Introduction
Thank you for choosing the WMF Impulse Travel Mug. This manual provides essential information for the safe and effective use, maintenance, and care of your new travel mug. Please read these instructions carefully before first use and retain them for future reference.
The WMF Impulse Travel Mug is designed for keeping beverages warm for up to 6 hours or cold for up to 12 hours, featuring a 360° drink opening and an automatic closure mechanism for convenience and spill prevention.

Image: The WMF Impulse Travel Mug in silver with a black lid, placed on a table in a home setting.
Important Safety Instructions
- Always ensure the lid is securely closed before transporting the mug to prevent leaks.
- Do not overfill the mug. Leave sufficient space for the lid to close without displacement.
- Exercise caution when consuming hot beverages to avoid burns.
- Keep out of reach of children when containing hot liquids.
- This mug is designed for beverages. Do not use for carbonated drinks or food items that may create pressure.
- Do not place the mug in a microwave, oven, or freezer.
- Hand wash only. Do not clean in a dishwasher, as this may damage the insulation properties and sealing components.
Product Components
The WMF Impulse Travel Mug consists of the following main parts:
- Insulated Body: Double-walled stainless steel construction for temperature retention.
- Lid with Automatic Closure: Features a 360° drink opening and a push-button mechanism for opening and closing.
- Silicone Seal: Ensures leak-proof performance when the lid is properly secured.

Image: Disassembled lid components, showing the main lid with handle, the push-button mechanism, and the silicone sealing ring.
Setup and First Use
- Unpacking: Carefully remove the travel mug from its packaging. Retain packaging for future storage or transport if desired.
- Initial Cleaning: Before first use, wash all parts of the travel mug (body and lid) thoroughly by hand with warm water and mild dish soap. Rinse completely and allow to air dry.
- Assembling the Lid: Ensure all lid components (if disassembled for cleaning) are correctly reassembled. The silicone seal must be properly seated to ensure a leak-proof closure.
- Pre-warming/Pre-cooling (Optional): For optimal temperature retention, pre-warm the mug with hot water for 5-10 minutes before adding hot beverages, or pre-cool with cold water for 5-10 minutes before adding cold beverages. Empty the pre-warming/cooling water before filling.

Image: Top-down view into the stainless steel interior of the WMF Impulse Travel Mug, showing its wide opening for easy filling and cleaning.
Operating Instructions
- Filling the Mug: Unscrew the lid and pour your desired beverage into the mug. Do not fill beyond the internal threading to ensure the lid can be securely closed without spillage. The mug's low height allows it to fit under most household coffee machines.
- Securing the Lid: Screw the lid firmly onto the mug body until it is tight. Ensure the silicone seal is properly compressed to create a leak-proof seal.
- Opening for Drinking: Press the button on the top of the lid to open the 360° drink opening. You can drink from any side of the mug.
- Closing After Drinking: Press the button again to close the drink opening. This automatically seals the mug, making it leak-proof for transport.

Image: A user's hand pressing the central button on the lid of the WMF Impulse Travel Mug to activate the automatic closure mechanism.
Care and Maintenance
- Cleaning: Wash the mug and lid by hand after each use. Use warm water and mild dish soap. For thorough cleaning, the lid can be dismantled into its main components (refer to the "Product Components" section for visual guidance).
- Drying: Allow all parts to air dry completely before reassembling and storing to prevent odors or mildew.
- Storage: Store the mug with the lid slightly ajar or removed to allow air circulation.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scourers, or bleach, as these can damage the stainless steel finish and plastic components.
- Dishwasher Use: This product is not dishwasher safe. Hand washing is required to maintain its insulating properties and seal integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mug is leaking. | Lid not screwed on tightly; silicone seal improperly seated or damaged; drink opening not fully closed; mug overfilled. | Ensure lid is screwed on firmly. Check that the silicone seal is correctly positioned and undamaged. Press the lid button to ensure the drink opening is fully closed. Do not overfill the mug. |
| Beverage does not stay hot/cold for stated duration. | Lid not fully closed; mug not pre-warmed/pre-cooled; extreme external temperatures. | Ensure the lid's drink opening is closed. Consider pre-warming or pre-cooling the mug. Avoid leaving the mug in extreme temperatures. |
| Lid mechanism is stiff or difficult to operate. | Residue buildup; components not properly aligned after cleaning. | Disassemble the lid and clean all components thoroughly. Reassemble carefully, ensuring all parts click into place. |
Product Specifications
- Model: WMF Impulse Travel Mug
- Item Number: 0690636040
- Capacity: 0.3 Liters (300 ml)
- Dimensions: Approximately 7.8 cm (3.07 inches) Diameter x 14 cm (5.51 inches) Height
- Weight: Approximately 0.25 kg (8.9 ounces)
- Materials: Cromargan rust-proof 18/10 stainless steel, plastic, silicone
- Insulation: Double-walled
- Temperature Retention: Keeps warm for up to 6 hours, keeps cold for up to 12 hours
- Closure Type: Automatic closure with 360° drink opening
- Care: Hand wash only
Warranty and Support
For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official WMF website. For customer support, product inquiries, or assistance with troubleshooting beyond this manual, please contact WMF customer service through their official channels.
WMF Official Website: www.wmf.com