Flos Bellhop Battery Portable LED Table Lamp User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your Flos Bellhop Battery Portable LED Table Lamp. Please read this manual thoroughly before operating the device and retain it for future reference.

The Flos Bellhop Battery is a modern, portable LED table lamp designed for indoor use. It features a polycarbonate construction, an integrated rechargeable battery, and a dimmable light source, offering flexibility and ambient lighting.

2. Safety Instructions

• Ensure the lamp is placed on a stable, flat surface to prevent tipping.
• This product is designed for indoor use only (IP20 rating). Do not expose to water, high humidity, or extreme temperatures.
• Do not attempt to open or modify the lamp. Servicing should only be performed by qualified personnel.
• Keep away from direct heat sources and flammable materials.
• Use only the charging cable and adapter provided or specified by Flos.
• Do not look directly into the LED light source for extended periods.
• Dispose of the battery and lamp according to local regulations at the end of its life cycle.

3. Package Contents

Verify that all items are present in the package:

• Flos Bellhop Battery Portable LED Table Lamp
• Charging Cable (USB-C or similar, specific type not detailed in provided data)
• User Manual (this document)

4. Setup

4.1 Initial Charging

Before first use, fully charge the lamp. Connect the charging cable to the lamp's charging port and plug the other end into a suitable power source (e.g., USB wall adapter). The charging indicator (if present, refer to visual cues on the lamp) will show the charging status. A full charge typically takes several hours.

4.2 Placement

Place the Bellhop lamp on any flat, stable surface indoors. Its portable design allows for flexible placement in various rooms, such as living areas, bedrooms, or offices. Ensure it is not exposed to moisture or direct sunlight.

Image 1: The Flos Bellhop Battery Portable LED Table Lamp in Grey. This image displays the lamp's sleek, mushroom-like design with its cylindrical base and domed shade, highlighting the central power/dimmer button.

5. Operating Instructions

5.1 Power On/Off

Locate the button on the base of the lamp. Press the button once to turn the lamp on. Press it again to turn the lamp off.

5.2 Dimming Function

The Bellhop lamp features an integrated dimmer. While the lamp is on, press and hold the button to cycle through different brightness levels. Release the button when the desired brightness is reached. The lamp will typically remember the last brightness setting when turned off and on again.

5.3 Battery Life

The lamp is powered by a rechargeable battery, offering cordless operation. Battery life varies depending on the brightness level selected. When the battery is low, the light output may decrease, or an indicator light (if present) may signal the need for recharging.

Image 2: Two Flos Bellhop lamps illuminating an outdoor deck area at dusk. This image demonstrates the lamp's portability and ability to provide ambient lighting in various settings, though it is rated for indoor use.

6. Maintenance

6.1 Cleaning

To clean the lamp, ensure it is turned off and disconnected from the charging cable. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate finish.

6.2 Battery Care

To prolong battery life, avoid fully discharging the lamp frequently. Recharge the lamp regularly, even if not in constant use. If storing the lamp for an extended period, ensure it is partially charged (e.g., 50%) and recharge it every few months.

6.3 LED Light Source

The Flos Bellhop Battery lamp uses an integrated LED light source. The LED is not user-replaceable. If the LED fails, contact Flos customer support for assistance.

7. Troubleshooting

• Lamp does not turn on:
  • Ensure the battery is charged. Connect the lamp to its charger and allow it to charge for at least 30 minutes before attempting to turn it on again.
  • Verify the charging cable and power adapter are functioning correctly.
• Lamp does not dim:
  • Ensure you are pressing and holding the button to activate the dimming function, not just pressing it briefly.
• Short battery life:
  • Battery life is shorter at higher brightness settings. Try using a lower brightness level.
  • Ensure the lamp is fully charged before use. Over time, rechargeable batteries may experience reduced capacity.
• Charging issues:
  • Check that the charging cable is securely connected to both the lamp and the power source.
  • Try a different USB power adapter or charging port.

If problems persist, contact Flos customer support.

8. Specifications

Image 3: A technical diagram illustrating the dimensions of the Flos Bellhop lamp. It shows a diameter of 125 mm (4.9 inches) and a height of 210 mm (8.26 inches).

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Flos website. Keep your proof of purchase for any warranty claims.