AirNmore Comfort Deluxe Copper PTC Infrared Space Heater User Manual

1. Introduction

Thank you for choosing the AirNmore Comfort Deluxe Copper PTC Infrared Space Heater. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heater. Please read all instructions carefully before use and retain this manual for future reference.

The AirNmore Comfort Deluxe heater is designed to provide supplemental warmth for indoor spaces, featuring Copper PTC heating elements for efficient heat transfer and safety features such as overheat protection.

2. Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is safe around children and pets due to its cool-to-the-touch exterior and no exposed heating elements. However, supervision is always recommended.

Image: The AirNmore Comfort Deluxe heater positioned safely near a pet, highlighting its cool-to-the-touch exterior.

3. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

• AirNmore Comfort Deluxe Space Heater (Model YD-903G-CDA)
• Remote Control
• User Manual (This document)

4. Product Overview

The AirNmore Comfort Deluxe heater utilizes Copper PTC (Positive Temperature Coefficient) technology to provide efficient and consistent infrared heat. It is designed for indoor use and features a cabinet form factor with integrated wheels for easy mobility.

Image: Front view of the AirNmore Comfort Deluxe heater, showcasing the control panel and included remote control.

Control Panel and Display

The heater features an intuitive control panel on the front, allowing for easy adjustment of settings. A remote control is also included for convenience.

Image: Detailed view of the heater's control panel, showing buttons for temperature adjustment, power, and high/low settings, along with the remote control.

• POWER Button: Turns the heater ON or OFF.
• TEMP UP / TEMP DOWN Buttons: Adjusts the desired temperature setting. The display shows the set temperature range from 40°F to 90°F.
• HIGH / LOW Buttons: Selects between high (1500W) and low (750W) heat output modes.
• Digital Display: Indicates the current temperature setting.

5. Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage or future transport.
2. Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the front, sides, and rear of the heater to prevent obstruction of air flow and to keep combustible materials away. Do not place the heater directly under a power outlet.
3. Power Connection: Plug the heater directly into a 120V, 15 Amp (or greater) grounded wall outlet. Do not use extension cords, power strips, or surge protectors. The heater is equipped with a heavy-duty power cord.

Image: Rear view detail showing the power cord neatly stored and the air filter access.

Ensure the power cord is not pinched or placed in a position where it could be damaged or cause a tripping hazard.

6. Operating Instructions

1. Power On: Press the POWER button on the control panel or remote control to turn the heater ON. The display will illuminate, showing the current room temperature or default setting.
2. Set Temperature: Use the TEMP UP or TEMP DOWN buttons to set your desired temperature. The heater will cycle ON and OFF to maintain this temperature. The adjustable range is typically 40°F to 90°F.
3. Select Heat Mode: Press the HIGH or LOW button to select the desired heat output.
   • HIGH: 1500 Watts for maximum heat output.
   • LOW: 750 Watts for reduced heat output and energy consumption.
4. Remote Control: The included remote control duplicates the functions of the control panel for convenient operation from a distance. Ensure the remote has working batteries.
5. Power Off: Press the POWER button again to turn the heater OFF. The fan may continue to run for a short period to cool down internal components before shutting off completely.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your heater. Always unplug the heater before performing any maintenance.

Cleaning the Air Filter

The AirNmore Comfort Deluxe heater is equipped with a washable air filter located at the rear of the unit. It is recommended to clean the filter every two weeks or more frequently depending on usage and air quality.

1. Ensure the heater is unplugged and cool to the touch.
2. Locate the filter cover on the back of the unit.
3. Remove the filter cover and gently pull out the air filter.
4. Rinse the filter under warm running water until clean. A mild detergent can be used if necessary.
5. Allow the filter to air dry completely before reinserting it into the heater. Do not use the heater without a dry filter.

Image: Rear view of the heater, indicating the location of the removable air filter for cleaning.

General Cleaning

• Wipe the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Do not immerse the heater in water.

Storage

When storing the heater, keep it in a cool, dry place. If possible, use the original packaging to protect it from dust and damage.

8. Troubleshooting

If your heater is not operating correctly, please refer to the following common issues and solutions:

If the problem persists after trying these solutions, please contact AirNmore customer support.

9. Specifications

Image: Dimensions of the AirNmore Comfort Deluxe heater: 16.5"D x 13"W x 16.75"H.

10. Warranty and Support

Warranty Information

The AirNmore Comfort Deluxe heater comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage resulting from misuse, neglect, accident, alteration, or improper installation.

Customer Support

For technical assistance, warranty claims, or any questions regarding your AirNmore Comfort Deluxe heater, please contact AirNmore customer support. Refer to the product packaging or the official AirNmore website for current contact information.

When contacting support, please have your model number (YD-903G-CDA) and date of purchase readily available.