Brock Electronics BMS-2001-BK Electric Shaver

1. Introduction

Thank you for choosing the Brock Electronics BMS-2001-BK Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new shaver. Please read it thoroughly before first use and keep it for future reference.

An image showing the Brock Electronics BMS-2001-BK electric shaver. It features a sleek black and silver design with three rotary shaving heads visible at the top. Below the heads, there's a power button and indicators for 'WORK' and 'CHARGE'. The brand 'BROCK Electronics' is visible at the bottom.

The Brock Electronics BMS-2001-BK is an advanced electric shaver designed for men, featuring a triple-head system with a double lifting mechanism for a close and comfortable shave. It supports both dry and wet shaving and includes a convenient pop-up trimmer for precise detailing.

2. Important Safety Instructions

To reduce the risk of burns, electrocution, fire, or injury to persons, please observe the following safety precautions:

• Do not immerse the charging adapter in water or other liquids.
• Always unplug the shaver from the power outlet immediately after charging and before cleaning.
• Do not use the shaver while bathing or in the shower if it is connected to the charging adapter.
• Keep the charging adapter away from heated surfaces.
• Do not operate the shaver with a damaged cord or plug, or if it malfunctions or has been dropped or damaged.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use this product only for its intended household use as described in this manual.
• Do not use attachments not recommended by the manufacturer.
• Never drop or insert any object into any opening.
• Store the shaver in a dry place.

3. Package Contents

Please check the package for the following items:

• Brock Electronics BMS-2001-BK Electric Shaver
• Protective Cap
• Cleaning Brush
• Charging Adapter
• User Manual (this document)

4. Product Features

• Triple Head System: Equipped with three independent rotary shaving heads for maximum coverage and flexibility.
• Double Lifting System: Designed to lift hairs for a closer, more efficient shave.
• Wet & Dry Operation: Suitable for comfortable dry shaving or refreshing wet shaving with foam or gel.
• Pop-up Trimmer: Integrated trimmer for precise sideburns, mustache, and beard detailing.
• Long Operating Time: Provides up to 80 minutes of cordless shaving on a full charge.
• Rechargeable Battery: Convenient cordless operation with a built-in rechargeable battery.

5. Setup

5.1 Initial Charging

1. Before first use, fully charge the shaver for approximately 8 hours.
2. Ensure the shaver is switched OFF.
3. Connect the charging adapter to the shaver's charging port.
4. Plug the adapter into a suitable electrical outlet. The "CHARGE" indicator light will illuminate.
5. Once fully charged, unplug the adapter from the outlet and then from the shaver.

Note: For optimal battery life, allow the shaver to fully discharge before recharging, and avoid overcharging.

6. Operating Instructions

6.1 Shaving

1. Ensure your face is clean. For dry shaving, ensure your skin is completely dry. For wet shaving, apply shaving foam or gel.
2. Press the power button to turn the shaver ON. The "WORK" indicator light will illuminate.
3. Hold the shaver at a right angle (90 degrees) to your skin.
4. Move the shaver in small, circular motions against the direction of hair growth.
5. Apply gentle pressure; do not press too hard.
6. After shaving, press the power button again to turn the shaver OFF.

6.2 Using the Pop-up Trimmer

1. Locate the pop-up trimmer switch on the back of the shaver.
2. Slide the switch upwards to engage the trimmer.
3. Use the trimmer for shaping sideburns, mustaches, or for precise detailing.
4. After use, slide the switch downwards to retract the trimmer.

7. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your shaver.

7.1 Daily Cleaning (Dry Shaving)

1. Turn off the shaver and unplug it if connected to power.
2. Remove the shaving head assembly by gently pulling it upwards.
3. Use the provided cleaning brush to brush away hair clippings from the shaving heads and the hair chamber.
4. Do not use the brush on the foil parts, as this may damage them.
5. Replace the shaving head assembly.

7.2 Rinsing (Wet Shaving or Deep Clean)

1. Turn off the shaver and unplug it from the charging adapter.
2. Hold the shaver head under warm running water to rinse away foam or gel residue and hair clippings.
3. For a more thorough clean, you can remove the shaving head assembly and rinse it separately under running water.
4. Allow the shaver and head assembly to air dry completely before reattaching and storing.

7.3 Storage

Store the shaver in a cool, dry place, away from direct sunlight and extreme temperatures. Always use the protective cap when storing or traveling to protect the shaving heads.

8. Troubleshooting

9. Specifications

10. Warranty and Support

Brock Electronics is committed to providing high-quality products. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Brock Electronics website. Please retain your proof of purchase for any warranty claims.

For further assistance, you may contact Brock Electronics customer service through their official channels.