YING RAY 2018102806
Contents
Instruction Manual for YING RAY Replacement Air Conditioner Remote Control
Brand: YING RAY | Model: 2018102806
1. Product Overview
This manual provides instructions for the YING RAY replacement remote control, designed for various Soleus Air, Danby, and ARCTICAIRE air conditioner models. This remote functions as a direct replacement, requiring no programming for immediate use after battery installation.

Image 1.1: Front view of the YING RAY replacement remote control. It features a grey body with a digital display at the top and various function buttons below, including power, mode, fan, and temperature controls.
2. Setup and Battery Installation
The remote control operates on two "AAA" 1.5V ordinary batteries (not included). Follow these steps for proper battery installation:
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
Battery Compatibility Tip:
In some regions (e.g., USA & Canada), "AAA" batteries may have slight variations in positive pole length ("Type A" and "Type B"). If the remote does not power on after installing "Type B" batteries, the positive pole spring inside the remote's battery compartment may need slight adjustment to ensure proper contact.

Image 2.1: Illustration showing two types of AAA batteries ("A" and "B") and a three-panel sequence demonstrating how to gently pull out the positive pole spring in the battery compartment if using "Type B" batteries to ensure proper electrical contact.
3. Operating Instructions
The remote control is designed for intuitive operation. Point the remote directly at the air conditioner's receiver when pressing buttons.

Image 3.1: Close-up of the remote control, highlighting the digital display showing temperature and time, and the "C/F" button for unit conversion.
Button Functions:
- I/O (Power): Turns the air conditioner ON or OFF.
- MODE: Cycles through operating modes such as Cool, Heat, Fan, Dry, Auto (modes may vary by AC unit).
- FAN: Adjusts fan speed (e.g., Low, Medium, High, Auto).
- SWING: Activates or deactivates the automatic louver swing function.
- SLEEP: Engages sleep mode for quiet operation and energy saving.
- +/- (Temperature Adjustment): Increases or decreases the set temperature.
- C/F: Toggles the temperature display between Celsius and Fahrenheit.
- T-ON (Timer On): Sets a timer for the air conditioner to turn ON automatically.
- T-OFF (Timer Off): Sets a timer for the air conditioner to turn OFF automatically.
- HOUR: Adjusts the hour setting for the timer or clock.
- MIN: Adjusts the minute setting for the timer or clock.
- RESET: Resets the remote control settings.
For detailed operation of specific modes or advanced features, refer to your air conditioner's original user manual.
4. Compatible Air Conditioner Models
This YING RAY replacement remote control is compatible with a wide range of Soleus Air, Danby, and ARCTICAIRE air conditioner models. A partial list of compatible models includes:

Image 4.1: A visual representation of the YING RAY remote alongside several other remote control designs, indicating broad compatibility. The text "NO PROGRAMMING NEED!!!" is visible, reinforcing ease of use.
Soleus Air Models:
- LX-100, LX-100BL, LX-120, LX-120BL, LX-140, LX-140BL
- PH5-12R-32S, PH5-13R-35S, PH5 Series, PH5-13R-35D, PH5-13R-3D, PH5-13R-32D, PH5-13R-35
- PH4-10R-01, PH4-12R-01, PH4-13R-01, PH4-14R-01
- PE3-09R-03, PE3-12R-03
- PE1-09R-30
- PA1-10R-32, PA1-12R-32, PA1-14R-32
- MAC-10K, MAC-12K
- HCB-P13HP-D, HCB-R135-A-ID, HCB-R135-A-OD
- FE-08BA, EL-PAC-08E9, SE-PAC-08E9, KY-80E9
Danby / ARCTICAIRE Models:
- APAC9036
- DPAC120068, DPAC10061, DPAC10030, DPAC10071, DPAC9006, DPAC9008
This list is not exhaustive. If your air conditioner model is not listed, please compare your original remote with the images provided or contact customer support for compatibility verification.
5. Troubleshooting
Remote Not Responding / No Power:
- Check Batteries: Ensure batteries are inserted correctly with proper polarity (+/-).
- Replace Batteries: Use fresh "AAA" 1.5V ordinary batteries.
- Battery Contact: If using "Type B" AAA batteries (common in some regions), the positive pole spring inside the remote's battery compartment might need to be gently pulled out slightly to ensure a firm connection. Refer to Image 2.1 in the "Setup and Battery Installation" section for visual guidance.
- Line of Sight: Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Infrared Sensor: Clean the infrared sensor on both the remote and the air conditioner to ensure clear signal transmission.
If the remote control still does not function after attempting these troubleshooting steps, please contact the seller for further assistance.
6. Product Specifications
| Feature | Detail |
|---|---|
| Brand | YING RAY |
| Model Number | 2018102806 |
| Compatible Devices | Air Conditioner (Soleus Air, Danby, ARCTICAIRE) |
| Connectivity Technology | Infrared |
| Battery Type | AAA (1.5V Ordinary Battery) |
| Special Feature | Ergonomic design |
| Color | Same With Item Picture (Grey) |
| Manufacturer | ZHUHAI YINGRAY TRADING CO., LTD. |
7. Warranty and Support
This product is a replacement remote control. For any issues or inquiries regarding its functionality or compatibility, please contact the seller directly. Information regarding specific warranty terms may be provided by the seller at the time of purchase.
If the remote does not work for your air conditioner, please feel free to contact us (the seller) for assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.