Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 36-inch Under Cabinet LED Light Bar. Please read this manual thoroughly before installation and keep it for future reference. This LED light bar is designed to provide efficient and warm white illumination for your indoor spaces, particularly under cabinets.
Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Always disconnect power at the circuit breaker before installation, servicing, or cleaning.
- This product is intended for indoor use only. Do not expose to water or moisture.
- Ensure all electrical connections comply with local codes and ordinances. If you are unsure, consult a qualified electrician.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- Avoid looking directly into the LED light source when it is illuminated, as it may cause eye strain.
- Keep packaging materials out of reach of children.
Package Contents
Verify that all components are present before beginning installation:
- Utilitech 36-inch Under Cabinet LED Light Bar (1)
- Remote Control (1)
- Mounting Hardware (screws, anchors)
- Instruction Manual (this document)
Image: The Utilitech 36-inch Under Cabinet LED Light Bar, showing its slim profile and white finish.
Setup and Installation
The Utilitech LED Light Bar is designed for semi-flush under-cabinet mounting. Follow these steps for proper installation:
- Prepare the Installation Area: Choose a suitable location under a cabinet. Ensure there is a power outlet nearby for the corded electric connection. Clean the mounting surface.
- Mark Mounting Points: Hold the light bar in the desired position and mark the locations for the mounting screws. Use a pencil to mark through the mounting holes on the fixture.
- Drill Pilot Holes: Using an appropriate drill bit for your cabinet material, drill pilot holes at the marked locations. If mounting into drywall, use the provided wall anchors.
- Secure the Light Bar: Align the light bar with the pilot holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached and level.
- Connect to Power: Plug the light bar's power cord into a standard 110-volt electrical outlet.
Note: For a clean installation, consider routing the power cord discreetly using cable clips (not included) or by drilling a small hole through the cabinet if permissible and safe.
Operating Instructions
Your Utilitech LED Light Bar is controlled via the included remote control.
- Power On/Off: Press the ON button on the remote to turn the light bar on. Press the OFF button to turn it off.
- Brightness Adjustment: Use the + and - buttons on the remote to increase or decrease the brightness of the light. The light bar provides up to 800 lumens of warm white light.
- Remote Control Range: Ensure the remote control is pointed towards the light bar for optimal signal reception. The effective range may vary depending on obstacles.
Maintenance
The Utilitech LED Light Bar requires minimal maintenance.
- Cleaning: Before cleaning, ensure the light bar is unplugged from the power outlet. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as they may damage the finish.
- LED Light Source: The LED light source is integrated and non-removable. It is designed for long-lasting performance and does not require bulb replacement.
Troubleshooting
If you encounter issues with your light bar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light bar does not turn on. |
|
|
| Light is dim or flickers. |
|
|
| Remote control not responding. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Utilitech |
| Model Number | 38971 |
| Product Dimensions | 36.5 x 3.25 x 1.5 inches |
| Item Weight | 2.2 pounds |
| Power Source | Corded Electric |
| Voltage | 110 Volts |
| Wattage | 9.21 watts |
| Brightness | 800 lumen |
| Light Color | Warm White |
| Light Source Type | LED (Non-Removable) |
| Control Method | Remote Control |
| Installation Type | Semi Flush Mount / Under Cabinet |
| Indoor/Outdoor Usage | Indoor |
| Finish Type | Brushed |
| Shade Material | Metal |
| Assembly Required | No |
Warranty Information
This Utilitech product comes with a limited warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.
Manufacturer: Utilitech
