1. Introduction
This manual provides instructions for the installation, care, and maintenance of your Custom Slipcover Replacement for the IKEA Henriksdal Bar Stool with Backrest. This product is designed to refresh the look of your existing Henriksdal bar stool.
Important Note: The bar stool itself is not included with this product. Only the replacement cover is provided.
2. What's Included
Your package contains one (1) Henriksdal Bar Stool Cover Replacement.
Image: The Henriksdal Bar Stool Cover Replacement in Lighter Gray, shown folded.
3. Before Installation
Before installing the cover, please ensure your bar stool is the correct model and size. This cover is specifically designed for the IKEA Henriksdal Bar Stool with Backrest.
Verify the seat width of your Henriksdal bar stool. The cover is designed for a seat width of approximately 18 1/2 inches (46-47 cm).
Image: A Henriksdal bar stool with a measurement overlay indicating a seat width of 46cm to 47cm (18.5 inches). Please measure your stool to ensure compatibility.
4. Installation Guide
Follow these steps to install your new bar stool cover:
- Prepare the Stool: Ensure your Henriksdal bar stool is clean and free of any debris. If there is an existing cover, remove it.
- Orient the Cover: Identify the front and back of the cover. The back part will be taller to accommodate the backrest.
- Slide Over Backrest: Carefully slide the cover over the backrest of the stool, pulling it down evenly.
- Fit the Seat: Once the backrest is covered, pull the cover down over the seat cushion. The elasticized edges will help secure it.
- Adjust and Smooth: Adjust the cover to ensure it fits snugly and smoothly over the entire stool, removing any wrinkles.
Image: Front view of the Henriksdal bar stool with the Lighter Gray cover fully installed, showing a neat fit.
Image: Side view of the Henriksdal bar stool with the Lighter Gray cover fully installed, highlighting the backrest and seat fit.
5. Care and Maintenance
To ensure the longevity and appearance of your bar stool cover, please follow these care instructions:
- Washing: Machine wash cold with like colors.
- Drying: Tumble dry low or hang to dry.
- Bleaching: Do not bleach.
- Ironing: Iron on low heat if necessary.
- General Care: Promptly clean any spills to prevent staining.
Image: A close-up view of the cotton fabric, showing its woven texture.
6. Troubleshooting
- Cover Does Not Fit:
Ensure your bar stool is an IKEA Henriksdal Bar Stool with Backrest. Verify the seat width matches the specified 18 1/2 inches (46-47 cm). This cover is not compatible with other stool models or the Henriksdal chair without a backrest.
- Color Appears Different:
The color of the actual product may vary slightly from the photos due to differences in display screens and lighting conditions. This is normal and not a defect.
7. Specifications
| Product Name | Henriksdal Bar Stool with Backrest Cover Replacement |
| Brand | Custom Slipcover Replacement |
| Model Compatibility | IKEA Henriksdal Bar Stool with Backrest |
| Material | Cotton, Blended |
| Color | Lighter Gray |
| Seat Width Compatibility | 18 1/2 inches (46-47 cm) |
| Care Instructions | Machine Wash |
| Item Weight | 11.7 ounces |
| ASIN | B07J2W2HT1 |
| UPC | 755874040354 |
8. Warranty and Support
This product is designed for durability and quality. For specific warranty information or support inquiries, please refer to the seller's policy on the original purchase platform or contact the manufacturer directly.
Manufacturer: Custom Slipcover Replacement