1. Introduction
Thank you for choosing the Vieta Pro Hubbie Portable Wireless Bluetooth Speaker. This compact and powerful speaker is designed for portability and features Bluetooth connectivity, FM radio, USB playback, and IPX4 water resistance. Please read this manual carefully to ensure proper use and to maximize your experience with the device.
Image 1.1: Front view of the Vieta Pro Hubbie Portable Wireless Bluetooth Speaker in red. The speaker features a compact, cube-like design with a front-facing speaker grille and a carrying strap attached.
Key Features:
- Bluetooth Connectivity: Seamless wireless audio streaming.
- Portable Design: Compact and lightweight with a convenient carrying strap.
- IPX4 Water Resistance: Protected against splashing water from any direction.
- FM Radio: Listen to your favorite radio stations directly from the speaker.
- USB Playback: Play music directly from a USB flash drive.
- Voice Call Function: Answer calls directly through the speaker.
- Battery Life: Up to 4 hours of playback on a single charge.
2. Setup
2.1 Package Contents
Ensure all items are present in the package:
- Vieta Pro Hubbie Speaker
- USB Charging Cable
- Instruction Manual
Image 2.1: The Vieta Pro Hubbie speaker shown in its transparent retail packaging, highlighting its compact size and included features.
2.2 Charging the Speaker
- Locate the DC 5V charging port on the side of the speaker.
- Connect the provided USB charging cable to the speaker's DC 5V port.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Charging takes approximately 1.5 hours.
- Once fully charged, the indicator light will change or turn off (refer to specific light behavior in the LED indicator section if available, otherwise assume standard behavior).
Note: For optimal battery life, fully charge the speaker before first use.
Image 2.2: Side view of the Vieta Pro Hubbie speaker, clearly showing the DC 5V charging port and the USB music playback port.
2.3 Powering On/Off
- To Power On: Press and hold the Power button (⑁) for a few seconds until you hear an audible prompt or see the LED indicator light up.
- To Power Off: Press and hold the Power button (⑁) again for a few seconds until you hear an audible prompt or the LED indicator turns off.
Image 2.3: Side view of the Vieta Pro Hubbie speaker, highlighting the power button and LED indicator.
2.4 Bluetooth Pairing
After powering on, the speaker will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
- Ensure the speaker is powered on and in pairing mode.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices.
- Select "Vieta Pro Hubbie" from the list of devices.
- Once paired, the speaker will emit an audible confirmation, and the LED indicator will stop flashing and remain solid.
- The speaker will automatically reconnect to the last paired device when powered on, if the device is within range and Bluetooth is enabled.
3. Operating Instructions
3.1 Basic Controls
The speaker features intuitive controls located on the top surface.
Image 3.1: Top view of the Vieta Pro Hubbie speaker, displaying the control buttons for volume, play/pause, and track navigation.
| Button | Function (Short Press) | Function (Long Press) |
|---|---|---|
| - | Volume Down | Previous Track / FM Scan Down |
| ⏸ / ⏵ | Play / Pause / Answer Call / End Call | Mode Switch (Bluetooth / FM / USB) |
| + | Volume Up | Next Track / FM Scan Up |
3.2 Bluetooth Music Playback
Once paired with your device, you can control music playback directly from your device or using the speaker's control buttons.
- Press the ⏸ / ⏵ button to play or pause music.
- Press the - button to decrease volume.
- Press the + button to increase volume.
- Long press the - button for the previous track.
- Long press the + button for the next track.
3.3 USB Music Playback
The speaker supports playing audio files directly from a USB flash drive.
- Insert a USB flash drive containing MP3 or other compatible audio files into the USB port on the side of the speaker.
- The speaker will automatically switch to USB mode or you may need to long press the ⏸ / ⏵ button to cycle through modes until USB mode is activated.
- Use the ⏸ / ⏵, -, and + buttons to control playback as described in the Bluetooth Music Playback section.
3.4 FM Radio Operation
Enjoy your favorite radio stations with the built-in FM tuner.
- Long press the ⏸ / ⏵ button to switch to FM Radio mode.
- To auto-scan and save available stations, short press the ⏸ / ⏵ button. The speaker will scan and store stations.
- Once scanning is complete, long press the - or + buttons to navigate between saved stations.
- Short press the - or + buttons to adjust the volume.
3.5 Voice Call Function
When connected via Bluetooth to your smartphone, you can use the speaker for hands-free calls.
- Answering a Call: When an incoming call rings, short press the ⏸ / ⏵ button to answer.
- Ending a Call: During a call, short press the ⏸ / ⏵ button to end the call.
- Rejecting a Call: When an incoming call rings, long press the ⏸ / ⏵ button to reject the call.
4. Maintenance
4.1 Water Resistance (IPX4)
The Vieta Pro Hubbie speaker is IPX4 water-resistant, meaning it is protected against splashing water from any direction. This makes it suitable for outdoor use or near water, but it is not designed to be submerged in water.
- Ensure the charging port and USB port covers are securely closed before exposing the speaker to water splashes.
- Do not submerge the speaker in water.
- If the speaker gets wet, wipe it dry with a soft cloth before charging or opening the port covers.
4.2 Cleaning
- Wipe the speaker with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface.
4.3 Battery Care
- Avoid exposing the speaker to extreme temperatures (hot or cold), as this can affect battery life.
- If the speaker will not be used for an extended period, charge it to approximately 50% before storing and recharge every few months to prevent deep discharge.
5. Troubleshooting
If you encounter any issues with your Vieta Pro Hubbie speaker, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker for at least 1.5 hours. |
| Cannot pair via Bluetooth. | Bluetooth is off on your device; speaker is not in pairing mode; too far from device. | Ensure Bluetooth is enabled on your device. Power off and on the speaker to re-enter pairing mode. Move speaker closer to your device (within 10 meters). |
| No sound during playback. | Volume too low; speaker not connected; incorrect mode. | Increase volume on both speaker and connected device. Ensure speaker is successfully paired. Check if the speaker is in the correct mode (Bluetooth, USB, FM). |
| FM radio reception is poor. | Weak signal; environmental interference. | Try moving the speaker to a different location. Perform an auto-scan again. |
| USB playback not working. | USB drive not inserted correctly; unsupported file format; speaker not in USB mode. | Ensure USB drive is fully inserted. Check if audio files are in a compatible format (e.g., MP3). Long press the mode button to switch to USB mode. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Vieta Pro |
| Model Number | VM-BS19RD |
| Color | Red |
| Speaker Type | Subwoofer (as per product data, though typically a full-range portable speaker) |
| Connectivity | Bluetooth |
| Special Features | Bluetooth, FM Radio, USB Playback, Voice Call Function, IPX4 Water Resistance |
| Compatible Devices | iPhone, iPod, iPad, Smartphones, Tablets, MP4 Players, and other Bluetooth-enabled devices |
| Product Dimensions (L x W x H) | 68 x 65 x 70 mm (6.8 x 6.5 x 7.0 cm) |
| Weight | 220 grams |
| Battery Life | Up to 4 hours |
| Charging Time | Approximately 1.5 hours |
| Water Resistance Rating | IPX4 |
Image 6.1: Diagram showing the dimensions of the Vieta Pro Hubbie speaker: 70mm height, 65mm width, and 68mm depth.
7. Warranty and Support
Specific warranty details and customer support contact information are not provided within this manual. For warranty claims, technical support, or further assistance, please refer to the official Vieta Pro website or contact your retailer.