1. Introduction
This manual provides instructions for the installation, operation, and maintenance of the GM Genuine Parts 22744827 Rear Side Door Window Switch. This component is designed to control the power to your vehicle's rear side windows. It is manufactured to meet original equipment standards for fit, form, and function.
2. Safety Information
Always observe the following safety precautions when working with automotive electrical components:
- Disconnect Battery: Before beginning any electrical work, disconnect the vehicle's negative battery terminal to prevent electrical shock or damage to the vehicle's electrical system.
- Professional Installation: If you are not experienced with automotive electrical systems, it is recommended to have this component installed by a qualified service technician.
- Proper Tools: Use appropriate tools for removal and installation to avoid damage to the switch or surrounding vehicle components.
- Component Integrity: Inspect the new switch for any visible damage before installation. Do not install a damaged component.
3. Setup and Installation
The GM Genuine Parts 22744827 window switch is designed for direct replacement in compatible GM vehicles. Installation typically involves removing the existing switch and connecting the new one.
3.1 Required Tools
- Flat-head screwdriver or trim removal tool
- Phillips head screwdriver (if applicable)
- Socket wrench (if applicable for battery terminal)
3.2 Installation Steps
- Prepare Vehicle: Ensure the vehicle is turned off and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery.
- Access Switch: Carefully remove the door panel or trim piece that houses the existing window switch. Use a trim removal tool to avoid scratching or damaging the interior.
- Disconnect Old Switch: Once the old switch is accessible, disconnect the electrical connector(s) by pressing the release tab and pulling gently. Remove any retaining clips or screws holding the switch in place.
- Install New Switch: Position the new GM Genuine Parts 22744827 switch into the opening. Ensure it seats correctly.
- Connect Electrical: Reconnect the electrical connector(s) to the new switch. Ensure the connection is secure.
- Secure Switch: Reinstall any retaining clips or screws that hold the switch in place.
- Reassemble: Carefully reattach the door panel or trim piece, ensuring all clips and fasteners are properly secured.
- Reconnect Battery: Reconnect the negative battery terminal.
- Test Functionality: Turn on the vehicle's ignition and test the operation of the new window switch to ensure proper function.
Image 1: Front view of the GM Genuine Parts 22744827 Rear Side Door Window Switch. This image displays the primary button for window control.
Image 2: Rear view of the GM Genuine Parts 22744827 Rear Side Door Window Switch. This view shows the electrical connector pins and part number for identification.
4. Operating Instructions
The GM Genuine Parts 22744827 Rear Side Door Window Switch operates manually to control the corresponding power window.
- To Lower the Window: Press the switch button down.
- To Raise the Window: Pull the switch button up.
- Release the button to stop the window at the desired position.
Ensure no obstructions are present in the window path during operation to prevent damage or injury.
5. Maintenance
The GM Genuine Parts 22744827 window switch is designed for long-term reliability and typically requires minimal maintenance.
- Cleaning: Keep the switch surface clean from dust and debris using a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the switch for any signs of wear, damage, or loose connections.
- Avoid Liquid Exposure: Prevent liquids from entering the switch mechanism, as this can cause electrical malfunction.
6. Troubleshooting
If the window switch does not function as expected, consider the following troubleshooting steps:
- No Window Movement:
- Check if the vehicle's ignition is on.
- Verify that the child safety lock (if equipped on the master switch) is not engaged.
- Inspect the electrical connector for a secure connection.
- Check the vehicle's fuse box for a blown fuse related to the power windows. Consult your vehicle's owner's manual for fuse locations.
- Intermittent Operation:
- Ensure the electrical connector is fully seated and free of corrosion.
- Inspect wiring for any signs of damage or fraying.
If these steps do not resolve the issue, professional diagnosis by a qualified technician is recommended.
7. Specifications
| Specification | Value |
|---|---|
| Brand | GM |
| Model Number | 22744827 |
| Operation Mode | Manual |
| Contact Type | Normally Open |
| Circuit Type | 1-way |
| Mounting Type | Door Mount |
| Contact Material | Metal |
| Control Method | Touch |
| Color | Black |
| Item Dimensions (L x W x H) | 3.1 x 2.3 x 1.6 inches |
| Item Weight | 1.6 ounces |
| Manufacturer | ACDelco |
| UPC | 808709730781 |
8. Warranty and Support
GM Genuine Parts are designed, engineered, and tested to rigorous standards and are backed by General Motors. For specific warranty details or technical support, please refer to the official GM Genuine Parts website or contact your authorized GM service center.
Image 3: An illustration of the GM Genuine Parts and ACDelco commitment to quality, featuring a range of automotive components.
Image 4: A service technician holding an ACDelco part box, emphasizing the importance of using genuine parts and professional installation.