Introduction
This manual provides essential information for the proper installation and understanding of the Dorman 926-092 Body Mount Retaining Nut. This component is designed to meet original equipment specifications for fit, form, and function, ensuring reliable performance in automotive applications. Please read these instructions carefully before proceeding with installation.
Product Overview
Image: Dorman 926-092 Body Mount Retaining Nut. This image displays the hex-head retaining nut, typically used in body mount applications.
The Dorman 926-092 is a high-quality retaining nut engineered for specific automotive body mount applications. It features a hex fastener type, 3/8-24 UNC thread size, and a machined silver finish. Constructed from alloy steel, this nut is designed for durability and secure fastening.
Specifications
| Brand | Dorman |
| Model Number | 926-092 |
| Material | Alloy Steel |
| Fastener Type | Hex |
| Thread Size | 3/8-24 UNC |
| Thread Style | Unified National Coarse (UNC) |
| Thread Coverage | Fully Threaded |
| Thread Class | Class 2A or Class 2B |
| Exterior Finish | Machined |
| Color | Silver |
| Dimensions (L x W x H) | 3.5 x 2 x 1.37 inches |
| Item Weight | 8.64 ounces |
| Number of Pieces | 1 |
| OEM Part Number | 2L1Z-78101C38-AA |
| UPC | 037495919050 |
Installation Instructions
The Dorman 926-092 Body Mount Retaining Nut is designed for direct replacement and should be installed by a qualified technician or an individual with appropriate automotive repair experience. Always refer to your vehicle's specific service manual for detailed torque specifications and procedures.
Required Tools:
- Appropriate wrench or socket for a hex fastener (size specific to application).
- Torque wrench.
- Vehicle service manual for specific torque values and procedures.
- Safety glasses and gloves.
Installation Steps:
- Safety First: Ensure the vehicle is safely supported on a lift or jack stands on a level surface. Disconnect the battery if necessary, following vehicle manufacturer guidelines.
- Access the Body Mount: Locate the body mount assembly requiring the retaining nut replacement. This may involve removing other components to gain access.
- Remove Old Nut (if applicable): If replacing an existing nut, carefully remove the old fastener using the appropriate tools. Inspect the threads on the body mount stud for damage. Clean any rust or debris from the stud.
- Position the New Nut: Place the Dorman 926-092 retaining nut onto the body mount stud.
- Hand-Tighten: Hand-tighten the nut to ensure it threads correctly without cross-threading.
- Torque to Specification: Using a torque wrench, tighten the nut to the vehicle manufacturer's specified torque value. Refer to your vehicle's service manual for the exact specification. Over-tightening or under-tightening can lead to component failure.
- Final Inspection: Verify that the nut is securely fastened and that all surrounding components are properly reinstalled.
Important: Always follow the vehicle manufacturer's specific instructions for body mount replacement and torque specifications. Failure to do so can compromise vehicle safety and performance.
Operation
Once properly installed and torqued to specification, the Dorman 926-092 Body Mount Retaining Nut functions by securely holding the vehicle's body to its frame. Its design ensures a tight, vibration-resistant connection, contributing to the structural integrity and ride quality of the vehicle. No further operational steps are required beyond correct installation.
Maintenance
The Dorman 926-092 Body Mount Retaining Nut requires minimal maintenance after proper installation. Periodic inspection during routine vehicle service is recommended to ensure its continued integrity:
- Visual Inspection: Check for any signs of corrosion, damage, or loosening.
- Torque Check: If any loosening is suspected or during major suspension/body work, verify the torque of the nut against the vehicle manufacturer's specifications.
- Cleaning: Keep the area around the body mounts free from excessive dirt, salt, and debris to prevent premature corrosion.
If any damage or significant corrosion is observed, replacement of the nut may be necessary to maintain vehicle safety.
Troubleshooting
Most issues related to a body mount retaining nut stem from improper installation or severe operating conditions. Below are common concerns and their potential solutions:
- Nut Will Not Thread On:
- Ensure the correct nut size and thread pitch (3/8-24 UNC) are being used for the stud.
- Inspect the stud threads for damage (e.g., cross-threading, rust, deformation). Clean or repair threads as necessary.
- Verify the nut itself is not damaged.
- Nut Loosens After Installation:
- Confirm the nut was torqued to the vehicle manufacturer's exact specifications using a calibrated torque wrench.
- Inspect the body mount bushing and surrounding components for wear or damage that could lead to movement.
- Ensure no foreign material is preventing proper seating of the nut.
- Corrosion or Rust:
- While the nut is made of alloy steel, exposure to harsh environments can still cause corrosion. Regular cleaning and inspection can help.
- If severe, replacement is recommended to maintain structural integrity.
If issues persist, consult a professional automotive technician.
Warranty Information
Dorman products are manufactured to high-quality standards. For specific warranty details regarding the Dorman 926-092 Body Mount Retaining Nut, please refer to the official Dorman product warranty policy available on the Dorman Products website or contact Dorman customer service directly. Keep your proof of purchase for any warranty claims.
Customer Support
For technical assistance, installation questions, or product inquiries, please contact Dorman Products customer support. You can find contact information and additional resources on the official Dorman Products website.
