Product Overview
The Laica Home Water Filter and Jug Kit provides a convenient solution for filtered water at home. This kit includes a Stream Line filter jug and a total of 13 Laica bi-flux filters, offering up to 13 months of filtered water. The bi-flux filters are designed to improve water taste and reduce substances such as chlorine, trihalomethanes, certain heavy metals, herbicides, and pesticides that may be present in drinking water. Both the jug and filters are manufactured in Italy and comply with Ministerial Decree 25/2012 of the Ministry of Health.
Image: The Laica Stream Line filter jug shown with 12 additional bi-flux filters, highlighting the complete kit.
Key Features
- Convenient Kit: Includes 1 filter jug and 12 additional filters, plus 1 free filter, for a total of 13 filters.
- Improved Water Taste: Filters are designed to eliminate chlorine, heavy metals, and other undesirable substances from tap water.
- Italian Made: Both the jug and filters are 100% manufactured in Italy.
- Space-Saving: Provides 13 months of filtered water conveniently, requiring minimal storage space.
Image: Visual representation of the Laica filter jug's benefits, including impurity removal, mineral preservation, improved taste, ease of transport, and reduction of single-use plastic bottles.
Setup and First Use
- Unpack Components: Carefully remove the filter jug and all filters from their packaging.
- Wash the Jug: Wash all parts of the jug (except the filter) with warm soapy water. Rinse thoroughly with clean water. Do not wash the filter with soap.
- Prepare the Filter: Submerge a new Laica bi-flux filter in cold water for approximately 15 minutes to remove any air bubbles. This primes the filter for optimal performance.
- Insert the Filter: Firmly insert the prepared filter into the designated compartment within the jug's funnel. Ensure it is seated correctly to prevent unfiltered water from bypassing the filter.
- Initial Filtration: Fill the jug with tap water. Discard the first two filtered batches of water. This helps to flush out any loose carbon particles from the new filter.
- Set Filter Indicator: If your jug has a filter life indicator (manual or electronic), set it according to the instructions to track filter usage.
Image: A Laica filter jug being filled with water from a tap, demonstrating the "Quick-Fill" automatic flap for easy refilling. The jug has a total capacity of 2.3 liters and a filtered water capacity of 1.2 liters.
Operating Instructions
Using your Laica filter jug is straightforward:
- Filling: Open the lid or use the "Quick-Fill" automatic flap to pour tap water into the funnel. The water will slowly filter through the bi-flux cartridge into the main reservoir.
- Pouring: Once the water has filtered, it is ready for consumption. Pour from the spout as you would with any jug.
- Storage: Store the filtered water in the refrigerator for best taste and to maintain freshness. The compact design allows it to fit conveniently in most refrigerator doors.
Image: The Laica filter jug placed inside a refrigerator door, illustrating its compact dimensions designed for convenient storage.
Maintenance and Filter Replacement
Regular maintenance ensures optimal performance and longevity of your Laica filter jug.
- Cleaning the Jug: Wash the jug (excluding the filter) regularly with warm soapy water and rinse thoroughly. It is recommended to clean the jug every time you replace the filter.
- Filter Life: Each Laica bi-flux filter is designed to filter approximately 150 liters of water or last for about 30 days, whichever comes first.
- Filter Replacement: When the filter indicator signals replacement, or after 30 days/150 liters, discard the old filter and replace it with a new one following the "Prepare the Filter" and "Insert the Filter" steps from the Setup section.
- Reset Indicator: After replacing the filter, reset the filter life indicator on the jug.
Image: A close-up of the Laica filter jug's electronic filter replacement indicator, showing percentage levels (100%, 75%, 50%, 25%) to signal when it's time to replace the filter for optimal performance and water quality.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow filtration rate | Filter is clogged or nearing end of life. Air bubbles trapped in filter. | Replace the filter. Re-prime the filter by submerging it in water to release air bubbles. |
| Water taste not improved | Filter not properly seated. Filter has expired. | Ensure filter is firmly inserted. Replace the filter. |
| Filter indicator not working | Battery low (if electronic). Not reset after filter change. | Check/replace battery. Reset the indicator button. |
Specifications
- Brand: Laica
- Model Name: J9074A1
- Special Feature: Chlorine Reduction
- Package Information: Jug
- Installation Type: Countertop / Portable
- Power Source: Manual Operation / Gravity-fed
- Upper Temperature Rating: 20 Degrees Celsius
- Product Dimensions: 12.13 x 9.69 x 12.44 inches
- Item Weight: 6.12 pounds
- Manufacturer: Laica
- Date First Available: March 14, 2019
Image: The Laica bi-flux filter, illustrating its capability to reduce substances such as heavy metals, chlorine, chlorinated organic solvents, chemical contaminants, certain chlorinated pesticides and herbicides, and trihalomethanes.
Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the official Laica website or contact their customer service directly. Specific warranty details are typically provided with the product packaging or available online.
Manufacturer: Laica
Model: J9074A1
For further assistance, please visit the Laica official website.
