1. Setup
1.1 Unpacking
Carefully remove all components from the packaging. Retain packaging materials for future storage or transport. Ensure all parts are present before use.
1.2 Components
- Electric Kettle with Glass Carafe
- Detachable Power Base
- Instruction Manual
Image: The kettle's compact design, cool-touch handle, and LED indicator light are visible, along with approximate dimensions (9.4 in H x 6.2 in W x 8.7 in L).
1.3 Placement
Place the power base on a dry, flat, stable, and heat-resistant surface. Ensure the kettle is positioned away from the edge of the counter to prevent accidental tipping. Keep the kettle and power base away from water sources and heat-emitting appliances.
Image: The detachable power base with its integrated cord wrap system is shown, alongside icons representing boil dry protection, BPA-free materials, and auto shut-off features.
1.4 Initial Cleaning
Before first use, fill the kettle with clean water to the MAX line. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues. Wipe the exterior with a damp cloth.
2. Operating Instructions
2.1 Filling the Kettle
- Remove the kettle from its power base.
- Press the lid release button to open the lid.
- Fill the glass carafe with the desired amount of fresh, cold water. Do not fill below the MIN (0.5L) mark or above the MAX (1.7L) mark.
- Close the lid securely until it clicks.
Image: The kettle is shown with its lid fully open, illustrating the wide mouth for convenient water filling and cleaning.
2.2 Powering On and Boiling
- Place the filled kettle securely onto the power base.
- Plug the power base into a standard electrical outlet.
- Flip the ON/OFF switch located at the bottom of the handle to the 'ON' position. The blue LED indicator light will illuminate, indicating that the kettle is heating.
- The water will begin to boil. The 1500W heating element ensures rapid boiling.
Image: A clear view of the Amazon Basics Electric Kettle, showcasing the transparent glass carafe with visible water level indicators (MIN 0.5L to MAX 1.7L).
Image: The electric kettle is shown with water boiling inside, accompanied by a distinctive blue LED illumination around the base.
2.3 Automatic Shut-Off
Once the water reaches a rolling boil, the kettle will automatically shut off, and the blue LED indicator light will extinguish. This feature, along with boil-dry protection, ensures safe operation.
2.4 Pouring
Carefully lift the kettle from its power base by the cool-touch handle and pour the hot water. Exercise caution as the kettle body and steam can be hot.
3. Care and Maintenance
3.1 Cleaning the Exterior
Unplug the kettle and allow it to cool completely. Wipe the exterior of the kettle and power base with a soft, damp cloth. Do not use abrasive cleaners or immerse the power base in water.
3.2 Descaling
Mineral deposits (limescale) can build up inside the kettle over time, especially in hard water areas. This can affect performance and taste. Descale regularly (monthly or as needed) using a commercial descaling solution or a mixture of white vinegar and water (1 part vinegar to 2 parts water). Fill the kettle with the solution, bring to a boil, let it sit for 15-30 minutes, then discard. Rinse thoroughly several times with fresh water.
3.3 Filter Cleaning
The kettle includes a removable filter in the spout to prevent limescale from entering your cup. To clean, remove the filter and rinse it under running water. Use a soft brush if necessary to remove stubborn deposits. Reinsert the filter securely.
Image: A detailed close-up of the kettle's spout, clearly showing the fine mesh filter designed to be removable for cleaning.
3.4 Storage
Ensure the kettle is clean and dry before storing. The power cord can be wrapped around the base for neat storage. Store in a cool, dry place.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not turn on. | No power, kettle not properly seated on base, or limescale buildup. | Check power outlet. Ensure kettle is correctly placed on the power base. Descale the kettle if limescale is present. |
| Water not boiling or boiling slowly. | Limescale buildup, insufficient water, or faulty heating element. | Descale the kettle. Ensure water level is between MIN and MAX. If problem persists, contact customer support. |
| Kettle shuts off before boiling. | Limescale buildup affecting sensor. | Descale the kettle thoroughly. |
| Unusual taste or odor in water. | New product residue or limescale buildup. | Perform initial cleaning steps again. Descale the kettle. |
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | F-625C |
| Capacity | 1.8 Quarts (1.7 Liters) |
| Power | 1500W |
| Material | Glass, Stainless Steel |
| Special Features | Automatic Shut-Off, Boil-Dry Protection, BPA-Free, LED Illumination, Strix Thermostat |
| Product Dimensions | 8.74"L x 6.22"W x 9.41"H |
| Item Weight | 2.49 pounds (1.13 Kilograms) |
| UPC | 655772018359 |
6. Warranty and Support
6.1 Warranty Information
This Amazon Basics product is covered by a limited warranty. Please refer to the warranty card included with your purchase or visit the official Amazon Basics website for detailed warranty terms and conditions.
6.2 Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact Amazon Basics customer support. Contact information can typically be found on the Amazon Basics website or through your purchase platform.
