1. Introduction
Thank you for choosing the BERNSTEIN Freestanding Bathtub Faucet Model 8028B. This manual provides essential information for the safe installation, operation, and maintenance of your new faucet. Please read these instructions carefully before installation and retain them for future reference.
This freestanding faucet is designed for use with bathtubs, offering both bath filling and a hand shower function. It features a high-quality ceramic cartridge for reliable performance and is suitable for use with gas water heaters.
Image 1.1: BERNSTEIN 8028B freestanding bathtub faucet in black, installed beside a modern white bathtub.
2. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are properly sealed to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the faucet's surface, as this may damage the finish.
- Keep small parts out of reach of children.
3. Package Contents
Please verify that all components are present before starting the installation:
- Freestanding Bathtub Faucet (Model 8028B, black finish)
- High-quality replaceable ceramic cartridge (pre-installed)
- Shower hose (1.50 m length)
- Hand shower
- Mounting hardware and seals
- Instruction Manual
Image 3.1: The black hand shower and its flexible hose, part of the faucet assembly.
4. Installation and Setup
Professional installation is recommended for this product. Ensure you have all necessary tools and materials before proceeding.
4.1 Pre-Installation Checks
- Verify that the floor is level and capable of supporting the weight of the faucet and water connections.
- Ensure that hot and cold water supply lines are accessible and correctly positioned for connection.
- Flush the water lines to remove any debris before connecting the faucet.
4.2 Mounting the Faucet
- Position the faucet base on the desired location on the floor. Mark the drilling points for the mounting hardware.
- Drill holes according to the marked points.
- Secure the faucet base to the floor using the provided mounting hardware. Ensure it is stable and level.
4.3 Connecting Water Supply
- Connect the hot and cold water supply lines to the corresponding inlets on the faucet. Use appropriate sealing tape or compound to ensure watertight connections.
- Tighten all connections securely, but do not overtighten.
4.4 Final Checks
- Slowly turn on the main water supply.
- Check all connections for leaks. If leaks are detected, turn off the water supply and re-tighten the connections.
- Test the faucet and hand shower functions.
Image 4.1: Detailed view of the mixer handle and the diverter for bath and shower functions.
5. Operation
5.1 Water Flow and Temperature Control
The faucet features a single lever handle for controlling both water flow and temperature. Move the handle up to increase flow and down to decrease flow. Move the handle left for hot water and right for cold water.
Image 5.1: Water flowing from the main spout into the bathtub.
5.2 Switching Between Bath and Shower
To switch between the main bath spout and the hand shower, use the diverter knob located on the faucet body. Turn the knob to direct water flow to your desired outlet.
Image 5.2: Using the hand shower function of the faucet.
6. Maintenance and Care
6.1 Cleaning
To maintain the finish of your faucet, clean it regularly with a soft cloth and mild soap. Rinse thoroughly with water and dry with a soft cloth. Avoid using abrasive cleaners, scouring pads, or chemical solvents, as these can damage the surface.
6.2 Ceramic Cartridge
The faucet is equipped with a high-quality ceramic cartridge designed for durability. If you experience persistent dripping or difficulty controlling water flow/temperature, the ceramic cartridge may need to be replaced. Consult a professional for cartridge replacement.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or supply lines. | Clean or replace the aerator. Check and flush supply lines. |
| Leaking from Spout | Worn ceramic cartridge. | Replace the ceramic cartridge. |
| Leaking at Connections | Loose connections or damaged seals. | Tighten connections. Replace seals if damaged. |
| Difficulty Switching Functions | Diverter mechanism issue. | Inspect diverter for obstructions. If problem persists, professional service may be required. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 8028B |
| Brand | BERNSTEIN |
| Color | Black |
| Material | Brass (faucet body), Ceramic (cartridge) |
| Number of Handles | 1 (single lever) |
| Shower Hose Length | 1.50 m |
| Compatibility | Suitable for gas water heaters |
Image 8.1: Dimensional drawing of the faucet, indicating key measurements.
9. Warranty and Support
BERNSTEIN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official BERNSTEIN website or contact customer service.
BERNSTEIN Badshop: Visit Store
