Introduction
Welcome to your Barebones Edison Pendant Light. This manual provides essential information for the safe and effective use of your LED, USB-powered, portable light. Please read this manual thoroughly before operating the product and retain it for future reference.
Image: The Barebones Edison Pendant Light in Antique Bronze, showcasing its vintage design.
Safety Information
- Read all instructions before use to ensure proper operation and prevent damage.
- This product is water-resistant, making it suitable for covered outdoor areas. However, avoid submerging the light in water.
- Use only with compatible USB power sources (e.g., power banks, USB wall adapters) that provide 5 Volts.
- Do not attempt to modify, disassemble, or repair the light. Unauthorized modifications may void the warranty and pose safety risks.
- Dispose of the product responsibly according to local electronic waste regulations.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Verify that all items are present in the package:
- 1 x Barebones Edison Pendant Light (Antique Bronze)
- Integrated USB Cable with inline switch
- Integrated Carabiner for hanging
- User Manual (this document)
Setup and Installation
The Barebones Edison Pendant Light is designed for straightforward setup.
- Unpack and Inspect: Carefully remove the light from its packaging and inspect it for any signs of damage.
- Choose Location: Select a suitable location for hanging the light. The light features an adjustable cord length for versatile placement.
- Hang the Light: Use the integrated carabiner to securely hang the light from a hook, branch, or other stable support.
- Connect Power: Plug the USB cable into a compatible 5V USB power source. This can be a power bank, a USB wall adapter, or a solar generator.
Image: A diagram illustrating key features such as the 10-foot cable, USB power source, water-resistant design, and the ability to connect up to 6 lights.
Image: A close-up view of the USB connector and carabiner, demonstrating the power input and hanging mechanism.
Operating Instructions
The Edison Pendant Light is operated via a simple inline switch.
- Power On: Ensure the light is securely connected to a powered USB source. Locate the inline switch on the USB cable. Press the switch once to turn the light ON.
- Power Off: Press the inline switch again to turn the light OFF.
The light provides a warm, inviting glow. Multiple Edison Pendant Lights can be connected in series, allowing you to link up to 6 lights from a single USB power source.
Image: The Barebones Edison Pendant Light hanging and illuminated in a natural outdoor environment, showcasing its warm light output.
Maintenance and Care
- Cleaning: To clean the light, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or components.
- USB Port Care: Always ensure the USB port and connector are dry before connecting to a power source to prevent electrical damage.
- Storage: When not in use, store the light in a dry, cool place, away from direct sunlight and extreme temperatures.
- Water Exposure: While water-resistant, prolonged exposure to heavy rain or submersion should be avoided to maintain product longevity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power from USB source or loose connection. | Verify the USB power source is active and connected correctly. Try a different USB port or power bank. Ensure the inline switch is in the ON position. |
| Light flickers intermittently | Insufficient power supply or unstable connection. | Ensure a stable USB power connection. Check if the power source can provide adequate current. Inspect the cable for any visible damage. |
| Light is dim or not bright enough | Low power output from the USB source. | Use a USB power source that provides sufficient output (e.g., a standard 5V/1A or higher port). |
Specifications
- Brand: Barebones
- Model Name: LIV-264
- Item Model Number: 20230006004000
- Color: Antique Bronze
- Material: Alloy Steel, Plastic (Shade)
- Light Source Type: LED
- Brightness: 200 Lumens
- Color Temperature: 3000 Kelvin
- Wattage: 1.6 watts
- Voltage: 5 Volts (USB Powered)
- Control Method: Touch (via inline switch)
- Special Feature: Cordless (USB powered, no direct wall outlet required)
- Indoor/Outdoor Usage: Primarily listed as Indoor, but designed with water-resistant features suitable for covered outdoor areas like patios and porches.
- Water Resistance Level: Water Resistant
- Item Weight: 1 Pound
- UPC: 819665012644
Warranty Information
Specific warranty details are not provided in the product data. For information regarding the warranty for your Barebones Edison Pendant Light, please refer to the official Barebones website or contact their customer support directly.
Support
For further assistance, product information, or troubleshooting not covered in this manual, please visit the official Barebones website or contact their customer service department.
Barebones Official Website: www.barebonesliving.com
