Instruction Manual

Rugged Radios Motorcycle Hook-and-Loop Fastener Mount Push to Talk Button

Model: PTT-MC-VM-RCA

Image: Rugged Radios brand slogan "Go Further" on a blue background.

Introduction

Thank you for choosing the Rugged Radios Motorcycle Hook-and-Loop Fastener Mount Push to Talk (PTT) Button. This PTT button is designed to provide secure and convenient communication activation for your motorcycle or ATV communication system, specifically compatible with Rugged Radios MH-O-RCA and MH-SPORT harnesses.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your PTT button to ensure optimal performance and longevity.

Product Overview

The PTT-MC-VM-RCA is a durable, handlebar-mountable Push-to-Talk button featuring a hook-and-loop fastener for easy and secure attachment. It connects to your communication harness via an RCA connector, allowing for seamless integration into your existing Rugged Radios setup.

Rugged Radios Motorcycle PTT Button with Hook-and-Loop Mount and RCA Connector

Image: The Rugged Radios PTT button, showing the red button, black housing, hook-and-loop strap, and the RCA connector at the end of its cable.

Key Features:

Hook-and-Loop Fastener Mount: Allows for quick and secure attachment to any motorcycle or ATV handlebar.
RCA Connector: Ensures compatibility with Rugged Radios MH-O-RCA and MH-SPORT motorcycle harnesses.
Durable Construction: Built to withstand the rigors of off-road environments.
Compact Design: Minimizes interference with riding controls.
12-inch Cable Length: Provides sufficient reach for flexible mounting options.

What's in the Box

Rugged Radios Motorcycle Hook-and-Loop Fastener Mount Push to Talk Button (Model: PTT-MC-VM-RCA)

Setup & Installation

Follow these steps to properly install your PTT button:

Identify Mounting Location: Choose a convenient and safe location on your motorcycle or ATV handlebar that allows easy access to the PTT button without obstructing your control of the vehicle. Ensure the cable can reach your communication harness without being stretched or pinched.
Secure the PTT Button: Wrap the integrated hook-and-loop fastener strap around the chosen handlebar location. Pull the strap firmly to ensure a snug fit, preventing the PTT button from rotating or sliding during use.
Connect to Harness: Locate the RCA input on your Rugged Radios MH-O-RCA or MH-SPORT motorcycle harness. Insert the RCA connector from the PTT button cable firmly into the RCA input on the harness. Ensure a secure connection.
Cable Management: Route the PTT cable neatly along your handlebars and frame, securing it with cable ties (not included) if necessary, to prevent it from snagging on moving parts or interfering with your riding.
Test Connection: Before riding, perform a communication test with your radio system to ensure the PTT button is functioning correctly.

Note: This PTT button is designed for use with Rugged Radios MH-O-RCA and MH-SPORT harnesses only. Compatibility with other systems is not guaranteed.

Operating Instructions

Using your Rugged Radios PTT button is straightforward:

Power On Your System: Ensure your Rugged Radios communication system (radio, intercom, headset) is powered on and properly configured for communication.
Initiate Transmission: To transmit your voice, firmly press and hold the red PTT button. Speak clearly into your microphone (part of your headset/helmet kit) while holding the button down.
End Transmission: Release the PTT button to stop transmitting and return to receive mode.

Important: Always ensure the PTT button is fully released when you are not speaking to allow others to transmit and for you to receive incoming communications.

Maintenance

To ensure the longevity and reliable operation of your PTT button, follow these simple maintenance guidelines:

Cleaning: Wipe the PTT button and cable with a damp cloth to remove dirt, dust, or mud. Avoid using harsh chemicals or abrasive cleaners.
Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage. Check the RCA connector for corrosion or bent pins.
Storage: When not in use, store the PTT button in a clean, dry place away from extreme temperatures and direct sunlight.
Connection Check: Before each use, ensure the RCA connection to your harness is secure and free of debris.

Troubleshooting

Problem	Possible Cause	Solution
No transmission when PTT button is pressed.	Loose RCA connection. Communication system not powered on. Incompatible harness. Damaged PTT cable or button.	Ensure RCA connector is fully seated in the harness. Verify your radio and intercom are powered on. Confirm you are using a compatible Rugged Radios MH-O-RCA or MH-SPORT harness. Inspect cable and button for visible damage. If damaged, replacement may be necessary.
PTT button feels loose on handlebar.	Hook-and-loop strap not tight enough. Strap worn out.	Re-tighten the hook-and-loop strap around the handlebar. If the hook-and-loop material is no longer securing properly, consider replacing the PTT button.

Specifications

Model Number	PTT-MC-VM-RCA
Brand	Rugged Radios
Connector Type	RCA
Cable Type	Composite
Cable Length	12 inches (approx. 30.5 cm)
Mounting Type	Hook-and-Loop Fastener (Handlebar Mount)
Compatible Devices	Rugged Radios MH-O-RCA, Rugged Radios MH-SPORT harnesses
Package Dimensions	5.71 x 1.26 x 0.91 inches (14.5 x 3.2 x 2.3 cm)
Item Weight	1.66 ounces (approx. 47 grams)

Warranty & Support

For warranty information and technical support, please contact Rugged Radios directly. Details regarding product warranties are typically available on the official Rugged Radios website or through your purchase documentation.

Contact Information:

Website: www.ruggedradios.com
Refer to your product packaging or the Rugged Radios website for the most current contact details and support resources.

	Rugged Radios Master Communication Kit Installation Guide Installation guide for the Rugged Radios Master Communication Kit. Covers parts, equipment, mounting, wiring, testing, and setup for vehicle communication systems.
	Rugged Radios R1 Digital Handheld Radio User Guide \| Features, Operation, and Safety Comprehensive user guide for the Rugged Radios R1 Digital Handheld Radio. Learn about its features, functions, channel management, PTT operation, side key functions, FM radio mode, and safety guidelines including RF exposure and licensing information for occupational use.
	Rugged Connect BT2 User Guide: Motorcycle Bluetooth Headset Comprehensive user guide for the Rugged Connect BT2, detailing installation and button functions for this motorcycle helmet Bluetooth headset. Learn how to pair, answer calls, control audio, and activate voice commands.
	Rugged Radios RRP800 Intercom User Manual and Configurations Comprehensive user manual and configuration guide for the Rugged Radios RRP800 Intercom system, detailing installation, operation, troubleshooting, and system configurations for 2, 4, and 6-person setups.
	Rugged Radios RRP800 Intercom User Manual: Installation, Configuration, and Operation Guide Detailed user manual for the Rugged Radios RRP800 Intercom system. Covers pre-installation, installation checklist, system configurations (2, 4, 6 person), chaining, operation, troubleshooting, and technical specifications for fire and safety vehicles.
	Rugged Radios Race Guide: Critical Installation and Preparation Procedures This guide provides essential installation and preparation procedures for Rugged Radios communication systems in racing vehicles. It covers critical steps from wiring and antenna mounting to cable management and troubleshooting to ensure optimal performance.

Rugged Radios PTT-MC-VM-RCA