Introduction
This manual provides essential information for the safe and efficient operation of your Baxi Victoria Condens 24/24F boiler. Please read it thoroughly before installation, operation, or maintenance. This boiler is designed to provide comfortable heating and hot water with high energy efficiency, featuring intuitive controls via an LCD screen or compatible mobile application.
Figure 1: Front view of the Baxi Victoria Condens 24/24F boiler. This image shows the compact, white casing of the boiler, with the Baxi logo prominently displayed. Below the logo, an integrated LCD screen and control buttons are visible, indicating the user interface for operation.
Setup and Installation
Installation of the Baxi Victoria Condens 24/24F boiler must be performed by a qualified and certified professional in accordance with all local and national regulations. Incorrect installation can lead to serious injury, property damage, or void the product warranty.
Pre-Installation Checks:
- Ensure the installation site meets all ventilation and clearance requirements.
- Verify that the gas supply, water supply, and electrical connections are appropriate for the boiler's specifications.
- Inspect the boiler for any shipping damage before installation.
Mounting:
The boiler should be securely mounted on a suitable wall using the provided mounting bracket and fixings. Ensure the wall can support the boiler's weight (approximately 27.0 kg).
Connections:
- Connect the gas supply line, ensuring all connections are leak-free.
- Connect the heating flow and return pipes, and the domestic hot water inlet and outlet pipes.
- Connect the condensate drain to an appropriate waste system.
- Perform electrical connections according to the wiring diagram in the full technical manual.
Operating Instructions
The Baxi Victoria Condens 24/24F boiler is designed for user-friendly operation. Controls are accessible via the integrated LCD screen and buttons, or remotely via a compatible mobile application.
Initial Start-up:
- Ensure all gas, water, and electrical connections are secure and open.
- Vent the heating system to remove any air.
- Switch on the electrical supply to the boiler.
- Follow the on-screen prompts on the LCD display for initial configuration.
Adjusting Temperature:
- Use the '+' and '-' buttons on the control panel to adjust the desired heating and domestic hot water temperatures.
- The current settings will be displayed on the LCD screen.
Mobile Control:
For remote control, download the official Baxi mobile application (if available for this model) and follow the in-app instructions to pair it with your boiler. This allows for convenient temperature adjustments and scheduling from your smartphone.
Maintenance
Regular maintenance is crucial for the longevity and efficient operation of your Baxi boiler. It is recommended to have the boiler serviced annually by a qualified technician.
User Maintenance:
- Pressure Check: Periodically check the system pressure gauge. It should typically be between 1.0 and 1.5 bar when the system is cold. If the pressure is too low, repressurize the system according to the instructions in the full technical manual.
- Cleaning: Keep the exterior of the boiler clean using a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the air vents are clear of obstructions.
- Condensate Drain: Ensure the condensate drain pipe is not blocked or frozen, especially during cold weather.
Professional Servicing:
An annual service by a Gas Safe registered engineer (or equivalent in your region) is mandatory to ensure safe and efficient operation, and to maintain your warranty. The service typically includes:
- Checking and cleaning the main burner and heat exchanger.
- Inspecting all safety devices.
- Checking gas and water connections for leaks.
- Testing the flue system.
- Verifying correct operating pressures and temperatures.
Troubleshooting
This section provides guidance on common issues you might encounter with your Baxi Victoria Condens 24/24F boiler. For complex problems or if you are unsure, always contact a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| No heating or hot water | No power supply; low system pressure; thermostat setting too low; gas supply off. | Check power, repressurize system, adjust thermostat, ensure gas valve is open. |
| Boiler making unusual noises (e.g., gurgling) | Air in the system; low system pressure. | Bleed radiators, check and repressurize system. |
| Error code on display | Specific fault detected by the boiler's internal diagnostics. | Refer to the full technical manual for error code definitions. Attempt a boiler reset. If persistent, contact a qualified technician. |
| Leakage from boiler | Loose connection; faulty component. | Immediately turn off the boiler and water supply. Contact a qualified technician. |
Specifications
Key technical specifications for the Baxi Victoria Condens 24/24F boiler:
- Brand: Baxi
- Model Number: 7657139
- Product Dimensions: 28 x 40 x 70 cm (Depth x Width x Height)
- Weight: 27 kg
- Color: White
- Components Included: Boiler unit
- First Available Date: January 15, 2020
Warranty and Support
For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Baxi customer support directly. Warranty coverage typically requires professional installation and annual servicing by a qualified technician.
For technical support, spare parts, or to arrange a service visit, please contact your installer or the official Baxi service center in your region. Contact details can usually be found on the Baxi website or in your product documentation.
