Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hykolity 4FT LED Commercial Wraparound Light. This low-profile fixture is designed to deliver efficient and bright illumination for various commercial and office environments. Please read this manual thoroughly before installation and retain it for future reference.
Image: Hykolity 4FT LED Commercial Wraparound Light showcasing its features including 60W power, 6000 lumens, 5000K daylight color temperature, 120-degree beam angle, and a 5-year warranty.
Safety Information
WARNING: To prevent electric shock and/or damage to the product, always turn off the power at the circuit breaker or fuse box before attempting any installation, maintenance, or cleaning procedures. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are secure and comply with local electrical codes and ordinances.
- Do not install this fixture on a dimmable circuit unless explicitly stated as dimmable.
- Do not handle the fixture with wet hands.
- Do not modify the fixture in any way.
- Consult a qualified electrician if you are unsure about any part of the installation process.
Package Contents
Carefully unpack the fixture and check that all components are present and undamaged. If any parts are missing or damaged, contact Hykolity customer service before proceeding with installation.
- 1x LED Wraparound Light Fixture
- 1x Pre-wiring quick connector
- 2x Wiring Nuts
- 4x Threading Screws
- 4x Anchors
Image: Diagram showing the dimensions of the 4FT LED fixture (47.64 in L x 9.96 in W x 2.95 in H) and included accessories: 1x pre-wiring quick connector, 2x wiring nuts, 4x threading screws, and 4x anchors.
Specifications
| Brand | Hykolity |
| Model Number | B07JGCWLGV |
| Wattage | 60 Watts |
| Lumen Output | 6000 Lumens |
| Color Temperature | 5000K Daylight White |
| Voltage | 100-277 Volts |
| Light Source | Integrated LED |
| Mounting Type | Flushmount |
| Beam Angle | 120 Degrees |
| Dimensions (L x W x H) | 47.64 in x 9.96 in x 2.95 in |
| Warranty | 5 Years |
Installation Instructions
IMPORTANT: Ensure power is turned off at the circuit breaker before beginning installation.
- Separating the Diffuser from the Housing: Gently separate the diffuser (B) from the fixture housing (A). This usually involves releasing clips or sliding mechanisms.
- Marking the Mounting Location: Hold the fixture housing (A) against the ceiling in the desired mounting location. Mark the positions for the keyslot holes and knock-out holes using a pencil.
- Making the Electrical Connections: Connect the hot (black) and neutral (white) wires from the housing (A) to the corresponding color wires from the electrical box using the provided wiring nuts or quick connector. Connect the green ground wire from the housing (A) to the grounding wire from the electrical box. Ensure all connections are secure.
- Attaching the Housing to the Ceiling: Drill 1/8 inch pilot holes in the marked locations. Install drywall anchors (FF) if needed. Align the keyslot holes on the housing (A) with the drilled holes. Secure the housing to the ceiling using the threading screws (GG). Slide the housing to engage the narrow ends of the keyslots for a firm attachment.
- Installing the Lens:
Image: Detailed steps for lens installation. Step 1: Squeeze the lens and slip it into the fixture body near the fixing cap. Step 2: Push the lens into place on the other end. Step 3: Fix the lens firmly with the fixing cap.
- Squeeze the lens slightly and slip one end into the fixture body, close to the end with the fixing cap.
- Gently push the other end of the lens into place until it is fully seated within the fixture.
- Secure the lens firmly using the fixing cap.
- Attaching the Diffuser to the Housing: Carefully reattach the diffuser (B) to the mounted housing (A), ensuring it clicks securely into place.
Image: Visual guide for the installation process, including separating the diffuser, marking locations, electrical connections, attaching the housing, and reattaching the diffuser.
Operating Instructions
After successful installation, restore power to the circuit at the breaker. The Hykolity 4FT LED Commercial Wraparound Light will illuminate. The fixture is typically controlled by a standard wall switch connected to the electrical circuit. While the product specifications mention a 'Remote' control method, this fixture primarily operates via standard electrical switching unless a separate remote control system is integrated into your electrical setup.
Maintenance
Regular maintenance ensures optimal performance and longevity of your LED fixture.
- Cleaning: Always turn off power at the circuit breaker before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for long life and does not require replacement.
Troubleshooting
If you encounter issues with your fixture, refer to the following common troubleshooting steps:
- Light does not turn on:
- Check that the power supply to the fixture is active.
- Verify the circuit breaker is in the 'ON' position.
- Ensure all wiring connections are secure and correctly made.
- Light flickers or dims:
- Confirm stable power supply to the circuit.
- Check for loose wiring connections.
- Ensure the fixture is not connected to an incompatible dimmer switch.
- Light is not bright enough:
- Verify the fixture is clean and free of dust or debris on the diffuser.
- Confirm the power supply voltage is within the specified range (100-277V).
If these steps do not resolve the issue, contact Hykolity customer support.
Warranty & Support
This Hykolity 4FT LED Commercial Wraparound Light is covered by a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact Hykolity customer service. Please have your model number (B07JGCWLGV) and proof of purchase available when contacting support.
Application Examples
Image: Example of the Hykolity LED wraparound light installed in a garage, providing bright illumination.
Image: Example of the Hykolity LED wraparound light installed in an office or workshop setting, demonstrating its wide application.