Manuals+

Globe Electric 67068

Globe Electric 67068 Holden 70" Floor Lamp Instruction Manual

Model: 67068 - Matte Brass Finish

1. Introduction

This manual provides essential information for the safe and efficient use of your Globe Electric 67068 Holden 70" Floor Lamp. Please read all instructions carefully before assembly and operation. Keep this manual for future reference.

2. Safety Information

  • Indoor Use Only: This lamp is designed for indoor residential use. Do not use outdoors or in wet locations.
  • Electrical Safety: Ensure the power outlet matches the lamp's voltage (120 Volts). Always unplug the lamp before cleaning, changing the bulb, or performing any maintenance.
  • Bulb Requirements: Use only one E26/Medium Base 60W MAX bulb (sold separately). Exceeding the maximum wattage may cause overheating and damage.
  • Placement: Place the lamp on a stable, level surface to prevent tipping. Keep the cord away from high-traffic areas to avoid tripping hazards.
  • Cleaning: Do not use liquid or abrasive cleaners. Clean with a soft, dry cloth.

3. Package Contents

Verify that all components are present before beginning assembly:

  • Lamp Base
  • Lamp Pole Sections (multiple, to be screwed together)
  • Lamp Head with Bulb Socket
  • Power Cord with In-Line Foot Switch
  • Instruction Sheet (this document)

Note: The E26/Medium Base 60W MAX bulb is sold separately and is not included in the package.

Diagram showing the dimensions of the Holden Floor Lamp, including height, base diameter, and arm length.
Figure 1: Holden Floor Lamp Dimensions. This diagram illustrates the lamp's overall height of 70 inches (177.8 cm), base diameter of 10 inches (25.4 cm), and the arm length of 14.6 inches (37.1 cm). It also indicates the position of the in-line foot switch and suggests compatible bulb types (not included).

4. Setup and Assembly

Follow these steps to assemble your floor lamp:

  1. Carefully unpack all components from the packaging.
  2. Place the lamp base on a flat, stable surface.
  3. Screw the bottom pole section into the lamp base, turning clockwise until secure.
  4. Continue screwing the remaining pole sections together, ensuring each connection is tight.
  5. Attach the lamp head (with the bulb socket) to the top pole section, turning clockwise until firmly in place.
  6. Insert an E26/Medium Base 60W MAX bulb (sold separately) into the socket.
  7. Plug the power cord into a standard 120V electrical outlet.
Packaging for the Holden Floor Lamp, showing the lamp's design and key features.
Figure 2: Product Packaging. The packaging displays the Holden Floor Lamp in Matte Brass, highlighting its minimalist design and the in-line foot switch.

5. Operating Instructions

The Globe Electric Holden Floor Lamp features a convenient in-line foot switch for easy operation.

  • To turn the lamp ON, gently press the foot switch located on the power cord.
  • To turn the lamp OFF, press the foot switch again.
Video 1: 360-Degree View of the Holden Floor Lamp. This video provides a comprehensive 360-degree rotation of the Globe Electric 67068 Holden Floor Lamp, showcasing its matte brass finish and minimalist design from all angles.

6. Maintenance

  • Cleaning: To clean the lamp, ensure it is unplugged. Use a soft, dry, non-abrasive cloth to wipe down the metal surfaces. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
  • Bulb Replacement: Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely before touching it. Screw in a new E26/Medium Base 60W MAX bulb.
  • Inspection: Periodically check the power cord and plug for any signs of damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

7. Troubleshooting

Problem Possible Cause Solution
Lamp does not turn on. 1. Lamp is unplugged.
2. Bulb is loose or burnt out.
3. Power outlet is not functioning.		 1. Ensure the lamp is securely plugged into a working outlet.
2. Tighten the bulb or replace it with a new one.
3. Test the outlet with another appliance or check your circuit breaker.
Lamp is wobbly. Pole sections are not fully tightened. Ensure all pole sections are screwed together tightly.
Light is too dim/bright. Incorrect bulb wattage or type. Replace the bulb with one that meets the recommended E26/Medium Base 60W MAX specification and provides your desired light output.

8. Specifications

Feature Detail
Model Number 67068
Brand Globe Electric
Product Dimensions 10"D x 10"W x 70"H (25.4 cm D x 25.4 cm W x 177.8 cm H)
Item Weight 8.38 pounds (3.8 kg)
Color Matte Brass
Material Metal
Finish Type Matte
Bulb Base E26 (Medium Base)
Max Wattage 60 Watts
Voltage 120 Volts
Switch Type In-Line Foot Switch
Power Source Corded Electric
Cord Length 5 feet (approximate)
Indoor/Outdoor Use Indoor Use Only
Included Components Floor Lamp, Instruction Sheet
Bulb Included? No (Sold Separately)

9. Warranty

This product is sold without a manufacturer's warranty. Please refer to your retailer's return policy for details on returns or exchanges.

10. Support

For additional assistance or inquiries, please visit the official Globe Electric website or contact their customer service department. Refer to the product packaging for specific contact details.

You can also visit the Globe Electric Store on Amazon for more information and products.