1. Product Overview
The BORUIT RJ-3000 is a versatile and durable rechargeable LED headlamp designed for various outdoor and indoor activities. It features multiple lighting modes, including a red light option, and is built to withstand challenging environments.
Image 1.1: The BORUIT RJ-3000 headlamp shown with its included accessories: two rechargeable batteries, a wall charger, a car charger, and a USB-C cable.
Key Features:
- Multiple Light Modes: Offers high white light (100%), medium white light (50%), and medium-colored light (50% red).
- Rechargeable: Equipped with USB-C charging for efficient power replenishment. Can also function as an emergency power bank.
- Adjustable Design: Features a 90° tilt adjustment for directing light precisely.
- Durable & Weather-Resistant: Constructed with a rugged aluminum alloy body and rated IPX5 waterproof, suitable for demanding conditions.
2. Package Contents
Ensure all items are present upon unboxing:
- BORUIT RJ-3000 Headlamp
- 2 x Rechargeable Batteries
- USB-C Charging Cable
- Wall Charger
- Car Charger
3. Setup
3.1 Battery Installation
- Locate the battery compartment at the rear of the headlamp.
- Open the compartment cover.
- Insert the two provided rechargeable batteries, ensuring correct polarity (+/-).
- Securely close the battery compartment cover.
Video 3.1: This video demonstrates the installation of the two rechargeable batteries into the headlamp's battery compartment and shows the charging process via the USB-C port.
3.2 Initial Charging
Before first use, fully charge the headlamp batteries.
- Connect the USB-C charging cable to the headlamp's charging port.
- Connect the other end of the cable to the provided wall charger or car charger, then plug into a power source.
- The charging indicator will illuminate (typically red) during charging and change color (e.g., green) when fully charged.
4. Operating Instructions
4.1 Power On/Off and Mode Selection
The headlamp features a non-slip switch button for control.
- Power On: Press the power button once to turn on the headlamp.
- Cycle Modes: Subsequent presses of the power button will cycle through the available light modes: High White Light (100%) → Medium White Light (50%) → Medium Red Light (50%).
- Power Off: Press the power button after cycling through all modes, or hold the button for a few seconds to turn off directly from any mode.
Image 4.1: A detailed view of the headlamp's non-slip switch button and visual examples of its three primary light modes: high white, low white, and red light.
Image 4.2: The headlamp operating in red light mode, illustrating its utility for activities such as beekeeping, fishing, and hunting, where preserving night vision or minimizing disturbance is crucial.
4.2 Angle Adjustment
The headlamp unit can be tilted up to 90 degrees to direct the light beam.
- Gently hold the headlamp unit.
- Tilt it to the desired angle. The mechanism is designed to hold its position securely.
Image 4.3: A visual representation of the headlamp's 90-degree rotation capability, demonstrating how the light can be angled for various user needs, such as walking, running, or cycling.
5. Maintenance
5.1 Cleaning
- Wipe the headlamp body with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
- Ensure the charging port cover is securely closed to prevent water ingress during cleaning.
5.2 Storage
- Store the headlamp in a cool, dry place when not in use.
- For long-term storage, it is recommended to partially charge the batteries (around 50%) and recharge them every 3-6 months to maintain battery health.
Image 5.1: The headlamp undergoing a water spray test, confirming its IPX4 waterproof rating, which protects against splashes from any direction.
6. Troubleshooting
- Headlamp does not turn on:
- Check if the batteries are correctly installed with the right polarity.
- Ensure the batteries are charged. Connect to a power source and observe the charging indicator.
- Verify that the battery compartment cover is fully closed.
- Light output is dim:
- The batteries may be low. Recharge the headlamp.
- Ensure the lens is clean and free from dirt or debris.
- Headlamp does not charge:
- Check the USB-C cable and charger for damage. Try a different cable or power adapter.
- Ensure the charging cable is fully inserted into the headlamp's port.
7. Specifications
| Feature | Specification |
|---|---|
| Model | RJ-3000 |
| Light Source Type | LED |
| Material | Aluminum Alloy |
| Color | Red (This specific model) |
| White Brightness | Up to 5000 Lumens |
| Color Temperature | 6500 Kelvin |
| Power Source | Battery Powered (2 x A batteries included) |
| Battery Cell Composition | Lithium Ion |
| Voltage | 3.7 Volts |
| Water Resistance Level | IPX5 Waterproof |
| Item Weight | 280 Grams (approx. 9.9 ounces) |
| Product Dimensions | 4.72 x 3.94 x 3.94 inches |
| Special Features | Adjustable Focus, Adjustable Light Modes, Adjustable Strap, High Power, Rechargeable |
8. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact BORUIT customer service directly. Contact details are typically available on the official BORUIT website or through your point of purchase.
