Syantek Remote Control Outlet Wireless Light Switch Kit

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Syantek Remote Control Outlet Wireless Light Switch Kit. This kit allows you to wirelessly control household appliances and lighting with ease, offering convenience and energy savings. Please read this manual thoroughly before use to ensure proper function and safety.

Package Contents

Verify that all items are present in your package:

• 5 x Syantek Wireless Outlets
• 2 x Syantek Remote Controls
• 2 x 12V/23A Batteries (pre-installed in remotes)
• 1 x User Manual

Image: Contents of the Syantek Remote Control Outlet Kit, showing five outlets, two remotes, two batteries, and the user manual.

Product Overview

The Syantek Remote Control Outlet Kit consists of compact wireless outlets and handheld remote controls designed for indoor use. Each outlet features a standard 3-prong plug, a program indicator light, and a program button. The remote controls have five pairs of ON/OFF buttons, allowing individual control of up to five paired outlets.

Image: Detailed view of a Syantek remote control and an outlet, highlighting their dimensions and key components like the program indicator, program button, and 3-prong plug.

Setup Instructions

Your Syantek Remote Control Outlets are pre-programmed for immediate use. Each outlet is assigned to a specific button pair (1-5) on the remote controls. If you need to customize or re-program the outlets, follow the instructions below.

Initial Setup (Plug and Play)

1. Insert the 12V/23A batteries into the remote controls if not already installed.
2. Plug an appliance or light into a Syantek wireless outlet.
3. Plug the wireless outlet into a standard 120V wall receptacle.
4. Use the corresponding ON/OFF buttons on the remote to control the connected device.

Image: Illustration showing one remote control operating multiple Syantek outlets, demonstrating the flexibility of the system.

Programming a Receiver to an Additional Transmitter Button

This procedure allows a single receiver (outlet) to respond to more than one button on a remote, or to a button on a different remote.

1. Ensure no device is plugged into the receiver (outlet).
2. Plug the receiver into a live wall receptacle. Do not press the programming button yet.
3. Press and hold the programming button on the side of the receiver for approximately 5 seconds until the indicator light begins to flash.
4. While the light is flashing, press the desired ON button on the remote control that you wish to pair with the receiver.
5. The indicator light on the receiver will stop flashing and turn off, indicating successful pairing.

Erasing All Receiver Memory/Transmitter Button Pairings

This will clear all programmed remote associations from a receiver, making it unresponsive until re-programmed.

1. Unplug any device from the receiver.
2. Unplug the receiver from the wall receptacle to remove power.
3. While pressing and holding the programming button on the side of the receiver, plug the receiver back into the wall receptacle.
4. Continue holding the button until the indicator light flashes, then release the button. The light will stop flashing, confirming that all memory has been erased.

Reassigning Receiver Control

To change which remote button controls a receiver, first erase its current programming and then reprogram it.

1. Follow the steps for "Erasing All Receiver Memory/Transmitter Button Pairings" (Procedure 2 above).
2. Once the memory is erased, follow the steps for "Programming a Receiver to an Additional Transmitter Button" (Procedure 1 above) to pair it with the new desired remote button.

Operating Instructions

Using your Syantek Remote Control Outlet Kit is straightforward:

• To Turn On: Press the 'ON' button corresponding to the paired outlet on your remote control. The connected appliance will power on.
• To Turn Off: Press the 'OFF' button corresponding to the paired outlet on your remote control. The connected appliance will power off.

The remote control operates using a strong RF signal, capable of working through doors and walls up to 100 feet away without requiring a direct line of sight.

Image: Diagram illustrating the 100-foot signal range of the Syantek remote control, showing it can operate through walls and doors within a home environment.

Image: Examples of common applications for the Syantek remote control outlet, including holiday decorations, home appliances, fans, and lamps.

Maintenance

Battery Replacement

The remote controls use 12V/23A batteries. If the remote's range decreases or it becomes unresponsive, it may be time to replace the battery. To replace:

1. Locate the battery compartment on the back of the remote control.
2. Open the compartment and remove the old battery.
3. Insert a new 12V/23A battery, ensuring correct polarity (+/-).
4. Close the battery compartment.

Cleaning

To clean the outlets and remote controls, wipe them with a soft, dry cloth. Do not use liquid cleaners or immerse them in water.

Troubleshooting

• Outlet not responding to remote:
  • Ensure the outlet is securely plugged into a live wall receptacle.
  • Check if the appliance connected to the outlet is functioning correctly when plugged directly into a wall.
  • Verify the remote control battery is not depleted. Replace if necessary.
  • Re-program the outlet to the desired remote button following the "Reassigning Receiver Control" steps in the Setup section.
• Reduced remote range:
  • Obstructions like thick walls, metal objects, or other electronic devices can interfere with the signal. Try operating the remote closer to the outlet.
  • Replace the remote control battery.
• Outlet remains off after a power interruption:
  • This is a safety feature. After a power outage, the outlet will remain off. Press the 'ON' button on the remote to restore power.
• Multiple buttons pressed simultaneously:
  • Pressing multiple buttons on the same remote or using two remotes at the exact same moment can cause signal interference. Ensure only one button is pressed at a time.

Specifications

Safety Information

• For indoor use only. Do not expose to water or damp conditions.
• Do not exceed the maximum load rating of 10 Amps.
• Ensure the outlet is fully inserted into the wall receptacle.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the device. Contact customer support for assistance.
• Unplug the device from the wall outlet before cleaning.

Warranty and Support

Syantek products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Syantek website. If you encounter any issues or require technical assistance, please contact Syantek customer support through their official channels.