VASAGLE Computer Desk Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your new VASAGLE Computer Desk, Model VSG-LWD40X. This industrial-style desk features a vintage brown tabletop and a black steel frame, designed for stability and ease of use in your home or office.

Please read these instructions carefully before beginning assembly to ensure correct setup and safe use of the product. Keep this manual for future reference.

Figure 1: VASAGLE Computer Desk (Model VSG-LWD40X)

2. Safety Information

• Children Safety: For safety reasons, children should not climb or play on the product.
• Heat and Water: Keep the product away from heat sources and water to prevent damage.
• Load Capacity: Do not exceed the static load capacity of 50 kg (110 lbs) to ensure stability and prevent structural failure.
• Stable Surface: Always place the desk on a flat and stable surface. Use the adjustable feet to compensate for uneven floors.
• Assembly: Ensure all screws and fasteners are securely tightened before using the desk. Periodically check and re-tighten as necessary.

3. Package Contents

Before assembly, verify that all components listed below are present in your package:

• 1 x Computer Desk (Tabletop and Frame Components)
• 1 x Assembly Tool Kit (includes necessary wrenches/screwdrivers)
• 1 x Instruction Manual (this document)
• 1 x Accessory Bag (containing screws, bolts, and adjustable feet)

4. Setup and Assembly Instructions

The VASAGLE Computer Desk is designed for easy assembly. The side frames are provided in a single piece to simplify the process. Follow these general steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
2. Identify Parts: Refer to the included parts list in the accessory bag to identify each component (e.g., tabletop, side frames, crossbars, screws).
3. Attach Side Frames: Connect the pre-assembled side frames to the crossbars using the provided screws. Ensure all connections are finger-tight at this stage.
4. Secure Tabletop: Place the tabletop onto the assembled frame. Align the pre-drilled holes on the tabletop with the frame and secure it using the appropriate screws.
5. Tighten All Fasteners: Once all components are in place, systematically tighten all screws and bolts using the provided assembly tool. Do not overtighten.
6. Install Adjustable Feet: Screw the adjustable feet into the bottom of the desk legs.
7. Level the Desk: Place the desk in its desired location. Adjust the height of each foot individually by rotating them until the desk is stable and level on the floor.

Figure 2: Adjustable Feet for Leveling

5. Operating Instructions

Your VASAGLE Computer Desk is designed as a stable and functional workspace. No complex operation is required.

• Placement: Position the desk in your desired study or office area. Ensure adequate space for movement and access to power outlets if using electronic devices.
• Workspace: Utilize the spacious tabletop for your computer, books, printer, and other work essentials. The desk's robust construction supports the necessary supplies for your daily tasks.
• Stability Check: Periodically check the desk's stability. If any wobbling occurs, re-adjust the leveling feet as described in the assembly section.

Figure 3: Desk in use as a computer workstation

6. Maintenance

Proper care will extend the life and appearance of your desk:

• Cleaning: Wipe the desk surface with a dry cloth for general dusting. For more thorough cleaning, use a damp cloth and mild detergent, then immediately dry with a clean cloth.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solvents, as these can damage the finish.
• Liquid Spills: Promptly wipe up any liquid spills to prevent staining or damage to the tabletop.
• Fastener Check: Regularly inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.

7. Troubleshooting

If you encounter any issues with your VASAGLE Computer Desk, consider the following:

• Desk Wobbles: Ensure the desk is on a flat surface. Adjust the individual leveling feet until the desk is stable. Check that all assembly screws are securely tightened.
• Parts Missing/Damaged: If any parts were missing or damaged upon arrival, please contact VASAGLE customer support for assistance.
• Assembly Difficulties: Review the assembly instructions carefully. If you are still experiencing difficulties, consider seeking assistance from another person.

8. Specifications

Figure 4: Product Dimensions

9. Warranty and Support

For any questions, concerns, or support needs regarding your VASAGLE Computer Desk, please contact the manufacturer directly. Refer to the packaging or the official VASAGLE website for specific warranty details and customer service contact information.

Please have your model number (VSG-LWD40X) and purchase information ready when contacting support.