1. Product Overview
This manual provides essential information for the Hatco R02.30.265.12 Light Bulb, a 40W, 130V incandescent bulb designed for various applications. This product is a genuine OEM replacement part from Hatco, ensuring compatibility and performance.
An image of the Hatco R02.30.265.12 incandescent light bulb, featuring a clear glass envelope and a standard screw-in base.
2. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 6 x 6 x 9 inches; 1.6 ounces |
| Item Model Number | R02.30.265.12 |
| Manufacturer | Hatco |
| Brand | Hatco |
| Special Feature | Energy Efficient |
| Wattage | 40 watts |
| Voltage | 130 Volts |
| Unit Count | 1 Count |
3. Setup
Before installing the light bulb, ensure that the power supply to the fixture is turned off at the circuit breaker or switch. Carefully screw the Hatco R02.30.265.12 Light Bulb into a compatible E26 standard screw-in base fixture. Turn clockwise until snug, but do not overtighten, as this can damage the bulb or the fixture socket.
4. Operating Instructions
Once the bulb is securely installed, restore power to the fixture. The bulb will illuminate when the light switch is turned to the 'ON' position. To turn off the light, simply flip the switch to the 'OFF' position. Allow the bulb to cool before handling after extended use.
5. Maintenance
The Hatco R02.30.265.12 Light Bulb requires minimal maintenance. Periodically inspect the bulb for any visible damage, such as cracks in the glass or a broken filament. Ensure the fixture and bulb are free from dust and debris, which can affect light output and heat dissipation. Always turn off the power before cleaning or inspecting the bulb.
6. Troubleshooting
- Bulb does not light up:
- Verify that the power supply to the fixture is active.
- Ensure the bulb is screwed in tightly and making proper contact with the socket.
- Test the fixture with a known working bulb to rule out a fixture issue.
- If the bulb is old, it may have reached the end of its lifespan and needs replacement.
- Bulb flickers:
- Check for loose connections in the fixture or the bulb itself.
- Ensure the bulb is fully tightened in the socket.
- Flickering can sometimes indicate an unstable power supply or a faulty dimmer switch (if applicable).
- If flickering persists, replace the bulb.
7. Warranty and Support
For information regarding the warranty of your Hatco R02.30.265.12 Light Bulb, please refer to the documentation provided at the time of purchase or contact Hatco customer service directly. Hatco is committed to providing quality products and support. For technical assistance or further inquiries, please visit the official Hatco website or contact their support team using the contact information provided with your product.
