1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LSLYA Universal Car Radio Stereo Receiver. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.
2. Safety Information
- Do not operate the unit in a manner that distracts you from driving.
- Ensure all wiring is correctly connected to prevent short circuits or damage.
- Consult a professional for installation if you are unsure about the wiring process.
- Avoid exposing the unit to extreme temperatures, direct sunlight, or moisture.
- Do not attempt to disassemble or modify the unit. This will void the warranty.
3. Package Contents
Verify that all items are present in the package:
- LSLYA Car MP3 Player Unit
- User Manual
- ISO Cable
- Steering Wheel Control (SWC) Remote
- Removal Keys (2x)

Figure 3.1: Package Contents
4. Product Overview
4.1 Front Panel
The front panel features the main controls, display, and input ports.

Figure 4.1: Front Panel Layout
- Power/Mode Button: Press to turn on/off, short press to change mode (Radio, USB, SD, AUX, Bluetooth).
- Volume Knob: Rotate to adjust volume. Press to access EQ settings.
- Display: Shows current time, mode, frequency, and track information. Features 7-color backlight.
- USB Ports: Two USB ports. One for music playback, one for phone fast charging.
- SD/MMC Card Slot: For media playback.
- AUX Input: 3.5mm jack for external audio devices.
- Microphone: For hands-free calling.
- Navigation Buttons: For track skipping, station tuning, and menu navigation.
4.2 Rear Panel
The rear panel provides connections for power, speakers, antenna, and audio outputs.

Figure 4.2: Rear Panel Interface
- Radio Antenna Socket: Connects to your car's radio antenna.
- ISO Power Cable Connector: For main power and speaker connections.
- Audio Output (RCA): Four channels (Left/Right for Output 1 and Output 2) for connecting external amplifiers.
4.3 Steering Wheel Control (SWC) Remote
The included remote allows for convenient control of the unit from your steering wheel.

Figure 4.3: Steering Wheel Control Remote
5. Setup
5.1 Installation
The unit is a single DIN car stereo receiver. Ensure your vehicle's dashboard opening is compatible with single DIN dimensions.

Figure 5.1: Unit Dimensions
Mounting:
- Insert the metal mounting sleeve into the dashboard opening.
- Bend the tabs on the sleeve outwards to secure it.
- Slide the stereo unit into the mounting sleeve until it clicks into place.
5.2 Wiring Diagram
Proper wiring is crucial for the unit's functionality and to prevent damage. Refer to the diagram below for connections.

Figure 5.2: Wiring Connections
Power Connections:
- Yellow Wire (+12V Constant Power Supply): Connect to a constant +12V power source (B+).
- Red Wire (+12V Ignition Switch): Connect to the car's ignition switch (ACC) that provides +12V when the ignition is on.
- Black Wire (Ground Wire): Connect to a good chassis ground point.
- Blue Wire (Power Antenna / Amplifier Turn On): Connect to the power antenna or external amplifier remote turn-on lead.
Speaker Connections (4 Channels Output):
- White / White-Black: Front Left Speaker (+/-)
- Gray / Gray-Black: Front Right Speaker (+/-)
- Green / Green-Black: Rear Left Speaker (+/-)
- Purple / Purple-Black: Rear Right Speaker (+/-)
Caution: Ensure correct polarity for all speaker connections to avoid sound distortion or damage.

Figure 5.3: ISO Power Interface and AUX Input
6. Operating Instructions
6.1 Basic Functions
- Power On/Off: Press the power button (usually the volume knob) to turn the unit on or off.
- Volume Adjustment: Rotate the volume knob to increase or decrease the sound level.
- Mode Selection: Short press the power/mode button to cycle through available modes: FM Radio, USB, SD, AUX, Bluetooth.
6.2 FM Radio Operation
The unit features a high-sensitivity tuner supporting FM (87.5~108.0MHz) with 3 bands (FM1, FM2, FM3) and storage for 18 radio stations.

Figure 6.1: FM Radio Display and Antenna Socket
- Band Selection: In FM mode, press the BAND button to switch between FM1, FM2, and FM3.
- Automatic Scan: Press and hold the AMS button to automatically scan and store strong stations.
- Manual Tuning: Use the navigation buttons to fine-tune the frequency.
- Preset Stations: Short press number buttons (1-6) to select a stored station. Press and hold a number button to store the current station.
6.3 USB/SD Playback
Insert a USB drive or SD/MMC card into the respective slot. The unit supports MP3, WMA, and WAV formats.
- Automatic Playback: The unit will automatically switch to USB/SD mode and begin playback.
- Track Navigation: Use the navigation buttons to skip tracks.
- Folder Playback: The unit supports folder browsing. Refer to the user manual for specific button functions.
- ID3 Display: Displays track information (artist, title) if available.
6.4 Bluetooth Operation
The unit features built-in Bluetooth for hands-free calls and music streaming.
- Pairing:
- Ensure the unit is in Bluetooth mode.
- On your mobile device, search for Bluetooth devices and select
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.