkaline batteries (included)
  • Battery Life: Approximately 45,000 activations per set of batteries

8. Warranty and Support

Sloan products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or visit the official Sloan website.

For additional assistance, please contact Sloan customer service directly.

Related Documents - ESD-2000

Preview Sloan ESD-2000-CP Deck-Mounted Foam Soap Dispenser
Detailed information on the Sloan ESD-2000-CP, a sensor-activated, deck-mounted, battery-powered foam soap dispenser with polished chrome finish. Includes product features, specifications, installation notes, and compatible faucets.
Preview Sloan Sensor Activated Electronic Soap Dispenser Installation Guide
Comprehensive installation instructions for Sloan's ESD-200, ESD-250, ESD-300, and ESD-350 sensor-activated electronic soap dispensers, covering mounting, operation, and troubleshooting.
Preview Sloan ESD-2000-SF Deck-Mounted Foam Soap Dispenser - Product Information
Detailed product information for the Sloan ESD-2000-SF, a sensor-activated, deck-mounted foam soap dispenser with brushed stainless finish. Includes specifications, features, compliances, and compatible faucets.
Preview Sloan ESD-2000-BN Deck-Mounted Foam Soap Dispenser - Specifications and Features
Detailed information on the Sloan ESD-2000-BN, a sensor-activated, deck-mounted foam soap dispenser with brushed nickel finish. Includes specifications, features, compatible faucets, and download links.
Preview Sloan ESD-500-PB Deck-Mounted Foam Soap Dispenser - Specifications and Features
Detailed information on the Sloan ESD-500-PB, a polished brass, deck-mounted, sensor-activated foam soap dispenser. Includes product specifications, features, compliances, and matching faucets.
Preview Sloan ESD-2100-CP Deck-Mounted Foam Soap Dispenser - Product Data Sheet
Detailed product information for the Sloan ESD-2100-CP deck-mounted foam soap dispenser, including features, specifications, installation notes, and compatible faucets. This document provides technical data for commercial and institutional use.