Seitron DCW01B0001AN New Wave Wireless Chronostat User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Seitron DCW01B0001AN New Wave Wireless Chronostat. This device is designed to manage your heating or cooling system efficiently through programmable weekly schedules and wireless communication. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

2. Safety Information

Observe the following safety precautions to prevent injury or damage to the device:

• Ensure all electrical connections are made by a qualified professional if required.
• Do not expose the device to extreme temperatures, humidity, or direct sunlight.
• Use only the specified battery type (2x 1.5V AA batteries).
• Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Keep batteries out of reach of children. Dispose of used batteries according to local regulations.

3. Package Contents

Verify that all items are present in the package:

• Seitron DCW01B0001AN Wireless Chronostat
• Mounting screws and wall plugs (may vary by region)
• User Manual (this document)

4. Setup

4.1. Battery Installation

The chronostat requires two 1.5V AA batteries for operation. Follow these steps to install them:

1. Gently open the front cover of the chronostat to reveal the battery compartment.
2. Insert two 1.5V AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
3. Close the front cover securely.

Figure 1: Front view of Seitron DCW01B0001AN Wireless Chronostat with battery compartment open. This image displays the front panel of the Seitron DCW01B0001AN Wireless Chronostat. The battery compartment is open, showing slots for two AA batteries. The display screen is visible at the top, along with control buttons on either side. Two rotary dials for temperature adjustment are located at the bottom.

4.2. Mounting and Wiring

The chronostat should be mounted on an interior wall, away from direct heat sources, drafts, or direct sunlight, at a height of approximately 1.5 meters (5 feet) from the floor for accurate temperature sensing. Use the provided mounting screws and wall plugs.

For remote sensor connection, refer to the wiring diagram on the back of the unit. Connect the remote sensor wires to terminals 2 and 3 as indicated.

Figure 2: Rear view of Seitron DCW01B0001AN Wireless Chronostat showing wiring terminals and product label. This image shows the back of the Seitron DCW01B0001AN Wireless Chronostat. A label indicates 'DCW01B0001AN WEEKLY CHRONOSTAT', '868,150 MHz WIRELESS', and '2x1,5V - AA'. Wiring terminals for power and a remote sensor are visible, along with mounting points.

4.3. Initial Power-On and Pairing

Upon battery installation, the chronostat will power on. Follow the on-screen prompts to set the current time and date. For wireless communication with a receiver unit (sold separately), refer to the receiver's manual for pairing instructions. Typically, this involves pressing a pairing button on both devices within a short timeframe.

5. Operating

5.1. Controls Overview

The chronostat features a central display and several control buttons and rotary dials:

• Display Screen: Shows current temperature, time, day, operating mode, and program status.
• Mode Buttons (Left Side): Buttons for selecting different operating modes (e.g., Manual, Auto, Comfort, Economy).
• Program Button (P): Used to enter and exit programming mode.
• Function Buttons (Right Side): Buttons for power, time/date settings, and other functions.
• Rotary Dials (Bottom): Used for quick temperature adjustments or setting specific values during programming.

5.2. Setting Time and Date

To adjust the current time and date:

1. Press the Time/Date button (often indicated by a clock icon).
2. Use the rotary dials or arrow buttons (if present) to adjust the hour, minute, day, month, and year.
3. Confirm each setting by pressing the OK or Enter button, or by pressing the Time/Date button again to save and exit.

5.3. Programming Weekly Schedule

The chronostat allows for weekly programming to optimize energy consumption. This typically involves setting different temperature levels for various times of the day and days of the week.

1. Press the P (Program) button to enter programming mode.
2. The display will show the current day and a time slot. Use the navigation buttons or dials to select the day and time period you wish to program.
3. Adjust the desired temperature for that period using the rotary dials.
4. Repeat for all desired time slots and days.
5. Press the P button again to save the program and exit programming mode.

5.4. Mode Selection

The chronostat offers various operating modes:

• Automatic Mode: Follows the programmed weekly schedule.
• Manual Mode: Maintains a constant temperature set by the user, overriding the program.
• Comfort Mode: Sets a higher, comfortable temperature.
• Economy Mode: Sets a lower, energy-saving temperature.
• Anti-freeze Mode: Maintains a minimum temperature to prevent freezing (e.g., 5°C).

Press the mode selection buttons on the left side of the unit to cycle through or select the desired operating mode.

5.5. Temperature Adjustment

In Manual, Comfort, or Economy modes, you can adjust the target temperature using the rotary dials at the bottom of the unit. Turning the dial clockwise typically increases the temperature, while turning it counter-clockwise decreases it. The new target temperature will be displayed on the screen.

6. Maintenance

6.1. Battery Replacement

When the battery low indicator appears on the display, replace the batteries promptly to ensure continuous operation. Follow the steps outlined in Section 4.1. Battery Installation. It is recommended to replace both batteries simultaneously with new, high-quality 1.5V AA alkaline batteries.

6.2. Cleaning

Clean the chronostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit, as this may damage the surface or internal components.

7. Troubleshooting

8. Specifications

• Model: DCW01B0001AN
• Brand: Seitron
• Type: Wireless Weekly Chronostat
• Power Supply: 2 x 1.5V AA Batteries
• Wireless Frequency: 868.150 MHz (as per product label)
• Protection Rating: IP30 (as per product label)
• Manufacturer: SEITRON
• ASIN: B07JY87RYS