Introduction
This manual provides essential information for the Hot Wheels 2019 HW Hot Trucks Mercedes-Benz UNIMOG 7/250, Red die-cast model car. Please read these instructions carefully to ensure proper handling and enjoyment of your collectible item.
Product Overview
The Hot Wheels Mercedes-Benz UNIMOG 1300 is a 1:64 scale die-cast model car, part of the 2019 HW Hot Trucks Series. This model features a red finish and intricate detailing, designed for collectors and enthusiasts aged 3 years and up.
Image: Hot Wheels Mercedes-Benz UNIMOG 7/250, Red in its blister packaging.
Setup
The Hot Wheels Mercedes-Benz UNIMOG 7/250 is a ready-to-play die-cast model. No assembly is required.
- Carefully remove the die-cast model from its packaging.
- Inspect the model for any visible damage or manufacturing defects.
- The model is now ready for display or play.
Operating Instructions
This die-cast model is designed for imaginative play and collection. Its wheels are functional, allowing it to roll on flat surfaces.
- Place the vehicle on a smooth, flat surface.
- Gently push the vehicle forward or backward to initiate movement.
- Avoid excessive force or dropping the model to prevent damage.
Image: Side view of the Hot Wheels Mercedes-Benz UNIMOG 7/250, Red model car.
Image: Rear view of the Hot Wheels Mercedes-Benz UNIMOG 7/250, Red model car.
Maintenance
To maintain the condition of your Hot Wheels model:
- Cleaning: Use a soft, dry cloth to gently wipe away dust and dirt. Avoid using harsh chemicals or abrasive materials, as these may damage the paint or decals.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures. Original packaging or display cases are recommended for long-term preservation.
- Handling: Handle the model by its body to avoid bending or breaking smaller parts like mirrors or spoilers.
Troubleshooting
Most issues with die-cast models are related to physical damage or debris.
- Wheels not rolling smoothly: Check for any small debris (e.g., lint, hair) caught in the axles. Gently remove any obstructions. Ensure the wheels are not bent or misaligned.
- Loose parts: If any small parts become loose, they may be reattached with a small amount of model-safe adhesive, if appropriate. Exercise caution and consult a professional if unsure.
Specifications
| Product Dimensions | 6 x 4 x 2 inches |
| Item Weight | 3 ounces |
| Item Model Number | FYB55 |
| Manufacturer Recommended Age | 3 years and up |
| ASIN | B07JPGJC45 |
| Manufacturer | Mattel (listed as CAT in specifications, but product brand is Mattel) |
Note: The manufacturer is listed as "CAT" in some specifications, but the product is branded and manufactured by Mattel.
Warranty Information
This product may be covered by a Limited Lifetime Warranty from Mattel. For specific details regarding warranty coverage, terms, and conditions, please refer to the information provided on the product packaging or contact Mattel customer service.
As per packaging: "LIMITED LIFETIME WARRANTY: Mattel, Inc. warrants that any Hot Wheels® Basic 1:64 scale car purchased from a single pack after January 1, 2013 will be free from defects in material or workmanship for the original purchaser's lifetime."
Support and Contact Information
For assistance or further information, please contact Mattel customer service:
- Website: service.mattel.com
- Phone (US & Canada): 1-800-524-8697
- Phone (UK): 01628 500303
- Phone (Australia): 1300 135 312
- Phone (New Zealand): 0800 102 102
Please note that contact details may vary by region. Refer to your product packaging for the most accurate local information.
Legal Disclaimer
Product code: C4982.
Warning: Not suitable for children under 36 months. Small parts may be generated.
