1. Introduction
This user manual provides essential information for the safe and efficient operation of your Cecotec Ready Warm 6150 Ceramic Oscillating Bathroom Heater. Please read these instructions carefully before use and retain them for future reference.
The Cecotec Ready Warm 6150 is a portable ceramic heater designed to provide rapid and efficient heating for spaces up to 25 m². It features an adjustable thermostat, multiple operating modes, and advanced safety systems.
2. Safety Instructions
WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or property damage.
- Always place the heater on a firm, level, and stable surface.
- Do not cover the heater or obstruct its air inlets/outlets. This can cause overheating.
- Keep flammable materials (curtains, furniture, bedding) at least 1 meter (3 feet) away from the heater.
- Do not use the heater in bathrooms, laundry areas, or similar locations where it may come into contact with water.
- Ensure the voltage indicated on the rating label matches your mains voltage.
- Do not operate the heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- Unplug the heater when not in use or before cleaning.
- The heater is equipped with a safety grille to prevent access to internal components. Do not attempt to bypass or remove it.
- The Tip-over safety sensor automatically shuts off the heater if it is accidentally knocked over or placed in an unusual position.
- The Overprotect system automatically shuts off the heater to prevent overheating, protecting both the device and the room.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Overview
Familiarize yourself with the main parts of your Cecotec Ready Warm 6150 heater.
Image 3.1: Front view of the Cecotec Ready Warm 6150 heater, showcasing its compact, white design with a perforated grille.
Image 3.2: Top view of the heater's control dial, showing settings for power levels and modes.
Key Components:
- Heating Element: Ceramic heating technology for rapid heat emission.
- Control Dial: Located on top, used to select power modes and adjust thermostat.
- Safety Grille: Front grille protecting the heating element.
- Power Cord: For connecting to an electrical outlet.
- Ergonomic Handle: Integrated for easy portability (EasyGo system).
- Indicator Light: Illuminates when the heater is operating.
4. Setup
- Unpack: Carefully remove the heater from its packaging. Retain packaging for storage or transport.
- Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and prevent fire hazards.
- Power Connection: Plug the power cord into a suitable electrical outlet. Ensure the outlet meets the heater's power requirements (230V, 1500W).
5. Operating Instructions
The Cecotec Ready Warm 6150 features a control dial for easy operation.
Control Dial Settings:
Image 5.1: Close-up of the control dial, indicating various operational modes and power levels.
- Off (0): Turns the heater off.
- Cool Mode (Fan Function): Activates the fan without heat, providing air circulation.
- Eco Mode (750 W): Provides a lower heat output for energy-efficient heating.
- Turbo Mode (1500 W): Delivers maximum heat output for rapid warming of larger spaces.
Oscillation Function (RotateWind System):
The heater features an automatic 90° oscillation function to distribute heat more widely across the room. To activate or deactivate oscillation, refer to the specific marking on the control dial or a dedicated button if present (usually integrated with the main dial for this model).
Thermostat Adjustment:
The control dial also allows you to adjust the desired temperature. Rotate the dial towards 'MIN' for lower temperatures or 'MAX' for higher temperatures. The heater will cycle on and off to maintain the set temperature.
6. Maintenance and Cleaning
WARNING: Always unplug the heater and allow it to cool completely before cleaning or performing any maintenance.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Dust Removal: Use a vacuum cleaner with a brush attachment to gently remove dust from the air inlets and outlets. Ensure these areas remain clear of obstructions.
- Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging.
- Do not immerse the heater in water or any other liquid.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; Tip-over switch activated; Overheat protection activated. | Check if the power cord is securely plugged in. Ensure the wall outlet is functioning. Place the heater upright on a stable surface. Unplug the heater, let it cool for 30 minutes, then plug it back in. |
| Heater produces insufficient heat. | Incorrect mode selected; Thermostat set too low; Room size exceeds heater capacity. | Ensure Turbo Mode (1500 W) is selected. Adjust the thermostat to a higher setting. The heater is designed for spaces up to 25 m². |
| Oscillation is not working. | Oscillation function not activated. | Check the control dial or any dedicated oscillation button to ensure the function is engaged. |
| Unusual noise during operation. | Dust or debris in the fan; Loose component. | Unplug the heater and carefully clean the air inlets/outlets. If the noise persists, discontinue use and contact customer support. |
If you encounter problems not listed here, or if the issue persists after attempting the solutions, please contact Cecotec customer support.
8. Specifications
| Brand | Cecotec |
| Model Name | Ready Warm 6150 |
| Model Number | 548405310 |
| Power | 1500 Watts (Max) |
| Voltage | 230 Volts (approx.) |
| Material | Ceramic |
| Dimensions (L x W x H) | 23.2 x 15.5 x 16.5 cm |
| Weight | 1.42 Kilograms |
| Number of Speeds/Modes | 3 (Cool, Eco, Turbo) |
| Special Features | Portable, Oscillating (90°), Adjustable Thermostat, Overheat Protection, Tip-over Safety Sensor, Low Noise (30 dB) |
| Recommended Use | Indoor residential spaces (up to 25 m²) |
9. Warranty and Support
Cecotec products are manufactured to high-quality standards. In the unlikely event of a defect or malfunction, please refer to your purchase documentation for specific warranty terms and conditions.
Spare parts for this product are available for a period of 10 years from the date of purchase.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Cecotec customer support through their official website or the retailer where the product was purchased.
