EARISE M60 Portable PA System User Manual

1. Safety Information

Consumer Alert: Most users do not need a license to operate this wireless microphone system. However, operating this microphone system without a license is subject to certain restrictions:

• The system may not cause harmful interference.
• It must operate at a low power level (not exceeding 50 milliwatts).
• It has no protection from interference received from any other device.

Purchasers should be aware that the FCC is currently evaluating the use of wireless microphone systems, and these rules are subject to change. For more information, contact the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at fcc.gov/cgb/wirelessmicrophones.

2. Product Overview

The EARISE M60 is a portable Bluetooth loudspeaker and PA system designed for various audio applications. It integrates a 60W amplifier speaker with a wireless microphone system, offering versatile connectivity options and portability.

2.1 Included Items

• EARISE M60 Portable PA System
• Wireless Microphone (x2)
• Remote Control (x1)
• Power Adapter

Figure 2.1: EARISE M60 PA System showing its dimensions and the included wireless microphones and remote control.

3. Controls and Ports

The control panel provides access to all functions and settings of the EARISE M60 PA system. Refer to the image below for a visual guide to the controls.

Figure 3.1: Detailed view of the EARISE M60 control panel.

1. Mic 1 / Mic 2 Input: Connect wired microphones (if applicable) or use for other audio input.
2. Display: LED screen showing current mode, track number, or frequency.
3. USB Port: Insert USB drives for audio playback.
4. AUX Input: Connect external audio devices via a 3.5mm audio cable.
5. Digital Keypad: For direct track selection or FM frequency input.
6. Speaker Volume Control Dial: Adjusts the main output volume of the speaker.
7. Mode Button: Switches between input modes (Bluetooth, AUX, USB, TF Card, FM).
8. Mic VIP: Microphone priority function.
9. Repeat Button: Repeats current track or playlist.
10. Previous Song: Skips to the previous track or FM station.
11. Play / Stop: Plays or pauses audio playback.
12. Next Song: Skips to the next track or FM station.

Additional controls include Mic ECHO, Mic Vol, BASS, and Treble knobs for sound customization.

4. Setup

4.1 Charging the Battery

For the first use, charge the PA system for more than 12 hours. It is recommended to charge the speaker after each use to maintain battery health. The system can play for approximately 3 hours at maximum volume or up to 10 hours in standby mode on a full charge.

Figure 4.1: Battery life and recommended charging time for the EARISE M60.

4.2 Powering On/Off

Locate the power switch, typically on the rear or side panel of the unit. Flip the switch to the 'ON' position to power on the system. The LED display will illuminate. To power off, flip the switch to the 'OFF' position.

4.3 Connecting Microphones

The EARISE M60 comes with two wireless microphones. Ensure the microphones have fresh batteries and are powered on. The system should automatically connect to the wireless microphones. For wired microphones, insert the microphone cable into the 'Mic 1' or 'Mic 2' input jacks on the control panel.

5. Operating Instructions

5.1 Bluetooth Connection

To connect a Bluetooth device:

1. Press the Mode button until 'Bluetooth' mode is selected on the display. The system will enter pairing mode.
2. Enable Bluetooth on your mobile phone, tablet, or other device.
3. Search for 'EARISE M60' in the list of available devices and select it to pair.
4. Once connected, you can stream audio from your device to the PA system.

To disconnect Bluetooth, press and hold the Play/Pause button. You will hear a prompt voice "Bluetooth Cancel".

Figure 5.1: Connecting a smartphone to the EARISE M60 via Bluetooth.

5.2 NFC Pairing

For NFC-enabled smartphones, pairing can be done with a single tap:

1. Ensure NFC is enabled on your smartphone.
2. Tap your NFC-enabled smartphone near the NFC tag on the EARISE M60.
3. Confirm the pairing on your smartphone if prompted.

Figure 5.2: Easy NFC pairing with a compatible smartphone.

5.3 AUX Input

Connect external audio sources (e.g., MP3 players, laptops) using a 3.5mm audio cable to the AUX Input port. Press the Mode button to select 'AUX' mode.

5.4 USB/TF Card Playback

Insert a USB drive into the USB Port or a TF card into the designated slot. The system will automatically switch to USB/TF card mode and begin playing compatible audio files. Use the Previous Song, Play/Stop, and Next Song buttons for control.

5.5 FM Radio

Press the Mode button to select 'FM Radio' mode. Use the Previous Song and Next Song buttons to scan for stations. For optimal reception, ensure the antenna is extended.

Figure 5.3: EARISE M60 with FM radio signal icon.

5.6 Microphone Usage and Sound Adjustment

Adjust the microphone volume using the Mic Vol knob. Use the Mic ECHO knob to add an echo effect to the microphone output. The BASS and Treble knobs allow for overall sound equalization.

5.7 Remote Control Operation

The included remote control provides convenient access to various functions from a distance, including mode selection, volume control, track navigation, and microphone settings.

Figure 5.4: Remote control for the EARISE M60.

6. Maintenance

6.1 Battery Care

To prolong battery life, it is recommended to fully charge the PA system after each use. Avoid completely draining the battery frequently.

6.2 Cleaning

Wipe the exterior of the PA system with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the ports free of dust and debris.

7. Troubleshooting

7.1 Microphone Noise

If you experience noise when using the microphone, ensure the microphone is not too close to the speaker. This can cause feedback, which is a normal occurrence. Maintain a reasonable distance between the microphone and the speaker. If the microphone is defective, contact customer support for a replacement.

7.2 Low Volume Output

If the volume is low, check both the volume setting on your connected device (e.g., phone) and the Speaker Volume Control Dial on the PA system. Adjust both to the desired level. Note that if the speaker's battery is low, the volume may automatically decrease.

7.3 Bluetooth Disconnection

If Bluetooth disconnects unexpectedly, try re-pairing your device. Ensure your device is within the effective range of the PA system. To manually disconnect Bluetooth, press and hold the Play/Pause button on the control panel.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official EARISE website. Keep your purchase receipt for warranty claims.