Introduction
Thank you for choosing the Lucid Mid-Rise Upholstered Headboard. This headboard is designed to enhance the aesthetic and comfort of your bedroom with its elegant diamond tufting and adjustable height. This manual provides comprehensive instructions for assembly, care, and troubleshooting to ensure a seamless experience.
Safety Information
- Always follow assembly instructions carefully.
- Ensure all hardware is securely tightened before use.
- Do not allow children to climb on or play with the headboard.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- If mounting to a wall, ensure the wall structure can support the weight of the headboard.
Package Contents
Before beginning assembly, verify that all parts are present. The headboard's back panel contains a hidden compartment where the legs, modification plates, and hardware are stored for shipping.
- Upholstered Headboard
- Predrilled Legs (2)
- Modification Plates (for bed frame attachment)
- Wall Mounts (optional, for floating headboard installation)
- Hardware (screws, washers, etc.)

Figure 1: Integrated storage compartment housing all necessary components and hardware.
Assembly Instructions
The Lucid Mid-Rise Upholstered Headboard offers two primary installation methods: attachment to a bed frame or wall mounting. Assembly typically takes less than 5 minutes.
Method 1: Attaching to a Bed Frame
- Gather Hardware: Uncover the back panel of the headboard to access the predrilled legs, modification plates, and hardware.
- Attach Legs: Secure both predrilled legs to the headboard using the provided hardware. Ensure they are firmly attached.
- Adjust Height: The headboard height is adjustable in two-inch increments, ranging from a minimum of 34 inches to a maximum of 46 inches (measured from the floor to the top of the headboard). Select the desired height before attaching to your bed frame.
- Attach to Bed Frame: Align the headboard legs with the mounting points on your Full or Full XL size bed frame. Use the provided modification plates and hardware to securely attach the headboard to the bed frame.
Method 2: Wall Mounting (Floating Headboard)
- Gather Hardware: Access the wall mounts and associated hardware from the headboard's back panel.
- Attach Mounting Blocks: Attach the mounting blocks to the top rear of the headboard using the provided screws.
- Measure and Level: Carefully measure and mark the desired height and position on your wall. Use a level to ensure the marks are perfectly horizontal.
- Screw in Wall Mounts: Screw the wall mounts into the marked positions on your wall. Ensure they are securely fastened, using appropriate wall anchors if necessary.
- Lift and Slide: Carefully lift the headboard and slide the mounting blocks on the headboard into the wall mounts until it is securely seated.

Figure 2: Visual guide for headboard assembly, including gathering hardware, attaching mounting blocks, screwing in wall mounts, and lifting the headboard into place.

Figure 3: Detailed dimensions of the headboard, showing 55 inches width, 20 inches actual headboard height, and an adjustable height range from 34 to 45.5 inches from floor to top.
Operating Instructions
Once assembled, your Lucid Mid-Rise Upholstered Headboard requires no complex operation. Its primary function is to provide a stylish and comfortable backrest for your bed. The adjustable height feature allows you to customize its position relative to your mattress for optimal comfort and aesthetic appeal.
Adjusting Height
If you need to adjust the height after initial assembly, carefully loosen the screws connecting the legs to the headboard (for bed frame attachment) or the wall mounts (for wall mounting). Slide the headboard to the desired height within the 34-inch to 46-inch range and re-tighten all screws securely.

Figure 4: The headboard provides a comfortable and stylish backdrop for your bed.
Maintenance
To maintain the appearance and longevity of your upholstered headboard, follow these simple care instructions:
- Cleaning: For general cleaning, wipe the headboard with a dry cloth to remove dust. For spills or stains, spot clean only with a mild detergent and a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the fabric.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause the fabric color to fade over time.
Troubleshooting
If you encounter any issues with your Lucid Mid-Rise Upholstered Headboard, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Headboard feels wobbly or unstable. | Loose connections; improper assembly. | Ensure all screws connecting the legs to the headboard and the headboard to the bed frame (or wall mounts) are fully tightened. Review assembly steps. |
| Headboard is too low/high relative to the mattress. | Incorrect height adjustment. | Adjust the headboard's height using the multiple predrilled holes on the legs. Loosen screws, slide to desired height, and re-tighten. |
| Missing parts or hardware. | Parts may be overlooked in packaging or genuinely missing. | Check the hidden compartment in the back of the headboard thoroughly. If parts are still missing, contact Lucid customer support. |
| Difficulty attaching to bed frame. | Incompatible bed frame or alignment issues. | Ensure your bed frame is compatible. Use the provided modification plates if needed. For wall mounting, ensure accurate measurements and leveling. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LUFFRDST21HB |
| Size | Full/Full XL |
| Color | Stone |
| Style | Diamond Tufting |
| Upholstery Fabric Type | 100% Polyester |
| Product Dimensions | 55.1"W x 3.5"D (depth of headboard) |
| Adjustable Height Range | 34" to 46" (from floor to top of headboard) |
| Mounting Type | Bed Frame Mount or Wall Mount |
| Item Weight | 1 pounds |
| Assembly Required | Yes (minimal) |
Warranty and Support
The Lucid Mid-Rise Upholstered Headboard is backed by a Limited Lifetime Warranty. This warranty covers any manufacturing defects or poor workmanship from the original purchaser. For specific details regarding warranty claims or to obtain support, please refer to the warranty documentation included with your purchase or visit the official Lucid website.
For further assistance, please contact Lucid customer support through their official channels. When contacting support, please have your product model number (LUFFRDST21HB) and proof of purchase readily available.