GLOBE Electric 67046 58" Floor Lamp Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your GLOBE Electric 67046 58" Floor Lamp. Please read these instructions thoroughly before use and retain them for future reference.

Image 1.1: The GLOBE Electric 67046 Floor Lamp, showcasing its matte black finish and white linen shade.

2. Important Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury to persons:

• Ensure the power is OFF before installing or replacing the bulb.
• Do not connect electricity until your fixture is fully assembled.
• Do not touch the bulb when the fixture is operating.
• Keep flammable materials away from the bulb.
• This lamp is for indoor use only. Do not expose to moisture.
• Use only with E26 medium base bulbs, 60W maximum.
• Always unplug the lamp from the electrical outlet before cleaning or performing any maintenance.
• Do not use with a dimmer unless the bulb is specifically rated for dimmable use.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact GLOBE Electric customer support.

• Lamp Base
• Lamp Pole Sections (typically 2-3 sections)
• Lamp Socket Assembly
• White Linen Rectangular Shade
• Instruction Sheet (this document)
• Assembly Tool (if included, often a small wrench for tightening)

4. Assembly and Installation

Follow these steps to assemble your floor lamp. It is recommended to assemble the lamp on a soft, flat surface to prevent scratching.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out to ensure all items listed in Section 3 are present.
2. Assemble Lamp Pole: Gently thread the lamp pole sections together clockwise until secure. Ensure the electrical cord passes freely through the sections.
3. Attach Pole to Base: Thread the assembled lamp pole onto the lamp base clockwise until it is firmly attached. Ensure the base is stable.
4. Attach Socket Assembly: If separate, thread the socket assembly onto the top of the lamp pole.
5. Install Light Bulb: Screw an E26 medium base bulb (not included, 60W max) into the lamp socket. Do not overtighten.
6. Attach Lamp Shade: Place the white linen rectangular shade onto the socket assembly. The shade typically rests on a ring or clips onto the bulb holder.

Image 4.1: Detail of the E26 socket and shade attachment point.

Once assembled, place the lamp in your desired location, ensuring the 5-foot cord can reach a suitable electrical outlet without being strained or creating a tripping hazard.

5. Operating Instructions

To operate your GLOBE Electric 67046 Floor Lamp:

1. Plug the lamp's power cord into a standard 120V AC electrical outlet.
2. Locate the rotary switch on the lamp socket.
3. Turn the rotary switch clockwise to turn the lamp ON.
4. Turn the rotary switch counter-clockwise to turn the lamp OFF.

Image 5.1: The rotary switch for controlling the lamp's power.

6. Care and Maintenance

Proper care will ensure the longevity and appearance of your lamp.

• Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the metal base and pole. For the linen shade, use a lint roller or a soft, dry brush to remove dust. Do not use abrasive cleaners or solvents.
• Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw in a new E26 medium base bulb (60W max).
• Cord Care: Regularly inspect the power cord for any signs of damage. If the cord is damaged, discontinue use and contact a qualified electrician.

7. Troubleshooting

Refer to the table below for common issues and their solutions.

8. Product Specifications

Image 8.1: Dimensional drawing of the floor lamp.

9. Warranty and Customer Support

According to product information, this item comes with No warranty.

For further assistance, product inquiries, or to report missing/damaged parts, please visit the official GLOBE Electric store or contact their customer service directly.

You can find more information and contact details on the GLOBE Electric Brand Store.