1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DYNAVIN N7-MST Car Radio Navigation System. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
The DYNAVIN N7-MST is designed specifically for Ford Mustang models from 2010 to 2014, offering an integrated capacitive touchscreen display, navigation capabilities, and multimedia functions.
2. Product Features
- Capacitive touchscreen with anti-reflection display.
- High-resolution 9-inch / 16:9 LCD screen (1024 x 600 px).
- Integrated Canbus Solution.
- FM RDS TMC radio with DSP noise reduction and 15 memory presets.
- DSP sound processor with EQ, Time Correction, and 4V pre-out.
- AV Input/Output.
- CD / DVD Player.
- Parrot Bluetooth connection (external microphone included).
- USB/SD card slot.
- Rearview camera support (camera not included).
- DAB+ Ready, DVBT Ready.
- Made for iPhone, iPod, iPad.
- Navigation software with 3D view and premium POI.
- Android Link for direct control of supported apps via the radio.
- Freely assignable hardware function key.
3. Safety Information
Always operate the device responsibly. Distracted driving can lead to accidents. Ensure the device is securely installed and does not obstruct your view or interfere with vehicle controls. Do not attempt to disassemble or modify the unit. Refer all servicing to qualified personnel.
4. Setup and Installation
Installation of the DYNAVIN N7-MST system requires professional knowledge of car electronics and vehicle specific wiring. It is highly recommended that installation be performed by a certified technician.
4.1. Pre-Installation Checks
- Verify vehicle compatibility: Ford Mustang models, years 2010-2014.
- Ensure all components listed in the packing contents are present.
- Disconnect the vehicle's battery before beginning installation to prevent electrical shorts.
4.2. Wiring Diagram (Conceptual)
A detailed wiring diagram is typically provided with the product packaging. Below is a general overview of common connections:
- Power Connections: Constant 12V, Switched 12V (ACC), Ground.
- Speaker Outputs: Front Left/Right, Rear Left/Right.
- Antenna Connection: Radio antenna, GPS antenna.
- Auxiliary Inputs/Outputs: AV-in, AV-out, Camera-in.
- USB/SD Connections: For media playback and Android Link.
- CAN-Bus Connection: For vehicle integration (steering wheel controls, vehicle data).
- External Microphone: For Bluetooth hands-free calling.
4.3. Physical Installation
- Carefully remove the factory radio and trim panels from your Ford Mustang.
- Connect the main wiring harness from the N7-MST to the vehicle's wiring.
- Connect the GPS antenna and route it to a location with clear sky view (e.g., dashboard).
- Connect the external microphone and route it to a suitable location (e.g., near the rearview mirror).
- Install the N7-MST unit into the dashboard opening, securing it with the appropriate mounting brackets.
- Reconnect the vehicle's battery and test the unit before reassembling all trim panels.
Figure 1: DYNAVIN N7-MST unit installed in a Ford Mustang dashboard. The image displays the integrated unit with its large touchscreen and physical control buttons below, designed to seamlessly fit the vehicle's interior.
5. Operating Instructions
5.1. Powering On/Off
Press the POWER button (usually located on the front panel) to turn the unit on or off. The unit will typically power on automatically with the vehicle's ignition.
5.2. Touchscreen Interface
The N7-MST features a capacitive touchscreen. Lightly touch the icons or menu options to select them. Swipe gestures may be used for navigation in certain applications.
Figure 2: Main menu interface of the DYNAVIN N7-MST. This screen displays large, clear icons for various functions including radio tuner, navigation, iPod connectivity, phone, media playback, and USB access.
5.3. Main Menu Navigation
The main menu provides access to all primary functions. Tap the corresponding icon to enter a specific mode:
- Tuner: Access FM/AM radio.
- Navigation: Launch the navigation software.
- iPod: Control and play music from a connected iPod/iPhone.
- Telefon (Phone): Access Bluetooth hands-free calling and phonebook.
- Media: Play audio/video from various sources (CD/DVD, USB, SD).
- USB: Access files from a connected USB device.
Figure 3: Secondary menu interface of the DYNAVIN N7-MST. This screen provides access to system settings, information, OBD diagnostics, camera input, and file management.
5.4. Android Link
Android Link allows you to control supported Android applications directly from the N7-MST's screen. To use Android Link, connect your smartphone to the radio via the USB port. The specific interface and available functions depend on the Android Link app installed on your radio.
Figure 4: Additional menu options on the DYNAVIN N7-MST. This view shows icons for CD/DVD playback, SD card access, Bluetooth audio streaming (A2DP), hard disk drive (HDD) access, Android Link, AV input, and digital TV (DVBT).
5.5. Assignable Function Key
The N7-MST features a hardware function key on the front panel (not applicable to N7-6205 models). This button can be assigned to control any desired function. You can change the assigned function at any time through the system settings.
6. Maintenance
6.1. Cleaning the Display
Use a soft, lint-free cloth to clean the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaning solution. Do not use abrasive cleaners or solvents.
6.2. Software Updates
Periodically check the manufacturer's website for available software updates. Updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the update package carefully.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply; Blown fuse; Incorrect wiring. | Check vehicle's fuse box; Verify power connections; Consult installation professional. |
| No sound. | Volume too low; Mute activated; Speaker wiring issue. | Increase volume; Deactivate mute; Check speaker connections. |
| GPS signal lost or inaccurate. | GPS antenna obstructed or disconnected. | Ensure GPS antenna has clear view of sky; Check antenna connection. |
| Bluetooth connection issues. | Device not paired; Bluetooth disabled on phone/unit. | Ensure Bluetooth is enabled on both devices; Re-pair the devices. |
| Touchscreen unresponsive. | System freeze; Software issue. | Perform a soft reset (refer to manual for specific steps); Check for software updates. |
If the problem persists after attempting these solutions, please contact Dynavin customer support or a qualified service technician.
8. Specifications
- Model: N7-MST
- Manufacturer: Dynavin
- Compatible Vehicle: Ford Mustang (Model Years 2010-2014)
- Screen Size: 9 Inch
- Display Type: LCD
- Resolution: 1024 x 600 px
- Human Interface Input: Touchscreen
- Connectivity Technology: USB
- Compatible Devices: Smartphone
- Map Type: NL (Netherlands) - Note: Map availability may vary by region/software version.
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Dynavin website. Keep your proof of purchase for warranty claims.
For technical support, product inquiries, or service requests, please contact Dynavin customer service. Contact details can typically be found on the manufacturer's website or in the product packaging.
Manufacturer: Dynavin
First Available Date: January 15, 2020
