Onforu RGBW LED Flood Light Instruction Manual

Introduction

Thank you for choosing the Onforu RGBW LED Flood Light. This manual provides detailed instructions for the safe and efficient operation of your new flood light. Please read this manual thoroughly before installation and use, and retain it for future reference.

Image: Two Onforu RGBW LED Flood Lights and their remote controls.

Important Safety Instructions

• Ensure the power supply is disconnected before installation or maintenance.
• This product is rated IP66 waterproof for outdoor use, but avoid submerging it in water.
• Do not look directly into the light when it is on, as it is very bright and may cause eye strain.
• Install the light in a stable location where it will not fall or be easily damaged.
• Use only the provided remote control for operation.
• Keep the product away from flammable materials.
• Do not attempt to disassemble or modify the product. Refer all servicing to qualified personnel.

Package Contents

The package should contain the following items:

• Onforu 100W RGBW LED Flood Light (2 units)
• 44-Key IR Remote Control (2 units)
• Instruction Manual

Specifications

Image: Dimensions and adjustable bracket of the flood light.

Setup and Installation

The Onforu RGBW LED Flood Light is designed for easy installation. No complex wiring is required; simply plug it into a standard AC outlet.

1. Choose Location: Select a suitable location for your flood light, considering the desired lighting effect and proximity to a power outlet. The IP66 rating ensures suitability for outdoor environments, including rain, sleet, and snow.
2. Mounting: The light features a 180° adjustable lamp body and bracket. You can install it by mounting it to a surface or hanging it. Ensure the mounting surface is stable and can support the weight of the light.
3. Adjust Angle: Once mounted, adjust the angle of the flood light to direct illumination as needed.
4. Connect Power: Plug the power cord into a standard 120V AC power outlet.

Image: The flood light's IP66 waterproof design, suitable for outdoor use.

Operating Instructions

Your Onforu RGBW LED Flood Light is controlled by the included 44-key IR remote control. Ensure the remote is pointed towards the light for optimal response.

44-Key Remote Control Functions

Image: The 44-key IR remote control for the flood light.

• Power On/Off: Use the red power button to turn the light on or off.
• Brightness Adjustment: Use the brightness up/down arrows to adjust the intensity of the light.
• Color Selection: Choose from 20 preset colors directly using the color buttons.
• DIY Custom Color:
  • Press one of the "DIY1", "DIY2", or "DIY3" buttons to enter DIY mode.
  • Use the Red, Green, and Blue up/down arrows to increase or decrease the intensity of each primary color, creating your desired custom shade.
  • Press the same "DIY" button again to save the custom color.
• Dynamic Modes: Select from 6 color changing modes (FLASH, STROBE, FADE, SMOOTH, JUMP3, JUMP7) using the corresponding buttons.
  • Speed Adjustment: Use the "QUICK" and "SLOW" buttons to adjust the speed of the dynamic modes.
• Warm White (2700K): Press the "W" button for a dedicated 2700K warm white light.

Special Functions

• Timing Function: Use the "3H", "6H", or "8H" buttons to set the light to automatically turn off after 3, 6, or 8 hours, respectively.

  Image: Timer function for automatic operation.

• Memory Function: The light will remember the last color and mode setting when turned off and back on via the remote control.

Product Video Demonstration

Video: A demonstration of the Onforu RGB Flood Light features, including remote control, heat dissipation, LED beads, adjustable stand, durable body, plug-in operation, party dynamic modes, timing function, and IP66 waterproof rating.

Maintenance

• Before cleaning, ensure the flood light is unplugged from the power source.
• Wipe the surface of the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Regularly check the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
• Ensure the mounting screws remain tight, especially if the light is exposed to vibrations or strong winds.

Troubleshooting

Warranty and Support

Onforu products come with a standard warranty. For specific warranty details, returns, or technical support, please refer to the product packaging or contact Onforu customer service directly.

You can visit the official Onforu store for more information and support: Onforu Amazon Store