CLOUDY BAY LSF410850WH

Download PDF
Contents

CLOUDY BAY 6.5-inch Motion Sensor LED Flush Mount Ceiling Light

Model: LSF410850WH

Brand: CLOUDY BAY

1. Introduction

The CLOUDY BAY 6.5-inch Motion Sensor LED Flush Mount Ceiling Light (Model LSF410850WH) is designed for indoor use, providing efficient and automatic illumination in areas such as garages, walk-in closets, attics, and pantries. This fixture features a motion sensor for hands-free operation and a 5000K bright daylight color temperature, enhancing visibility and convenience.

2. Safety Information

  • Always turn off power at the circuit breaker before installation, maintenance, or servicing.
  • Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
  • Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
  • Ensure all electrical connections are secure and comply with local electrical codes.
  • This fixture is designed for 120V AC hard-wire operation; it is not battery or solar powered.
  • Not suitable for use with dimmers.
  • This product is ETL certified for safety and quality.

3. Package Contents

Verify that all components are present before beginning installation:

  • 1 x CLOUDY BAY 6.5-inch Motion Sensor LED Ceiling Light Fixture
  • 1 x Mounting Bracket
  • 4 x Mounting Screws
  • 3 x Wire Nuts
  • 1 x User Manual
Product dimensions and package contents
Figure 3.1: Illustration of the product dimensions and included accessories: the light fixture, mounting bracket, screws, wire nuts, and user manual.

4. Specifications

BrandCLOUDY BAY
Model NumberLSF410850WH
Product Dimensions7"L x 7"W x 1"H
Diameter6.5 inches
Height1.1 inches
Power SourceCord-electric (120V AC)
Wattage10W (equivalent to 60W incandescent)
Lumen Output600 Lumens
Color Temperature5000K (Bright Day Light)
Color Rendering Index (CRI)90+
Special FeatureMotion Sensor
Motion Detection AngleUp to 120 degrees
Motion Detection DistanceUp to 16 feet
Auto-off Time30 seconds (after no motion detected)
Installation TypeFlush Mount (Ceiling or Wall)
Indoor/Outdoor UsageIndoor (Wet Location rated)
MaterialAluminum, Plastic
Finish TypeWhite
CertificationETL certified

5. Installation

Follow these general steps for installation. Always refer to the detailed diagrams in the included user manual for specific guidance.

  1. Prepare for Installation: Turn off power to the electrical box at the circuit breaker. Use a voltage tester to confirm the power is off.
  2. Attach Mounting Bracket: Secure the provided mounting bracket to the junction box on the ceiling or wall using the appropriate screws.
  3. Wire Connections: Connect the fixture's electrical wires to the household electrical wires. Typically, connect the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the green or bare copper ground wire from the fixture to the ground wire from the junction box. Use the provided wire nuts to secure these connections.
  4. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it in place.
  5. Restore Power: Once the fixture is securely installed and all connections are made, restore power at the circuit breaker.
CLOUDY BAY motion sensor light installed on a ceiling
Figure 5.1: The CLOUDY BAY motion sensor ceiling light installed flush on a ceiling, demonstrating its low-profile design.
Diagram showing wall mount vs ceiling mount detection ranges
Figure 5.2: This diagram illustrates the different detection ranges for wall mount and ceiling mount installations. For ceiling mount, the sensor covers a wider area, while for wall mount, it detects motion across a horizontal path.

Video 5.1: This video demonstrates the installation process and functionality of the 120V 6.5-inch motion sensor ceiling light. It shows how the light activates upon motion detection and its application in various indoor settings.

6. Operating Instructions

The CLOUDY BAY Motion Sensor LED Flush Mount Ceiling Light is designed for automatic operation:

  • Motion Activation: The light automatically activates when motion is detected within its sensing range. This occurs both during the day and at night.
  • Automatic Shut-off: The light will remain on as long as continuous motion is detected. After approximately 30 seconds of no detected motion, the light will automatically turn off.
Diagram illustrating motion detection range and auto-off time
Figure 6.1: This diagram illustrates the motion detection capabilities, showing a 120-degree detecting angle, an installation height of 8-10 feet, and a maximum detecting range of 16 feet. The light turns off 30 seconds after motion ceases.
Woman with laundry basket in a brightly lit laundry room with 5000K daylight
Figure 6.2: A woman in a laundry room, illuminated by the 5000K bright daylight of the CLOUDY BAY motion sensor light, highlighting its application in utility areas.

7. Motion Sensor Parameters

The motion sensor features fixed parameters for optimal performance in various indoor environments:

  • Detection Angle: The sensor covers an area of up to 120 degrees.
  • Detection Distance: Motion can be detected up to 16 feet from the fixture.
  • Auto-off Time: The light will turn off approximately 30 seconds after the last motion is detected. This setting is not adjustable.
  • Optimal Installation Height: For ceiling mount applications, an installation height of 8-10 feet is recommended for effective motion detection.

8. Maintenance

To ensure the longevity and optimal performance of your CLOUDY BAY motion sensor light, follow these simple maintenance guidelines:

  • Cleaning: Ensure the power to the fixture is turned off at the circuit breaker before cleaning. Clean the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
  • Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified electrician.

9. Troubleshooting

If you encounter issues with your motion sensor light, refer to the following troubleshooting steps:

  • Light does not turn on:
    • Check the power supply at the circuit breaker to ensure it is on.
    • Verify that all wire connections are secure and correctly installed.
    • Ensure that motion is within the sensor's detection range (up to 16 feet and 120 degrees).
  • Light stays on continuously:
    • Ensure there is no continuous motion within the sensor's range.
    • Check for any obstructions near the sensor that might be causing false triggers.
  • Light turns off too quickly/slowly:
    • The auto-off time is fixed at approximately 30 seconds after no motion is detected. This setting is not adjustable.

10. Warranty and Support

CLOUDY BAY offers a 5-year warranty for this product, covering defects in materials and workmanship under normal use. For any product issues, technical support, or warranty claims, please contact CLOUDY BAY customer service. Keep your purchase receipt for warranty validation.

11. Product Overview and Applications

The CLOUDY BAY 6.5-inch Motion Sensor LED Flush Mount Ceiling Light is designed for versatile indoor applications, providing bright and efficient lighting where needed.

CLOUDY BAY 6.5-inch Motion Sensor LED Flush Mount Ceiling Light
Figure 11.1: The CLOUDY BAY 6.5-inch Motion Sensor LED Flush Mount Ceiling Light, showcasing its compact and functional design with an integrated motion sensor.
High performance LED light with 600 lumens and CRI 90+
Figure 11.2: This image highlights the high performance of the light, featuring upgraded LED chips for higher brightness (600 Lumens) and lower energy consumption (10W), along with a high Color Rendering Index (CRI 90+).
Comparison of High CRI 90+ CLOUDY BAY light vs. other lights with CRI < 70+
Figure 11.3: A visual comparison demonstrating the enhanced color accuracy, improved color vibrancy, and reduced color distortion achieved with the CLOUDY BAY light's high CRI (90+) compared to lights with lower CRI (<70+).
Examples of wide application in walk-in closets, hallways, laundry rooms, and attics
Figure 11.4: This image showcases the wide range of applications for the motion sensor light, including walk-in closets, hallways, laundry rooms, and attics, illustrating its versatility in various indoor spaces.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.