1. Introduction
Thank you for choosing the Cecotec Ready Warm 5200 Box Ceramic Wall Heater. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.
1.1 Safety Information
- Ensure the heater is installed on a solid, non-combustible surface.
- Do not cover the heater or block its air inlets/outlets.
- Keep flammable materials at a safe distance from the heater.
- This appliance is equipped with IPX2 splash protection, making it suitable for use in bathrooms, but it should not be directly exposed to water spray.
- Always unplug the heater before cleaning or maintenance.
- Do not operate the heater with a damaged cord or plug.
- Supervise children and individuals with reduced physical, sensory, or mental capabilities when near the appliance.
2. Package Contents
Upon unpacking, please verify that all components are present and undamaged:
- Cecotec Ready Warm 5200 Box Ceramic Wall Heater Unit
- Wireless Remote Control
- Mounting Hardware (screws, wall plugs)
- User Manual
Front view of the Cecotec Ready Warm 5200 Box Ceramic Wall Heater, showcasing its digital display and air outlet.
3. Setup and Installation
Follow these steps for proper installation of your wall heater:
3.1 Choosing a Location
- Select a wall location that is clear of obstructions and at least 1 meter (3 feet) away from curtains, furniture, and other flammable materials.
- Ensure the wall can support the weight of the heater (approximately 2.3 kg).
- For bathroom installation, ensure the location complies with local electrical safety regulations and is not directly above a bathtub or shower. The IPX2 rating protects against dripping water.
3.2 Wall Mounting
- Mark the desired mounting points on the wall using the heater's mounting holes as a template. Ensure the marks are level.
- Drill holes at the marked positions. The drill bit size should match the provided wall plugs.
- Insert the wall plugs into the drilled holes.
- Secure the mounting bracket (if separate) or the heater directly to the wall using the provided screws. Do not overtighten.
- Once securely mounted, plug the heater into a suitable electrical outlet.
The Cecotec Ready Warm 5200 Box Ceramic Wall Heater mounted on a wall, demonstrating its compact design.
4. Operating Instructions
Your Cecotec Ready Warm 5200 heater can be operated via its digital control panel or the wireless remote control.
4.1 Control Panel
The digital display shows the current temperature and settings. Buttons on the unit allow for basic control.
4.2 Remote Control
The wireless remote control provides full functionality from a distance.
The wireless remote control for the heater, showing power, mode, timer, and temperature adjustment buttons.
4.3 Basic Functions
- Power On/Off: Press the power button on the unit or remote to turn the heater on or off.
- Mode Selection: Cycle through the 3 operating modes (e.g., Fan, Low Heat (1000W), High Heat (2000W)) using the mode button.
- Temperature Adjustment: Use the '+' and '-' buttons to set the desired temperature. The heater will maintain this temperature.
- Timer Function: Activate the 12-hour programmable timer. The heater will automatically shut off after the set duration.
An illustration depicting the Cecotec Ready Warm 5200 Box Ceramic Wall Heater actively emitting warm air.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and longevity of your heater.
- Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to gently remove dust from the air inlets and outlets.
- Do not immerse the heater in water or any other liquid.
- Store the heater in a cool, dry place when not in use.
6. Troubleshooting
If you encounter issues with your heater, refer to the following table before contacting support:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; Power button not pressed; Overheat protection activated. | Check power cord connection and wall outlet; Press power button; Unplug, wait 30 minutes, then plug back in. |
| No heat output. | Fan mode selected; Temperature setting too low. | Select a heat mode (1000W or 2000W); Increase the desired temperature setting. |
| Remote control not working. | Batteries depleted; Obstruction between remote and heater. | Replace remote control batteries; Ensure clear line of sight to the heater's receiver. |
| Heater shuts off unexpectedly. | Overheat protection activated; Timer function active. | Check for obstructions around the heater; Unplug, wait 30 minutes, then plug back in; Check timer settings. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Cecotec |
| Model Number | 548405328 |
| Color | White |
| Dimensions (L x W x H) | 19.6 x 12 x 50.2 cm |
| Weight | 2.3 Kilograms |
| Power | 2000 Watts (Max) |
| Voltage | 220 Volts |
| Number of Speeds/Modes | 3 |
| Noise Level | 44 dB |
| Special Features | Remote Control, Digital Display, Timer, Overheat Protection, IPX2 Splash Protection |
| Mounting Type | Wall Mount |
| Recommended Use | Indoor, Bathrooms |
8. Warranty and Support
8.1 Warranty Information
Cecotec products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Cecotec website for detailed warranty terms and conditions. Spare parts availability is indicated for 10 years.
8.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Cecotec customer support. Contact information can typically be found on the official Cecotec website or on the product packaging.
You can also visit the product page on Amazon for additional resources and customer reviews.
