Introduction
Thank you for choosing the Yaheetech Bird Cage with Stand, Model YA-00090187. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your bird cage. Please read these instructions carefully before use and retain them for future reference.
This bird cage is designed for small to medium-sized birds such as lovebirds, doves, cockatiels, parakeets, and similar species. Its practical design ensures a comfortable and secure environment for your feathered companions.
Package Contents
Before assembly, please ensure all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support.
- Cage panels (front, back, sides, top, bottom)
- Stand components (legs, base shelf, wheels)
- 2 x Wooden Perches
- 2 x Stainless Steel Feeders
- 1 x Pull-out Tray
- Assembly hardware (screws, nuts, etc.)
Image: The complete Yaheetech Bird Cage with Stand, featuring a multi-level design, perches, and feeders. This image shows the overall structure and included accessories.
Setup and Assembly
Follow these steps for proper assembly. It is recommended to assemble the cage in the location where it will be used.
- Assemble the Stand:
- Attach the four legs to the base frame using the provided hardware.
- Secure the bottom storage shelf to the stand legs.
- Insert the four wheels into the designated slots at the bottom of the stand legs. Ensure the two wheels with brakes are positioned for easy access.
- Lock the brakes on the two braked wheels to prevent movement during cage assembly.
Image: Close-up of the stand's bottom storage shelf, demonstrating its capacity for pet supplies. The wheels are visible, indicating mobility.
- Assemble the Cage Base:
- Place the bottom cage panel onto the assembled stand.
- Attach the side panels, front panel, and back panel to the bottom panel and to each other using the provided clips or connectors. Ensure all connections are secure.
- Install Internal Components:
- Insert the wooden perches through the cage bars at desired heights. Ensure they are firmly in place.
- Attach the stainless steel feeders to the cage bars, ensuring they are accessible for your birds and securely fastened to prevent tipping.
Image: A stainless steel feeder bowl filled with birdseed, securely attached to the cage bars. This illustrates the feeder installation.
Image: Three birds (a green conure and two cockatiels) perched on a wooden perch inside the cage, demonstrating proper perch placement and use.
- Install the Top Panel and Roof:
- Place the top cage panel securely onto the assembled cage structure.
- Attach the decorative triple roof sections to the top panel.
- Insert the Pull-out Tray:
- Slide the black pull-out tray into the designated slot at the bottom of the cage, beneath the wire grate.
Image: A close-up view of the black pull-out tray, partially extended from the bottom of the cage, highlighting its easy-cleaning feature.
Image: A detailed diagram illustrating the dimensions of the bird cage and stand, including overall height, width, depth, and bar spacing (1.5cm and 2cm).
Operating Instructions
Placement
Position the cage in a safe, stable location away from direct sunlight, drafts, and extreme temperatures. Ensure the cage is level and secure. The stand's wheels allow for easy repositioning; remember to lock the brakes once the cage is in its desired spot.
Feeding and Watering
Fill the stainless steel feeders with appropriate bird food and fresh water daily. Ensure the feeders are securely attached to prevent spills and provide easy access for your birds.
Access and Security
The cage features a lockable door for secure access. Always ensure the door is properly closed and latched after interacting with your birds or performing maintenance.
Image: Diagram highlighting key features including the triple roof, secure bar slots, stainless steel feeders, lockable door, slide-out tray, and multi-directional casters.
Maintenance and Cleaning
Regular cleaning is crucial for your bird's health and hygiene.
- Daily: Replace food and water. Wipe down any visible droppings on perches or cage bars.
- Weekly:
- Slide out the bottom tray and empty it. Wash the tray with warm, soapy water and disinfect if necessary. Rinse thoroughly and dry before returning.
- Remove and clean perches and feeders.
- Wipe down all accessible cage surfaces with a bird-safe cleaner or warm soapy water.
- Monthly (or as needed): Perform a thorough cleaning of the entire cage. This may involve disassembling parts for better access. Ensure all cleaning agents are bird-safe and rinsed completely.
Image: The Yaheetech bird cage positioned in a living space, demonstrating its integration into a home environment and highlighting the ease of access for cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cage feels unstable. | Loose connections or uneven surface. | Ensure all assembly hardware is tightened. Move cage to a flat, level surface. Lock the stand's brakes. |
| Birds escaping. | Door not properly latched, or bar spacing is too wide for the bird species. | Verify the door is securely closed and latched. Note: The bar spacing is approximately 1.5cm to 2cm. This cage is suitable for small to medium birds. For very small birds like some parakeets, ensure they cannot squeeze through the wider 2cm gaps. |
| Difficulty cleaning the tray. | Accumulated waste. | Clean the tray more frequently. For stubborn residue, soak the tray in warm soapy water before scrubbing. |
Specifications
| Brand | Yaheetech |
| Model Number | YA-00090187 |
| Color | Black |
| Product Dimensions (L x W x H) | 59.5 cm x 59.5 cm x 140 cm (approx. 23.4 x 23.4 x 55.1 inches) |
| Material | Metal |
| Special Features | Lightweight, Mobile Stand with Brakes, Pull-out Tray, Storage Shelf |
| Included Components | Wooden Perches, Metal Feeders, Pull-out Tray |
| Number of Levels | 1 (main cage area) |
| Recommended for Breed | Small to Medium Breeds (e.g., Lovebirds, Doves, Cockatiels, Parakeets, Parrots) |
| Bar Spacing | Approximately 1.5 cm to 2 cm (as noted in customer reviews) |
Warranty and Support
For warranty information or customer support, please refer to the retailer's policy or contact Yaheetech directly through their official website or customer service channels. Please have your model number (YA-00090187) and purchase details ready when contacting support.
