1. Introduction
This instruction manual provides guidance for the installation, usage, and maintenance of the HOBOT LEGEE-668/669/688 Consumables Pack. This pack contains essential replacement parts designed to maintain the optimal performance of your HOBOT LEGEE robot vacuum cleaner. Regular replacement of these consumables ensures efficient cleaning and extends the lifespan of your device.
2. Package Contents
The HOBOT LEGEE-668/669/688 Consumables Pack includes the following items:
- Cleaning Cloths: 2 sets (total of 4 cloths)
- Side Brushes: 2 pieces
- High-Efficiency Filters: 2 pieces
- Spray Nozzles: 4 pieces
- Screen Filter: 1 piece
3. Installation Guide
Before installing any replacement parts, ensure your HOBOT LEGEE robot vacuum is powered off and disconnected from its charging base.
3.1. Cleaning Cloth Installation
This image displays four blue microfiber cleaning cloths, designed for attachment to the HOBOT LEGEE robot vacuum for effective floor cleaning.
- Locate the cleaning cloth attachment area on the underside of the robot.
- Remove the used cleaning cloths by detaching them from the hook-and-loop fasteners or clips.
- Align the new cleaning cloths with the attachment area and firmly press them onto the hook-and-loop fasteners or secure them with the clips. Ensure they are flat and securely attached.
3.2. Side Brush Installation
Shown here are two side brushes, featuring blue bases and black bristles, which are crucial for sweeping debris into the robot vacuum's path.
- Turn the robot vacuum upside down to access the side brush compartments.
- Gently pull the old side brush upwards to remove it from its post.
- Align the new side brush with the hexagonal post and push it down firmly until it clicks into place. Ensure the brush rotates freely.
3.3. High-Efficiency Filter Installation
This image shows two white high-efficiency filters, essential for trapping fine dust and allergens within the HOBOT LEGEE robot vacuum's dustbin.
- Open the dustbin cover on your HOBOT LEGEE robot.
- Remove the dustbin from the robot.
- Locate the filter compartment within the dustbin. Remove the old high-efficiency filter.
- Insert the new high-efficiency filter into the compartment, ensuring it fits snugly.
- Close the dustbin cover and reinsert the dustbin into the robot.
3.4. Spray Nozzle and Screen Filter Installation
The spray nozzles and screen filter are located within the water tank system. Refer to your main HOBOT LEGEE user manual for specific instructions on accessing and replacing these components. Generally, this involves:
- Removing the water tank from the robot.
- Carefully detaching the old spray nozzles and screen filter.
- Installing the new spray nozzles and screen filter, ensuring a secure fit to prevent leaks.
- Reinstalling the water tank into the robot.
4. Usage and Replacement Schedule
To maintain optimal cleaning performance, adhere to the following general replacement guidelines. Actual replacement frequency may vary based on usage and environment.
- Cleaning Cloths: Replace every 1-3 months, or when visibly worn or cleaning performance diminishes.
- Side Brushes: Replace every 3-6 months, or when bristles are bent, damaged, or cleaning effectiveness is reduced.
- High-Efficiency Filters: Replace every 3-6 months, or when suction power decreases or the filter appears clogged.
- Spray Nozzles and Screen Filter: Replace as needed, typically when water spray is inconsistent or blocked.
5. Care and Maintenance
- Cleaning Cloths: After each use, remove and wash the cleaning cloths. They can be hand-washed or machine-washed with mild detergent. Air dry completely before reattaching.
- Side Brushes: Periodically check side brushes for tangled hair or debris. Use scissors to carefully cut away any tangled material.
- High-Efficiency Filters: Tap the filter gently over a trash can to remove loose dust. Do not wash the high-efficiency filter with water, as this can damage the filter material.
- Spray Nozzles: If spray is inconsistent, gently clean the nozzle openings with a small brush or pin to remove any mineral deposits or blockages.
6. Troubleshooting
If you experience issues after replacing consumables, consider the following:
- Poor Cleaning Performance: Ensure cleaning cloths are clean and properly attached. Check side brushes for tangles or damage. Verify the high-efficiency filter is not clogged.
- Reduced Suction: A clogged high-efficiency filter is a common cause. Replace the filter if tapping out dust does not restore suction.
- No Water Spray: Check if the water tank is filled. Ensure spray nozzles are clear of blockages and the screen filter is clean.
- Unusual Noises: Inspect side brushes for foreign objects or improper installation.
If problems persist, refer to your main HOBOT LEGEE robot vacuum user manual or contact customer support.
7. Product Specifications
| Specification | Detail |
|---|---|
| Item Weight | 6.3 ounces |
| Package Dimensions | 13.35 x 4.76 x 1.81 inches |
| Color | Blue (for cloths and brush bases) |
| Batteries Included? | No |
| Batteries Required? | No |
8. Warranty Information
This consumables pack is designed as replacement parts. For warranty information regarding the HOBOT LEGEE robot vacuum cleaner itself, please refer to the original product's user manual or the manufacturer's official website. Consumable items typically have a limited or no warranty due to their nature.
9. Customer Support
For further assistance, technical support, or inquiries regarding your HOBOT LEGEE robot vacuum and its accessories, please visit the official HOBOT website or contact their customer service department. Contact details can typically be found in your main robot vacuum manual or on the HOBOT brand's online presence.
