CONTEC CONTEC08A Automatic Blood Pressure Monitor User Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation of your CONTEC CONTEC08A Automatic Blood Pressure Monitor. Please read this manual thoroughly before first use and retain it for future reference. This device is designed for household use to measure blood pressure and pulse rate.

2. Product Overview

2.1 Key Features

• High-definition color LCD display for clear readings.
• Fully automatic blood pressure measurement.
• Multi-user storage: Automatically stores results for three users, up to 100 items per user.
• Data review interface: Displays data in list, trend graph, and large font formats.
• PC software support: Connects via USB for data viewing, analysis, and report printing.

2.2 Components

The standard package includes:

• CONTEC08A Main Unit
• Adult Cuff (22-32cm arm circumference)
• USB Cable
• User Manual

Note: A charger is not included in the package. The device operates on batteries or an external AC adapter (not included).

Figure 2.2.1: Package contents of the CONTEC08A Blood Pressure Monitor.

Figure 2.2.2: Key display elements and buttons on the CONTEC08A monitor.

3. Safety Information

This device is intended for non-invasive measurement of arterial blood pressure and pulse rate in adults. It is not intended for use in neonatal or infant patients unless specific cuffs are used and the device supports those modes. Always consult your physician for interpretation of blood pressure readings. Do not use this device for self-diagnosis or self-treatment.

3.1 General Precautions

• Do not apply the cuff over a wound or inflamed area.
• Avoid taking measurements immediately after drinking coffee or alcohol, taking a bath, or engaging in physical exercise. Wait at least 30 minutes.
• Ensure the cuff size is appropriate for your arm circumference.
• Keep the device away from strong electromagnetic fields.

Figure 3.1.1: FDA clearance documentation for the CONTEC Electronic Sphygmomanometer.

4. Setup

4.1 Battery Installation

1. Open the battery compartment cover on the back of the device.
2. Insert four AA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

4.2 Cuff Connection

1. Locate the air tube connector on the side of the monitor.
2. Firmly insert the air tube from the cuff into the connector port.

5. Operation

5.1 Preparing for Measurement

• Sit upright in a chair with your feet flat on the ground.
• Ensure your arm is resting comfortably on a flat surface, with your palm facing upwards.
• Relax and avoid talking or moving during the measurement.

5.2 Applying the Cuff

1. Slide the cuff onto your upper arm, ensuring the air tube is positioned on the inside of your arm, aligned with your brachial artery.
2. The bottom edge of the cuff should be approximately 1 inch (2 fingers) above your elbow.
3. Wrap the cuff snugly around your arm, but not too tightly.

Figure 5.2.1: Correct cuff placement on the upper arm.

5.3 Taking a Measurement

1. Press the ON/OFF button to turn on the device.
2. Press the START/STOP button to begin the measurement. The cuff will inflate automatically.
3. Remain still and quiet until the measurement is complete and the results are displayed.
4. The device will display your Systolic Pressure (SYS), Diastolic Pressure (DIA), and Pulse Rate (PR).

Figure 5.3.1: Example of measurement results on the CONTEC08A display.

6. Data Management

6.1 User Storage

The CONTEC08A automatically stores measurement results for up to three different users, with each user having a capacity of 100 readings. This allows for easy tracking of individual blood pressure trends over time.

6.2 PC Software

The device supports connection to a PC via the included USB cable. Dedicated PC software (available for download) allows you to:

• View stored data in detail.
• Analyze results through trend graphs and other visual representations.
• Generate and print comprehensive reports.

Figure 6.2.1: Multi-user data storage and review interface.

7. Maintenance and Care

7.1 Cleaning

• Clean the device and cuff with a soft, dry cloth.
• Do not use abrasive cleaners or immerse the device in water.

7.2 Storage

• Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• If the device will not be used for an extended period, remove the batteries to prevent leakage.

8. Troubleshooting

If you encounter issues with your CONTEC08A monitor, please refer to the following common solutions:

9. Specifications

10. Warranty and Support

For any questions or support regarding your CONTEC08A Blood Pressure Monitor, please contact the seller directly through the platform where the purchase was made. Specific warranty details are not provided in the product information. Please refer to your purchase documentation or contact the seller for warranty information.