LightmaXX Nano UV Bar LED Instruction Manual

1. Introduction

Thank you for purchasing the LightmaXX Nano UV Bar LED. This product is designed to produce a black light effect, ideal for stage lighting, parties, and special events. It features 12 powerful 3W UV LEDs, providing a total output of 36W. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Figure 1: Front view of the LightmaXX Nano UV Bar LED, showcasing its 12 illuminated UV LEDs.

2. Safety Instructions

Always observe the following safety precautions to prevent electric shock, fire, or injury:

• Read all instructions: Before operating the device, read and understand all safety and operating instructions.
• Power source: Connect the device only to a power supply of the voltage specified in this manual or on the product label.
• Grounding: Ensure the device is properly grounded to prevent electric shock.
• Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
• Water and moisture: Do not expose the device to rain or moisture. Do not use near water.
• Heat: Keep the device away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Cleaning: Unplug the device from the wall outlet before cleaning. Use a dry cloth for cleaning.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• UV Radiation: Avoid direct exposure to UV light. Prolonged exposure can be harmful to eyes and skin.

3. Package Contents

Please check the package contents upon unpacking. If any items are missing or damaged, contact your retailer immediately.

• 1 x LightmaXX Nano UV Bar LED
• 2 x Mounting Brackets
• 1 x Power Cable with In-line Switch
• 1 x User Manual (this document)

4. Setup

Follow these steps to set up your LightmaXX Nano UV Bar LED:

1. Unpacking: Carefully remove the UV bar and all accessories from the packaging.
2. Attaching Mounting Brackets: The UV bar comes with two adjustable mounting brackets. Attach these to the sides of the bar using the provided screws. Ensure they are securely fastened. These brackets allow for flexible positioning on a flat surface or for suspension.


Figure 2: Side view illustrating the attachment of the mounting bracket to the UV bar.

3. Positioning: Place the UV bar on a stable, flat surface or mount it securely to a truss or ceiling using appropriate clamps (not included). Ensure the area is well-ventilated and free from obstructions.
4. Connecting Power: Connect the power cable to the power input on the back of the UV bar. Ensure the connection is firm.


Figure 3: Rear view of the UV bar showing the power cable connected to the unit.

5. Powering On: Plug the power cable into a suitable electrical outlet (230V AC). The unit is now ready for operation.

5. Operating

The LightmaXX Nano UV Bar LED is designed for simple operation.

1. Power Switch: Locate the in-line ON/OFF switch on the power cable.


Figure 4: The UV bar with its power cable, highlighting the in-line ON/OFF switch.



Figure 5: A detailed view of the in-line ON/OFF switch for controlling the power.

2. Turning On: Flip the switch to the 'ON' position. The UV LEDs will illuminate, producing the black light effect.
3. Turning Off: Flip the switch to the 'OFF' position to turn off the UV bar. For complete power disconnection, unplug the device from the wall outlet.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your UV bar.

• Cleaning: Disconnect the power before cleaning. Use a soft, dry, lint-free cloth to wipe down the exterior of the unit. Do not use abrasive cleaners or solvents.
• LEDs: The LEDs are designed for long life and typically do not require replacement. If an LED fails, contact qualified service personnel.
• Storage: When not in use for extended periods, store the UV bar in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the power cable for any signs of damage. If the cable is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid a hazard.

7. Troubleshooting

If you encounter issues with your LightmaXX Nano UV Bar LED, refer to the following table for common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

LightmaXX is committed to customer satisfaction. Your LightmaXX Nano UV Bar LED comes with the following:

• Personalized Customer Service: For any inquiries or assistance, please contact our customer service team.
• 30-Day Money-Back Guarantee: If you are not completely satisfied with your purchase, you may return it within 30 days for a full refund.
• 3-Year Music Store Warranty: This product is covered by a 3-year warranty from Music Store, ensuring peace of mind regarding manufacturing defects and performance issues.

For warranty claims or technical support, please refer to your purchase documentation or visit the official LightmaXX/Music Store website for contact information.